journal article·2026-08

Strain rate-temperature synergy governing hot deformation behavior and dynamic recrystallization in Mg-3Sn-2Al-1Zn-RE alloys: Quantitative characterization via arrhenius constitutive model

Shang Xie, Weiguo Yang, Yuhang Guo, Qing Dong, Qianhao Zang, Ye Cheng, Hongfu Xiang, Weili Cheng, Xuguang Dong, Zhenya Zhang

Publisher page

Abstract

To clarify the regulatory influence of trace rare earth elements on the DRX behavior during the hot deformation of magnesium alloys, we performed hot compression experiments on TAZ321-0.6Y, TAZ321-0.6Nd, and TAZ321 alloys at temperature/strain rate combinations of 250℃-350℃ and 0.1 s-1-0.001 s-1. This investigation focuses on the hot deformation behavior and DRX evolution mechanisms under the combined effects of strain rate and temperature. The results show that the rare earth elements Y and Nd can differentially regulate DRX via the precipitation of second phases. The Al2Y phase continuously pins grain boundaries, keeping the DRX fraction of the alloy below 6.2% over the entire temperature range. The Al2Nd phase dissolves at high temperatures, leading to a sharp decrease in the DRX fraction to 0.5% at 350 ℃/0.001 s-1. Conversely, Mg2Sn/Mg17Al12 phases in the TAZ321 alloy facilitate heterogeneous nucleation, significantly elevating the DRX fraction to 43.4% at 350℃/0.1 s-1. This explains how RE-containing phases govern microstructural evolution via grain boundary pinning and high-temperature dissolution under coupled strain rate-temperature circumstances, offering essential insights for enhancing RE-TAZ alloy hot working procedures. ​
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Superconductivity in MgB2 and Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Sustainable magnesium recycling: Insights into grain refinement through plastic deformation-assisted solid-state recycling (SSR)10.1016/j.jma.2024.10.016 ↗
2. Investigation of constitutive models and microstructure evolution during hot deformation and solution treatment of Al-Zn-Mg-Cu alloy10.1016/j.jmrt.2024.07.201 ↗
3. Microstructure and mechanical properties of Mg-4Zn-xGd (x=0, 0.5, 1, 2) alloys10.1016/j.jma.2019.06.005 ↗
4. Optimizing hot workability of Al0.1CoCrFeNiRE high-entropy alloy for precision-formed components: Insights into dynamic recrystallization and deformation behavior10.1016/j.jallcom.2026.186602 ↗
5. Effects of Sn on the microstructure and mechanical properties of a hot-extruded Mg-Zn-Y-Sn alloy10.1016/j.msea.2018.03.045 ↗
6. Effects of Zn additions on the microstructure and hardness of Mg-9Al-6Sn alloy10.1016/j.matchar.2016.01.021 ↗
7. Effect of RE elements on the microstructural and mechanical properties of as-cast and age hardening processed Mg-4Al-2Sn alloy10.1016/j.jma.2018.07.003 ↗
8. Effect of Er addition on recrystallization, texture, and mechanical properties in a binary Mg-Er alloy10.1016/j.msea.2025.148489 ↗
9. Dynamic recrystallization behavior and texture evolution during extrusion of Mg-2.0Y-2.0Zn-2.0Al-0.3Mn alloy10.1016/j.jallcom.2025.180499 ↗
10. Texture tailoring of a cold-rolled Mg-Zn-Gd alloy by electropulse treatment: The effect of electropulse and Gd element10.1016/j.matchar.2022.112046 ↗
11. Effect of Nd addition on the microstructure and mechanical properties of extruded Mg-Gd-Zr alloy10.1016/j.msea.2021.141320 ↗
12. Synergic effects of Gd and Y contents on the age-hardening response and elevated-temperature mechanical properties of extruded Mg-Gd (-Y)-Zn-Mn alloys10.1016/j.msea.2021.141019 ↗
13. Indentation creep Behavior of AE42 and Mg-Al-RE-Ca alloys
14. High strength magnesium alloy with α-Mg and W-phase processed by hot extrusion10.1016/S1003-6326(11)61020-0 ↗
15. Microstructure, mechanical properties and corrosion properties of Mg-Zn-Y alloys with low Zn content10.1016/j.msea.2007.10.056 ↗
16. Al-Nd intermetallic phase stability and its effects on mechanical properties and corrosion resistance of HPDC Mg-4Al-4Nd-0.2Mn alloy10.1016/j.jallcom.2016.08.310 ↗
17. Recent research and developments on wrought magnesium alloys10.1016/j.jma.2017.09.001 ↗
