journal article·2023-01-02Open access

The effect of groove and notch tip angles on testing fracture toughness by SEVNB method: models and experimental validation

Jinping Cui, Kang Guan, Pinggen Rao, Cheng Peng, Qingfeng Zeng, Jiantao Liu, Shuyan Yu

Abstract

The single-edged V-notch beam (SEVNB) method is considered as an effective method for evaluating the fracture toughness values of brittle materials. In this method, it is assumed that the V-notch is a natural crack. However, this assumption may cause an overestimation of the fracture toughness due to the “notch passivation effect”. To investigate the effects of the V-notch and groove tip angles on the fracture toughness testing of ceramic materials, three typical models were established in this work. The stress intensity factors of these models were calculated using a J-integral based on the linear finite element method (LFEM). The results indicated that the measured fracture toughness values could be overestimated by 0.5%- 13.7% when the angle of the V-notch tip increased from 10° to 60°. Increasing the angle formed by the V-notch and groove from 10° to 60°, fracture toughness was overevaluated by about 0% – 2.0%. When the angle formed by the V-notch and groove increased to 120°, the fracture toughness was overevaluated by about 31%. Finally, two equations were fitted to assess the angles effects on fracture toughness, and the results have been validated by experiments. An important reference for the SEVNB method can be found in this work.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Fatigue and fracture mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, South China University of Technology, Guangzhou, Guangdong, China

Chaozhou Three Circle Company Limited, Chaozhou, Guangdong, China

Science and Technology on Thermostructural Composite Materials Laboratory, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an, Shaanxi, China

National Engineering Research Center of Ceramic Matrix Composite Manufacture Technology, Xi’an, Shaanxi, China

MSEA International Institute for Materials Genome, Gu’an, Hebei, China

School of Mechanical Engineering, Southwest Jiaotong University, Chengdu, Sichuan, China

School of Materials and Energy, South China Agricultural University, Guangzhou, Guangdong, China

Funding

Fundamental Research Funds for the Central Universities · National Natural Science Foundation of China · Science and Technology Planning Project of Guangdong Province · China Postdoctoral Science Foundation · Year YangFan Innovative & Entrepreneurial Research Team Project of Guangdong Province of China

References (30)

Show source-provided references
1. Launey ME · Adv Mater · 2009 · 21 · 03
2. 10.1111/j.1551-2916.2006.01447.x10.1111/j.1551-2916.2006.01447.x ↗
3. 10.1111/j.1151-2916.1988.tb05049.x10.1111/j.1151-2916.1988.tb05049.x ↗
4. Kübler J, Fracture toughness of ceramics using the SEVNB method; round robin. VAMAS-Report No. 37, EMPA, Dübendorf, 1999.
5. 10.1016/j.jeurceramsoc.2005.02.01610.1016/j.jeurceramsoc.2005.02.016 ↗
6. 10.1016/j.tafmec.2009.10.00110.1016/j.tafmec.2009.10.001 ↗
7. 10.1111/j.1151-2916.1994.tb07038.x10.1111/j.1151-2916.1994.tb07038.x ↗
8. 10.1016/0955-2219(95)00197-210.1016/0955-2219(95)00197-2 ↗
9. 10.1016/S0955-2219(97)00024-110.1016/S0955-2219(97)00024-1 ↗
10. 10.1016/j.jeurceramsoc.2004.01.01010.1016/j.jeurceramsoc.2004.01.010 ↗
11. 10.1016/j.dental.2007.06.02110.1016/j.dental.2007.06.021 ↗
12. 10.1016/j.jeurceramsoc.2014.05.02110.1016/j.jeurceramsoc.2014.05.021 ↗
13. 10.1016/j.jeurceramsoc.2014.05.00910.1016/j.jeurceramsoc.2014.05.009 ↗
14. 10.1016/j.jeurceramsoc.2014.12.02410.1016/j.jeurceramsoc.2014.12.024 ↗
15. Fett T · 1997
16. 10.1016/j.jeurceramsoc.2015.05.00510.1016/j.jeurceramsoc.2015.05.005 ↗
17. 10.1016/j.jeurceramsoc.2018.12.05410.1016/j.jeurceramsoc.2018.12.054 ↗
18. ASTM C1421-10, Standard test methods for determination of fracture toughness of advanced ceramics at ambient temperature, 2011.
19. 10.1111/j.1151-2916.1984.tb19715.x10.1111/j.1151-2916.1984.tb19715.x ↗
20. 10.1016/j.jeurceramsoc.2017.05.02710.1016/j.jeurceramsoc.2017.05.027 ↗
21. 10.1016/j.jeurceramsoc.2017.10.00710.1016/j.jeurceramsoc.2017.10.007 ↗
22. 10.1016/j.jeurceramsoc.2017.12.04910.1016/j.jeurceramsoc.2017.12.049 ↗
23. 10.1002/9780470314555.ch3010.1002/9780470314555.ch30 ↗
24. 10.1016/j.ijrmhm.2015.05.01210.1016/j.ijrmhm.2015.05.012 ↗
25. 10.1111/j.1151-2916.2000.tb01221.x10.1111/j.1151-2916.2000.tb01221.x ↗
26. 10.1007/BF0055320010.1007/BF00553200 ↗
27. Sakuma T · Sci. Technol. Zirconia III. Adv. Ceram · 1988 · 24 · 357
28. 10.1016/j.ceramint.2017.04.06410.1016/j.ceramint.2017.04.064 ↗
29. 10.1016/j.ceramint.2014.08.13010.1016/j.ceramint.2014.08.130 ↗
30. 10.1007/s41779-018-0264-610.1007/s41779-018-0264-6 ↗