journal article·2024-12-16Open access

Design and characterization of 3D-printed TPU-based lattice structures. Application to methodology for the design of personalized therapeutic products

Sergio de la Rosa, Pedro F. Mayuet, Cátia S. Silva, Álvaro M. Sampaio, Lucía Rodríguez-Parada

Rapid Prototyping Journal· Volume 30· Issue 11

Abstract

Purpose This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products. Design/methodology/approach Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness. Findings A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements. Originality/value This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Cadiz Department of Mechanical Engineering and Industrial Design, Faculty Engineering, , Cádiz,

, University of Minho – Campus of Azurém IPC – Institute for Polymers and Composites , Guimarães, and DONE Lab – Advanced Manufacturing of Products and Tools , Guimarães,

, University of Minho – Campus of Azurém DONE Lab – Advanced Manufacturing of Products and Tools , Guimarães, ; IPC – Institute for Polymers and Composites , Guimarães, and School of Architecture Art and Design, , Guimarães,

University of Minho DONE Lab – Advanced Manufacturing of Products and Tools , Guimarães, ; IPC – Institute for Polymers and Composites , Guimarães, and School of Architecture Art and Design, , Guimarães,

References (76)

Show source-provided references
1. Additive manufacturing: challenges, trends, and applications10.1177/1687814018822880 ↗
2. Influence of 3D printing process parameters on the mechanical properties and mass of PLA parts and predictive models10.1108/RPJ-03-2020-0043/FULL/PDF ↗
3. Optimizing the specific mechanical properties of lattice structures fabricated by material extrusion additive manufacturing10.1016/J.JMRT.2022.12.024 ↗
4. Development and biomechanical validation of medical insoles to prevent foot ulcers on diabetic patients by means of thermoplastic elastomers and additive manufacturing technologies10.1109/TIPTEKNO.2019.8895086 ↗
5. Advances in orthotic and prosthetic manufacturing: a technology review10.3390/ma13020295 ↗
6. 3D printed polyurethane honeycombs for repeated tailored energy absorption10.1016/j.matdes.2016.08.062 ↗
7. Compressive behaviour of 3D printed thermoplastic polyurethane honeycombs with graded densities10.1016/j.matdes.2018.11.019 ↗
8. Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram10.1016/S0734-743X(00)00060-9 ↗
9. A randomized clinical trial on preventing pressure ulcers with wheelchair seat cushions10.1111/J.1532-5415.2010.03168.X ↗
10. Modelling and FE simulation of 3D printed Co-Cr lattice structures for biomedical applications10.1016/J.PROCIR.2022.06.066 ↗
11. Effects of coating on the fatigue endurance of FDM lattice structures10.1016/J.PROSTR.2022.12.101 ↗
12. Product development and its comparative analysis by SLA, SLS and FDM rapid prototyping processes10.1088/1757-899X/149/1/012009 ↗
13. Experimental and numerical investigation of compressive behavior of lattice structures manufactured through projection micro stereolithography10.1016/J.MTCOMM.2020.101563 ↗
14. 3D printing of functional anatomical insoles10.1016/J.COMPIND.2017.12.001 ↗
15. de Carvalho Filho · 2020 · 32810.1007/978-3-030-20216-3_31/COVER ↗
16. de la Rosa · 2023 · 91410.1007/978-3-031-15928-2_80/COVER ↗
17. Design of customized TPU lattice structures for additive manufacturing: influence on the functional properties in elastic products10.3390/POLYM13244341 ↗
18. Quasi-static and dynamic compressive properties and deformation mechanisms of 3D printed polymeric cellular structures with kelvin cells10.1016/J.IJIMPENG.2019.05.017 ↗
19. Topology optimization for multiscale design of porous composites with multi-domain microstructures10.1016/j.cma.2018.10.017 ↗