18. Dynamic recrystallization behaviors of Mg-Gd-Y-Zn-Zr alloy with different morphologies and distributions of LPSO phases10.1016/j.msea.2017.12.103 ↗
19. Electrochemical corrosion behavior of Mg–5Al–0.4Mn–xNd in NaCl solution10.1016/j.corsci.2009.03.019 ↗
20. Hot deformation behavior of extruded Mg-Zn-Y-Zr alloy10.1016/j.jallcom.2015.04.217 ↗
21. Grain refinement mechanism and improved mechanical properties in Mg-Sn alloy with trace Y addition10.1016/j.jallcom.2019.153122 ↗
22. Microstructure evolution and dynamic recrystallization mechanism of CoCrFeNiAl0.1RE alloys under hot compression10.1016/j.jallcom.2025.182244 ↗
23. Microstructure evolution and mechanical properties of Mg94Sn3Al2Zn1 alloy under different extrusion processes10.1016/j.msea.2024.146834 ↗
24. The interaction between dynamic recrystallization and twinning during the hot compression in a novel nickel-based superalloy10.1016/j.jmrt.2025.01.157 ↗
25. The dynamic recrystallization induced by Al2Nd and promoted by Al2RE in a hot compressed Mg-1Al-1.5Nd-1.5Y-0.5Gd alloy10.1016/j.jmrt.2024.11.124 ↗
26. Insight into the hot deformation behavior and recrystallization mechanism of Mg-Y-RE alloys based on machine learning10.1016/j.jma.2025.09.027 ↗
27. Hot deformation behavior of Mg-5Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, processing map, and microstructure evolution10.1016/j.jallcom.2023.168983 ↗
28. The serrated flow and recrystallization in dispersion hardened Cu-Cr-Nb alloy during hot deformation10.1016/j.msea.2016.07.014 ↗
29. Microstructural evolutions and mechanical properties of Mg-xY-2Nd-0.2Zn-0.5Zr (x=0, 2, 4, 6 and 8) alloy under hot compression10.1016/j.msea.2019.138816 ↗
30. Effect of refinement of grains and icosahedral phase on hot compressive deformation and processing maps of Mg-Zn-Y magnesium alloys with different volume fractions of icosahedral phase10.1016/j.jmst.2018.06.019 ↗
31. Achieving well-balanced strength-ductility synergy in Mg-Sn-Al-Zn-Y alloy: Focusing on extrusion process10.1016/j.jmapro.2025.01.049 ↗
32. Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression10.1016/j.matchar.2018.08.028 ↗
33. Effect of Sn microalloying on the hot deformation behavior of Mg-Gd-Y-Zn-Zr alloy10.1016/j.jallcom.2025.179813 ↗
34. The hot compressive deformation behavior of cast Mg-Gd-Y-Zn-Zr alloys with and without LPSO phase in their initial microstructures10.1016/j.jma.2022.01.006 ↗
35. Hot compression behavior of the Mg-Gd-Y-Zn-Zr alloy filled with intragranular long-period stacking ordered phases10.1016/j.jallcom.2017.07.088 ↗
36. Constitutive modeling of dynamic recrystallization kinetics and processing maps of Mg-2.0Zn-0.3Zr alloy based on true stress-strain curves10.1016/j.msea.2012.10.025 ↗
37. Hot deformation behavior and microstructure evolution of ZK21 magnesium alloy10.1016/j.msea.2010.03.016 ↗
38. Effect of pre-annealing aging treatment on the hot compression behavior and dynamic recrystallization mechanism of Mg-Gd-Y-Zn-Zr alloy
39. Hot deformation behavior and microstructure evolution of Mg-Gd-Sm(-Zn)-Zr alloys10.1007/s12613-024-2982-9 ↗
40. Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process10.1016/j.msea.2020.139937 ↗
41. Revealing the deformation behavior and resultant texture evolution in extruded dilute Mg-Bi-Sn-Ca alloy during hot compression10.1016/j.msea.2022.143788 ↗
42. Texture evolution and effect on mechanical properties of repetitive upsetting-extruded and heat treatment Mg-Gd-Y-Zn-Zr alloy containing LPSO phases10.1016/j.jallcom.2022.168666 ↗
43. Microstructure evolution and dynamic recrystallization mechanism of tantalum-tungsten alloys under hot compression10.1016/j.jallcom.2024.177063 ↗
44. Hot compression deformation behavior and dynamic recrystallization of a precipitate-free Mg-Bi-Sn alloy10.1016/j.jmrt.2023.05.265 ↗
45. Revealing the deformation behavior and microstructure evolution in Mg-12Y-1Al alloy during hot compression10.1016/j.jallcom.2023.169462 ↗
46. Constitutive behavior analysis of Al-Mg-Si-Sc alloy with a two-stage physical-based model
47. Interaction of dynamic precipitation and dynamic recrystallization of a Mg-4Sn-3Al-1Zn alloy during hot compression10.1016/j.jallcom.2023.172434 ↗
