ZrO 2 -toughened Al 2 O 3 composites with better fracture and wear resistance properties
Source abstract
Abstract
In view of the importance of the fracture resistance and wear properties on the performance and durability in a number of engineering applications, we have analysed such properties of sintered zirconia toughened alumina with varying zirconia content of 5 and 15 wt.%. Using micro-computed tomography, homogenous particulate distribution of zirconia is established through 3D volume rendering of the sintered pellet and by 2D orthoslice view. Depending on zirconia content and MgO addition (sintering additive), an interesting combination of strength and toughness properties was recorded with the investigated materials. While explaining the origin of cracking on worn surfaces of optimized zirconia toughened alumina, theoretical calculations revealed that the maximum tensile stress at the trailing edge of sliding contact is higher than critical damage stress. Such analysis incorporates the effect of factors such as the internal stresses due to thermal expansion anisotropy of non-cubic Al 2 O 3 matrix, mismatch in elastic modulus/thermal expansion and athermal ZrO 2 phase transformation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Research Centre, Indian Institute of Science, Bangalore, India
Department of Ceramic Engineering, National Institute of Technology, Rourkela, India
Centre for Biosystems Science and Engineering, Indian Institute of Science, Bangalore, India
References (29)
Show source-provided references
1. Basu Bi and Kantesh B. Advanced Structural Ceramics . John Wiley & Sons, New Jersey 2011.10.1002/9781118037300 ↗
2. 10.1016/j.jmbbm.2013.03.02210.1016/j.jmbbm.2013.03.022 ↗
3. 10.1016/j.jallcom.2012.11.06410.1016/j.jallcom.2012.11.064 ↗
4. 10.1016/j.jallcom.2003.09.15710.1016/j.jallcom.2003.09.157 ↗
5. 10.1016/S0955-2219(99)00274-510.1016/S0955-2219(99)00274-5 ↗
6. 10.1016/j.compositesa.2006.01.00510.1016/j.compositesa.2006.01.005 ↗
7. 10.1016/S0924-0136(03)00396-010.1016/S0924-0136(03)00396-0 ↗
8. 10.1016/S1359-6462(02)00440-210.1016/S1359-6462(02)00440-2 ↗
9. 10.1016/j.msea.2003.08.06310.1016/j.msea.2003.08.063 ↗
10. 10.1016/j.jeurceramsoc.2005.05.00810.1016/j.jeurceramsoc.2005.05.008 ↗
11. 10.1016/0043-1648(94)06544-610.1016/0043-1648(94)06544-6 ↗
12. 10.1016/S0043-1648(00)00429-410.1016/S0043-1648(00)00429-4 ↗
13. 10.1002/adem.20160014710.1002/adem.201600147 ↗
14. 10.1017/CBO978113917173110.1017/CBO9781139171731 ↗
15. 10.1016/j.ceramint.2014.09.00610.1016/j.ceramint.2014.09.006 ↗
16. 10.1016/j.ijrmhm.2010.12.00810.1016/j.ijrmhm.2010.12.008 ↗
17. 10.1016/j.jeurceramsoc.2004.03.01310.1016/j.jeurceramsoc.2004.03.013 ↗
18. 10.1016/j.wear.2013.03.04810.1016/j.wear.2013.03.048 ↗
19. Buckley DH. Surface effects in adhesion, friction, wear, and lubrication . Amsterdam: Elsevier, 1981.
20. 10.1016/S0272-8842(88)80007-510.1016/S0272-8842(88)80007-5 ↗
21. 10.1016/j.actamat.2010.05.02710.1016/j.actamat.2010.05.027 ↗
22. 10.1016/j.ceramint.2014.03.15310.1016/j.ceramint.2014.03.153 ↗
23. 10.1179/174328005X4111310.1179/174328005X41113 ↗
24. 10.1111/j.1151-2916.1989.tb09718.x10.1111/j.1151-2916.1989.tb09718.x ↗
25. 10.1016/0043-1648(94)07030-X10.1016/0043-1648(94)07030-X ↗
26. 10.1243/PIME_PROC_1983_197_076_0210.1243/PIME_PROC_1983_197_076_02 ↗
27. Basu B. Biomaterials Science and Tissue Engineering: Principles and Methods . Cambridge University Press, Cambridge 2017.
28. Basu B, and Sourabh G. Biomaterials for Musculoskeletal Regeneration: Applications . Springer, Singapore, 2016.
29. Basu, B. Biomaterials for Musculoskeletal Regeneration: Concepts . Springer, Singapore, 2016.