Comparison and evaluation of synergistic Sn/Li effects on hot deformation behavior, microstructural evolution, and constitutive modeling in Mg-Sn-Al-Zn alloys
Source abstract
Abstract
Systematic hot compression tests were performed on TAZ-series alloys (LTAZ5421, LTAZ5321, and TAZ321) with different Sn/Li contents using a Gleeble-3500 thermal simulator at 250-350°C and strain rates of 0.001-0.1 s-1. Results reveal that decreasing peak stress with rising temperature or falling strain rate. LTAZ5421 exhibited the optimal high-temperature deformation resistance (Q=276.15 kJ/mol), owing to solid-solution strengthening and strong Mg2Sn particle pinning. Microstructural observations reveal that dense Mg2Sn particles in LTAZ5421 impede grain boundary migration and restrict DRX (ratio = 10.2%). In contrast, LTAZ5321 achieves the highest DRX ratio (35.6%) and weakest texture (10 MRD) because of weakened particle pinning and Li-induced lowering of stacking fault energy. TAZ321 alloy promotes particle-stimulated nucleation via the low-temperature stable Mg17Al12 phase, yielding a 40% DRX ratio and 9.9 µm refined grains at 250 °C/0.001 s-1. Deformation mechanism analysis indicates that DDRX with necklace-like grains dominates under low-temperature, high-strain-rate conditions, while CDRX controlled by sub-grain rotation prevails at high-temperature, low-strain-rate conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Applications of magnesium alloys for aerospace: a review10.1016/j.jma.2023.09.015 ↗
2. Effect of heat treatment on mechanical properties and microstructure evolution of Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy10.1016/j.jma.2021.05.018 ↗
3. Constitutive modeling and workability characterization of pre-deformed AZ31 magnesium alloy during hot shear-compression deformation10.1016/j.jmrt.2025.07.127 ↗
4. High-strength extruded magnesium alloys: A critical review10.1016/j.jmst.2024.01.089 ↗
5. Hall-Petch relationship in Mg alloys: A review10.1016/j.jmst.2017.07.022 ↗
6. A simultaneous improvement of both strength and ductility by Sn addition in as-extruded Mg-6Al-4Zn alloy10.1016/j.jmst.2019.04.048 ↗
7. Strategy for suppressing abnormal grain growth of ZK60 Mg alloy during solution by pre-compression: A quasi- in-situ study10.1016/j.jmst.2023.07.015 ↗
8. Effect of deformation mode on double-peak texture evolution in pre-twinning Mg-3Al-1Zn alloy during high-speed impacting loading10.1016/j.jallcom.2023.172122 ↗
9. Enhancing fusion welding in die-cast Mg alloys: A combined ultrasonic vibration and hot rolling approach for porosity reduction, microstructure refinement, and mechanical property improvement10.1016/j.jmatprotec.2024.118513 ↗
10. Coordinated deformation characteristics and its effect on microstructure evolution of LA103Z Mg-Li alloy in reciprocating rotary extrusion10.1016/j.jmatprotec.2024.118528 ↗
11. Effect of heat treatment on the microstructure and mechanical properties of a multidirectionally forged Mg-Gd-Y-Zn-Zr-Ag alloy10.1016/j.jma.2021.08.037 ↗
12. Deformation behavior of Mg-13Gd-4Y-2Zn-0.5Zr alloy on the basis of LPSO kinking, dynamic recrystallization and twinning during compression-torsion10.1016/j.matchar.2021.111215 ↗
13. Dynamic recrystallization behavior and strengthening mechanism of Mg–Gd–Y–Zn–Zr alloy during isothermal MDF process10.1016/j.jmrt.2022.09.121 ↗
14. Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments10.1016/j.jallcom.2018.07.343 ↗
15. The deformation behavior of Mg-2Zn-0.1Ca alloy sheet: The role of strain rate10.1016/j.actamat.2024.120633 ↗
16. Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd10.1016/j.actamat.2019.11.034 ↗
17. Enhancing the room-temperature plasticity of magnesium alloys: Mechanisms and strategies10.1016/j.jma.2024.12.008 ↗