48. Microalloyed Zn-Mn alloys: From extremely brittle to extraordinarily ductile at room temperature10.1016/j.matdes.2018.02.049 ↗
49. Hot deformation behaviour and microstructure evolution of Al-3% Mg2Si alloy10.1016/j.matchar.2021.111623 ↗
50. Twinning and dynamic recrystallization of Mg-7Sn-3Zn alloy under high strain rate hot compression10.1016/j.msea.2021.140986 ↗
51. Unveiling anomalous strengthening and deformation mechanism evolution in a Mg-Gd-Y-Zr alloy under rate-temperature coupling effects10.1016/j.jma.2025.03.018 ↗
52. Strain rate dependence of dynamic recrystallization and texture evolution in hot compressed Mg-Gd-Er-Zr alloy10.1016/j.jma.2023.10.006 ↗
53. Research on hot deformation behavior and microstructure characterization of Mg-Nd-Zn-Zr magnesium alloy prepared by wire arc additive manufacturing10.1016/j.jallcom.2025.183744 ↗
54. Hot deformation behavior and mechanism of a new metastable β titanium alloy Ti–6Cr–5Mo–5V–4Al in single phase region10.1016/j.msea.2021.141231 ↗
55. A constitutive relation of AZ80 magnesium alloy during hot deformation based on Arrhenius and Johnson-Cook model10.1016/j.jmrt.2019.01.003 ↗
56. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg-Y alloys10.1016/j.actamat.2010.08.031 ↗
57. Enhanced strength and ductility in TAZN3210 magnesium alloy via a novel Forward-Parallel Channel Extrusion10.1016/j.matchar.2025.115249 ↗
58. Enhanced dynamic compression properties of a low density near-α titanium alloy associated with deformation induced laminated microstructure and dynamic segregation10.1016/j.actamat.2024.120653 ↗
59. Effect of grain size on the yield stress and microscopic mechanism of a near-a titanium alloy during non-superplastic hot deformation10.1016/j.msea.2022.142932 ↗
60. Effects of Mg17Al12 second phase particles on twinning-induced recrystallization behavior in Mg-Al-Zn alloys during gradient hot rolling10.1016/j.jmst.2019.05.017 ↗
61. Interphase boundary segregation of silver and enhanced precipitation of Mg17Al12 Phase in a Mg-Al-Sn-Ag alloy10.1016/j.scriptamat.2018.05.047 ↗
62. Deformation behavior of Mg-13Gd-4Y-2Zn-0.5Zr alloy on the basis of LPSO kinking, dynamic recrystallization and twinning during compression-torsion10.1016/j.matchar.2021.111215 ↗
63. Unified modeling of work hardening and flow softening in two-phase titanium alloys considering microstructure evolution in thermomechanical processes10.1016/j.jallcom.2018.07.079 ↗
64. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
65. Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273 K10.1016/j.actamat.2014.09.023 ↗
66. Experimental study on tensile deformation behaviors under room and elevated temperatures induced by microstructure inhomogeneity of ZK60 Mg with a longitudinal weld10.1016/j.jma.2022.11.013 ↗
67. Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg-9.80Gd-3.78Y-1.12Sm-0.48Zr alloy10.1016/j.jma.2020.06.001 ↗
68. Texture evolution induced by twinning and dynamic recrystallization in dilute Mg-1Sn-1Zn-1Al alloy during hot compression10.1016/j.jma.2019.10.002 ↗
69. Texture development in friction stir welds10.1179/1362171811Y.0000000010 ↗
70. Organisational evolution and property enhancement induced by thermal deformation behaviour during precision forming of large structural components of Al0.1CoCrFeNiRE high-entropy alloy10.1016/j.jmst.2025.11.033 ↗
71. Unique hot deformation behavior and microstructure evolution of a dual FCC-phase CoCrCu1.2FeNi high entropy alloy10.1016/j.jallcom.2021.160102 ↗
72. Dynamic precipitation and recrystallization mechanism during hot compression of Mg-Gd-Y-Zr alloy10.1016/j.jmrt.2021.08.013 ↗
73. Deformation-induced dynamic precipitation of 14H-LPSO structure and its effect on dynamic recrystallization in hot-extruded Mg-Y-Zn alloys10.1016/j.ijplas.2023.103573 ↗
74. Research on design and microstructure of hot-dip Zn-Al-Mg/Sn alloy10.1016/j.matchar.2022.111746 ↗
75. Dynamic recrystallization behavior of particle reinforced Mg matrix composites fabricated by stir casting10.1016/j.msea.2012.02.077 ↗
76. A two-site mean field model of discontinuous dynamic recrystallization10.1016/j.msea.2011.06.023 ↗