journal article·2026-03Open access

Analysis of the interface and strength of diffusion bonding for GH4169 sheets assisted by a nanoscale nickel interlayer

Tanbo Yu, Rui Hou, Zhen Lu, Chengcai Zhang, Wenhui Zhao, Shaosong Jiang

Abstract

The development of a new generation of high thrust-to-weight ratio aeroengines strongly relies on the adoption of thin-walled hollow components made of nickel superalloys for high-end aerospace equipment to achieve structural lightweighting, making high-quality diffusion bonding technology an urgent need. This study aims to address the key issues faced in the diffusion bonding of GH4169 alloys, such as a low interfacial bonding rate, insufficient bonding strength, and easy structural deformation. It proposes the introduction of a nanoscale nickel interlayer to assist in the interfacial diffusion and microstructural evolution of GH4169 alloys. The microstructures, elemental distributions and mechanical properties of the joints at different temperatures are systematically characterized and analyzed by methods such as scanning electron microscopy (SEM), transmission electron microscope (TEM), electron backscatter diffraction (EBSD) and shear testing. The results show that the interlayer of nanoscale nickel, with high-density grain boundaries, serves as a rapid diffusion channel and a source of high-energy driving force, significantly promoting the mutual diffusion of elements and the relaxation of interfacial strain energy and thereby effectively inhibiting the formation of Kirkendall pores and the precipitation of brittle phases such as δ-Ni₃Nb. Under 1050 °C/15 MPa/90 min, the average shear strength of the joint reaches 235.7 MPa. This study reveals that the nanoscale intermediate nickel layer, through the synergistic mechanism of "accelerated diffusion–strain release–brittle phase suppression", thereby establishing a synergistic mechanism for interfacial healing, providing a feasible approach for achieving low-deformation and high-quality bondings in complex GH4169 alloy components for aerospace applications at comparatively lower temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Cellular and Composite Structures · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Effect of process parameters on microscopic uniformity of cross wedge rolling of GH4169 alloy shaft10.1016/j.jmapro.2021.03.063 ↗
2. Effects of deformation processing parameters on the microstructure evolution and microhardness of GH4169 superalloy during annealing treatment10.1002/adem.202100104 ↗
3. Corrigendum to “High cycle fatigue performance and corresponding fracture behaviors of GH4169 studs formed by thread warm rolling process”
4. Deformation characteristics of δ phase in the delta-processed Inconel 718 alloy10.1016/j.matchar.2009.10.003 ↗
5. Effect of static magnetic field and laser parameters on microstructure and tensile properties of laser-deposited GH4169 alloy
6. Experimental study on deformation mechanism around indentation of GH4169 alloy10.1016/j.jallcom.2024.177914 ↗
7. Experimental investigation of milling on Inconel 718 using cryogenic-treated inserts10.1080/10426914.2024.2406765 ↗
8. Microstructure and performance evolution and underlying thermal mechanisms of Ni-based parts fabricated by selective laser melting
9. Enhancing machining quality and tool wear resistance in nickel-based superalloy GH4169 deep hole boring: an optimized boring tool with additional guide pad strategy
10. Nickel-based superalloys
11. Thermo-mechanical fatigue behaviour of an additively manufactured nickel-based superalloy: experiments and crystal plasticity modeling10.1016/j.jmrt.2025.07.138 ↗
12. Prediction and suppression of exit burr height in ultrasonic vibration-assisted micro-drilling of GH4169 superalloy10.1007/s00170-025-16335-8 ↗
13. Hot deformation behavior of GH4169 superalloy with high proportion of recycled material addition and initial dendrite structure10.1016/j.jallcom.2024.176352 ↗
14. Effect of post-processes on the microstructure and mechanical properties of laser powder bed fused IN718 superalloy
15. The development of deformation mechanism during tension at different strain rates for GH4169 superalloys quantified by in-situ acoustic emission
16. A novel method to eliminate Laves phases in Ni-based superalloy laser cladding by in-situ theory10.1016/j.jmatprotec.2025.118972 ↗
17. Adaptive toolpath deposition method for laser net shape manufacturing and repair of turbine compressor airfoils10.1007/s00170-009-2265-7 ↗
18. Microstructure and oxidation resistance of magnetron-sputtered nanoscale NiCoCrAlY coatings on nickel-based superalloy10.1016/j.jallcom.2010.06.112 ↗
19. Enhancing corrosion resistance of nickel-based alloys: a review of alloying, surface treatments, and environmental effects10.1016/j.jallcom.2025.181014 ↗
20. Effect of solution treatment on microstructure and tensile properties of GH3230 superalloy10.1016/j.jallcom.2025.180568 ↗
21. Welding processes for Inconel 718-A brief review
22. 4-Brazing of superalloys and the intermetallic alloy (γ-TiAl)10.1533/9780857096500.2.85 ↗
23. Ott · 2018 · 899
24. Microstructure of diffusion-brazing repaired IN738LC superalloy with uneven surface defect gap width10.1080/13621718.2017.1290338 ↗
25. Induction brazing of Inconel 718 to Inconel X-750 using Ni–Cr–Si–B amorphous foil10.1016/S0924-0136(00)00543-4 ↗
26. Interfacial microstructure evolution and formation process of the joints prepared by diffusion bonding on DD6 nickel-based single crystal superalloy10.1016/j.jmrt.2020.11.083 ↗
27. Strengthening mechanism in the dissimilar CpTi/Inconel 718 joints obtained through diffusion bonding
28. Cracking during solidification of diffusion bonded Inconel 625 in the presence of Zircaloy-4 interlayer10.1016/j.jallcom.2007.02.137 ↗
29. Research on diffusion bonding technology of electrodeposited nano-nickel-cobalt interlayer on titanium alloy, Master's thesis
30. Interface microstructure of TiC cermets/steel explosive cladding plate10.4028/www.scientific.net/KEM.368-372.1614 ↗
31. Reaction-assisted diffusion bonding of Ti6Al4V alloys with Ti/Ni nanostructured multilayers10.1016/j.jmatprotec.2018.05.035 ↗
32. Diffusion Bonding and transient liquid phase(TLP) bonding of type 304 and 316 austenitic stainless steel-A review of similar and dissimilar material joints10.3390/met10050613 ↗
33. Pulse pressuring diffusion bonding of Ti alloy/austenite stainless steel processed by surface self-nanocrystallization10.2355/isijinternational.49.86 ↗
34. Study on interface and mechanical properties of Ti–Al3Ti metal-intermetallic laminate reinforced by Ni-plated woven carbon fibers10.1016/j.msea.2021.142554 ↗
35. Effect of saccharin addition on the microstructure of electrodeposited Fe–36 wt% Ni alloy10.1016/j.surfcoat.2004.11.035 ↗
36. Role of Kirkendall effect in diffusion processes in solids10.1016/S1003-6326(14)63021-1 ↗
37. Inhibiting creep in nanograined alloys with stable grain boundary networks10.1126/science.abq7739 ↗
38. Integrated hollow microfibers of covalent organic framework on Cu foil as a gradient Zn metal anode host for bottom-up deposition
39. Thermodynamic analysis and modification of Gibbs–Thomson equation for melting point depression of metal nanoparticles
40. Growth kinetics and thermal stability of a self-formed barrier layer at Cu-Mn/SiO2 interface10.1063/1.2773699 ↗
41. Diffusion in nanoscale materials10.1016/S0022-3697(02)00421-3 ↗
42. Kaur · 1989