18. Unveiling the microstructure evolution based on deformation mechanisms and dynamic recrystallization in as-extruded AZ31 Mg alloys during uniaxial compression10.1016/j.jallcom.2021.162417 ↗
19. Revealing the deformation behavior and resultant texture evolution in extruded dilute Mg-Bi-Sn-Ca alloy during hot compression10.1016/j.msea.2022.143788 ↗
20. Effect of LPSO orientation on the compression behavior and workability of the Mg-5Gd-3Y-1Zn-0.5Zr alloy10.1016/j.msea.2022.144115 ↗
21. Dynamic recrystallization mechanism of high-strength Mg-Gd-Y-Zn-Mn alloy by hot compression deformation10.1016/j.jmrt.2025.01.160 ↗
22. Revealing deformation mechanism of fine-grained Mg alloys via in-situ neutron diffraction analysis10.1016/j.scriptamat.2025.116921 ↗
23. A novel severe plastic deformation method and its effect on microstructure, texture and mechanical properties of Mg-Gd-Y-Zn-Zr alloy10.1016/j.jallcom.2020.153698 ↗
24. Strong and ductile heat-treatable Mg-Sn-Zn-Al wrought alloys10.1016/j.actamat.2015.06.060 ↗
25. Effect of Sn addition on the microstructure and deformation behavior of Mg-3Al alloy10.1016/j.actamat.2016.11.020 ↗
26. Hot Deformation Behaviors of the Mg-3Sn-2Al-1Zn Alloy: Investigation on its Constitutive Equation
27. Microstructure, Hot Deformation Behavior, and Textural Evolution of Mg-3Sn-2Al-1Zn-0.6Nd Alloy10.3390/met12020364 ↗
28. A micro-alloyed Mg-Sn-Y alloy with high ductility at room temperature10.1016/j.msea.2018.08.035 ↗
29. Grain refinement mechanism of Mg-3Sn-1Mn-1La alloy during accumulative hot rolling10.1016/j.jmst.2021.02.052 ↗
30. Preparation of ultra-high ductility and high strength Mg-Sn-Zn-Zr alloy by differential thermal ECAP (DT-ECAP) induced heterogeneous structure10.1016/j.jmst.2024.01.095 ↗
31. Insights into the structures and elastic properties of Mg-Sn compounds with superconductivity10.1016/j.vacuum.2023.112265 ↗
32. A New Anti-Alias Model of Ab Initio Calculations of the Generalized Stacking Fault Energy in Face-Centered Cubic Crystals10.3390/cryst13030461 ↗
33. Effects of minor Ca addition on microstructure and mechanical properties of the Mg-4.5Zn-4.5Sn-2Al-based alloy system10.1016/j.jallcom.2012.08.102 ↗
34. Effect of strain-induced precipitation on dynamic recrystallization in Mg-Al-Sn alloys10.1016/j.msea.2014.08.032 ↗
35. Effect of dynamic precipitation and twinning on dynamic recrystallization of micro-alloyed Mg-Al-Ca alloys10.1016/j.msea.2013.08.019 ↗
36. A new high-strength extruded Mg-8Al-4Sn-2Zn alloy10.1016/j.matlet.2014.10.033 ↗
37. Dynamic recrystallization behavior of Mg-Li-Al-Nd duplex alloy during hot compression10.1016/j.jallcom.2015.03.144 ↗
38. Microstructure and corrosion behavior of as-homogenized Mg-xLi-3Al-2Zn-0.2Zr alloys (x=5, 8, 11 wt%)10.1016/j.matchar.2019.110031 ↗
39. Ex-situ EBSD investigation of the reduced c/a values and work hardening behavior in Mg-4Li-1Al-0.5Y alloy under hot compression10.1016/j.msea.2020.140113 ↗
40. Hot Deformation Behavior and Microstructure Evolution of Annealed CrFeCoNiAl0.1 High Entropy Alloy10.1007/s11665-023-08451-x ↗
41. Hot deformation behaviors of an ultrafine-grained MoNbTaTiV refractory high-entropy alloy fabricated by powder metallurgy10.1016/j.msea.2021.140922 ↗
42. Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression10.1016/j.matchar.2018.08.028 ↗
43. Hot deformation behavior of Mg-5Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, processing map, and microstructure evolution10.1016/j.jallcom.2023.168983 ↗
44. Enhanced strength and ductility in Mg-9Gd-4Y–2Zn-0.5Zr alloy under high-temperature compression enabled by the LPSO phase10.1016/j.jmrt.2025.07.294 ↗
45. Organisational evolution and property enhancement induced by thermal deformation behaviour during precision forming of large structural components of Al0.1 CoCrFeNiRE high-entropy alloy10.1016/j.jmst.2025.11.033 ↗
46. Optimizing hot workability of Al0.1CoCrFeNiRE high-entropy alloy for precision-formed components: Insights into dynamic recrystallization and deformation behavior10.1016/j.jallcom.2026.186602 ↗
47. Effects of Sn addition on dynamic recrystallization of Mg-5Zn-1Mn alloy during high strain rate deformation10.1016/j.msea.2018.08.001 ↗
48. Influence of Zn and Y on Hot Compression Behavior of Mg-Li-Zn-Y Alloy10.1007/s40195-025-01936-9 ↗
49. Constitutive Modeling and Hot Deformation Behavior of Duplex Structured Mg-Li-Al--Sr Alloy10.1016/j.jmst.2016.11.015 ↗
50. An investigation on the hot workability and microstructural evolution of a novel dual-phase Mg-Li alloy by using 3D processing maps10.1016/j.jmrt.2023.02.110 ↗
51. Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression10.1016/j.msea.2021.142026 ↗
52. Hot deformation behavior and microstructure evolution of ZK21 magnesium alloy10.1016/j.msea.2010.03.016 ↗
53. Abnormal creep stress exponents in a high-pressure die casting Mg-Al- RE alloy10.1016/j.msea.2021.142203 ↗
54. Constitutive modeling of dynamic recrystallization kinetics and processing maps of Mg-2.0Zn-0.3Zr alloy based on true stress-strain curves10.1016/j.msea.2013.01.013 ↗
55. Influence of Gd element content (9, 13 wt%) on the hot deformation behavior and microstructure evolution of Mg-Gd-Y-Zn-Zr alloys10.1016/j.jmrt.2025.10.161 ↗
56. Effects of Sn and Y on the microstructure, texture, and mechanical properties of as-extruded Mg-5Li-3Al-2Zn alloy10.1016/j.msea.2018.05.030 ↗
57. The hot deformation behavior, microstructure evolution and texture types of as-cast Mg–Li alloy10.1016/j.jallcom.2020.154868 ↗
58. Flow stress behavior of AZ61 magnesium alloy during hot compression deformation10.1016/j.matdes.2013.07.023 ↗
59. Hot Deformation Behavior of LA43M Mg-Li Alloy via Hot Compression Tests10.1007/s11665-019-04500-6 ↗
60. Deformation behavior, microstructure evolution and phase transformation of dual-phase Mg-Li-Zn-Sr-Ca alloy under isothermal compression10.1016/j.jallcom.2024.175933 ↗
61. The serrated flow and recrystallization in dispersion hardened Cu-Cr-Nb alloy during hot deformation10.1016/j.msea.2016.07.014 ↗
62. Effect of refinement of grains and icosahedral phase on hot compressive deformation and processing maps of Mg-Zn-Y magnesium alloys with different volume fractions of icosahedral phase10.1016/j.jmst.2018.06.019 ↗
63. Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets10.1016/j.msea.2017.05.110 ↗
64. Plastic deformation and heat treatment of Mg-Li alloys: a review10.1016/j.jmst.2021.04.072 ↗
65. Microstructure and mechanical properties of as-cast and extruded Mg-8Li-1Al-0.5Sn alloy10.1016/j.msea.2017.10.036 ↗
66. Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression10.1016/j.matchar.2018.08.028 ↗
67. Effect of Sn microalloying on the hot deformation behavior of Mg-Gd-Y-Zn-Zr alloy10.1016/j.jallcom.2025.179813 ↗
68. Effect of Ce addition on microstructure evolution and precipitation in Cu-Co-Si-Ti alloy during hot deformation10.1016/j.jallcom.2020.155666 ↗
69. Interaction of dynamic precipitation and dynamic recrystallization of a Mg-4Sn-3Al-1Zn alloy during hot compression10.1016/j.jallcom.2023.172434 ↗
70. Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process10.1016/j.msea.2020.139937 ↗
71. Effect of Sn on the microstructure evolution of AZ80 magnesium alloy during hot compression10.1016/j.jallcom.2017.07.225 ↗
72. Enhanced strength and ductility in TAZN3210 magnesium alloy via a novel Forward-Parallel Channel Extrusion10.1016/j.matchar.2025.115249 ↗
73. Microstructure evolution and dynamic recrystallization mechanism of tantalum-tungsten alloys under hot compression10.1016/j.jallcom.2024.177063 ↗
74. Microstructure evolution and dynamic recrystallization mechanism of CoCrFeNiAl0.1RE alloys under hot compression10.1016/j.jallcom.2025.182244 ↗
75. Constitutive behavior analysis of Al-Mg-Si-Sc alloy with a two-stage physical-based model
76. Strain-induced heterogeneous bimodal microstructure behavior of Mg-Gd-Y-Zn-Zr alloy containing LPSO phase during hot compression10.1016/j.jmrt.2023.10.262 ↗
77. Correlations between two EBSD-based metrics Kernel Average Misorientation and Image Quality on indicating dislocations of near-failure low alloy steels induced by tensile and cyclic deformations
78. Unveiling anomalous strengthening and deformation mechanism evolution in a Mg-Gd-Y-Zr alloy under rate-temperature coupling effects10.1016/j.jma.2025.03.018 ↗
79. Hot compression, processing map, microstructure evolution and dynamic recrystallization mechanism of Mg-9Gd-1.5Zn-0.8Al alloy10.1016/j.jallcom.2026.186350 ↗
80. Achieving well-balanced strength-ductility synergy in Mg-Sn-Al-Zn-Y alloy: Focusing on extrusion process10.1016/j.jmapro.2025.01.049 ↗
81. Study on the low mechanical anisotropy of extruded Mg-Zn-Mn-Ce-Ca alloy tube in the compression process10.1016/j.jma.2022.07.001 ↗
82. A comparative study on the microstructural features and mechanical properties of an Mg-Zn alloy processed by ECAP and SSE10.1016/j.msea.2022.143218 ↗
83. Research on hot deformation behavior and microstructure characterization of Mg-Nd-Zn-Zr magnesium alloy prepared by wire arc additive manufacturing10.1016/j.jallcom.2025.183744 ↗
84. Hot deformation behavior and mechanism of a new metastable β titanium alloy Ti-6Cr-5Mo-5V-4Al in single phase region10.1016/j.msea.2021.141231 ↗
85. A constitutive relation of AZ80 magnesium alloy during hot deformation based on Arrhenius and Johnson-Cook model10.1016/j.jmrt.2019.01.003 ↗
86. Revealing the deformation behavior and microstructure evolution in Mg-12Y–1Al alloy during hot compression10.1016/j.jallcom.2023.169462 ↗
87. Comparison and evaluation of different constitutive models for predicting the hot deformation behavior of Mg-Gd-Y-Zr alloy10.1016/j.jma.2024.08.004 ↗
88. Dynamic mechanical behavior of magnesium alloys: a review10.3139/146.111846 ↗
89. Enhanced dynamic compression properties of a low density near-α titanium alloy associated with deformation induced laminated microstructure and dynamic segregation10.1016/j.actamat.2024.120653 ↗
90. Designing strong and stiff HCP and BCC Mg alloy structures by templating hard faceted phase using Sn and RE elements10.1016/j.jallcom.2023.173291 ↗
91. Effects of Mg17Al12 second phase particles on twinning-induced recrystallization behavior in Mg-Al-Zn alloys during gradient hot rolling10.1016/j.jmst.2019.05.017 ↗
92. Twinning and dynamic recrystallization of Mg-7Sn-3Zn alloy under high strain rate hot compression10.1016/j.msea.2021.140986 ↗
93. Interphase boundary segregation of silver and enhanced precipitation of Mg17Al12 Phase in a Mg-Al-Sn-Ag alloy10.1016/j.scriptamat.2018.05.047 ↗
94. Deformation behavior of Mg-13Gd-4Y-2Zn-0.5Zr alloy on the basis of LPSO kinking, dynamic recrystallization and twinning during compression-torsion10.1016/j.matchar.2021.111215 ↗
95. Unified modeling of work hardening and flow softening in two-phase titanium alloys considering microstructure evolution in thermomechanical processes10.1016/j.jallcom.2018.07.079 ↗
96. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
97. Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273 K10.1016/j.actamat.2014.09.023 ↗
98. Texture evolution induced by twinning and dynamic recrystallization in dilute Mg-1Sn-1Zn-1Al alloy during hot compression10.1016/j.jma.2019.10.002 ↗
99. Experimental study on tensile deformation behaviors under room and elevated temperatures induced by microstructure inhomogeneity of ZK60 Mg with a longitudinal weld10.1016/j.jma.2022.11.013 ↗
100. Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg-9.80Gd-3.78Y-1.12Sm-0.48Zr alloy10.1016/j.jma.2020.06.001 ↗