20. Integration of additive manufacturing, parametric design, and optimization of parts obtained by fused deposition modeling (FDM). A methodological approach10.3390/POLYM12091993 ↗
21. Optimization methodology for additive manufacturing of customized parts by fused deposition modeling FDM. Application to a shoe heel10.3390/POLYM12092119 ↗
22. Future of additive manufacturing in healthcare10.1016/j.cobme.2020.100255 ↗
23. Polymers for additive manufacturing and 4D-printing: materials, methodologies, and biomedical applications10.1016/j.progpolymsci.2019.03.001 ↗
24. Energy absorption enhancement of additively manufactured hexagonal and re-entrant (auxetic) lattice structures by using multi-material reinforcements10.1016/J.ADDMA.2022.103076 ↗
25. Fabrication of polymeric lattice structures for optimum energy absorption using multi jet fusion technology10.1016/j.matdes.2018.05.059 ↗
26. Design and evaluation of 3D printed polymeric cellular materials for dynamic energy absorption10.1007/s00170-019-03541-4 ↗
27. Design and prototyping by additive manufacturing of a functional splint for rehabilitation of achilles tendon intrasubstance rupture10.1145/3284179.3284253 ↗
28. Additive manufacturing with soft TPU – adhesion strength in multimaterial flexible joints10.3389/fmech.2019.00037 ↗
29. Polymer design for 3D printing elastomers: recent advances in structure, properties, and printing10.1016/J.PROGPOLYMSCI.2019.101144 ↗
30. ISO (2003), “ISO 604:2003 plastics – determination of compressive properties”, available at:www.iso.org/standard/31261.html (accessed12 November 2023).
31. Design optimization of PLA lattice in 3D printing10.1016/J.MATPR.2022.02.186 ↗
32. Additive manufacturing technologies: an overview about 3D printing methods and future prospects10.1155/2019/9656938 ↗
33. 3D/4D printing of polymers: fused deposition modelling (FDM), selective laser sintering (SLS), and stereolithography (SLA)10.3390/POLYM13183101 ↗
34. Influence of post-processing CO2 laser cutting and FFF 3D printing parameters on the surface morphology of PLAs: statistical modelling and RSM optimisation10.1016/J.IJLMM.2023.01.004 ↗
35. On the directional elastic modulus of the TPMS structures and a novel hybridization method to control anisotropy10.1016/J.MATDES.2021.110074 ↗
36. Adopting additive manufacturing as a cleaner fabrication framework for topologically optimized orthotic devices: implications over sustainable rehabilitation10.1016/J.CLET.2022.100559 ↗
37. Supportless lattice structures for energy absorption fabricated by fused deposition modeling10.1089/3dp.2019.0089 ↗
38. Evaluation of the mechanical properties of porous thermoplastic polyurethane obtained by 3D printing for protective gear10.1155/2019/5838361 ↗
39. Effects of different seat cushions on interface pressure distribution: a pilot study10.1589/JPTS.28.227 ↗
40. Effects of training with elastic resistance versus conventional resistance on muscular strength: a systematic review and meta-analysis10.1177/2050312119831116 ↗
41. A critical review of additive manufacturing technology in rehabilitation medicine via the use of visual knowledge graph10.1080/17452759.2022.2132265 ↗
42. Design and 3D printing of adjustable modulus porous structures for customized diabetic foot insoles10.1016/j.ijlmm.2018.10.003 ↗
43. Elastic and plastic characterization of a new developed additively manufactured functionally graded porous lattice structure: analytical and numerical models10.1016/J.IJMECSCI.2019.02.041 ↗
44. Mechanical evaluation of elastic tubes used in physical therapy10.3109/09593985.2013.845806 ↗
45. An investigation into reinforced and functionally graded lattice structures10.1177/0021955X16639035 ↗
46. Systematic design of high-strength multicomponent metamaterials10.1016/j.matdes.2019.108124 ↗
47. Statistical and experimental analysis of process parameters of 3D nylon printed parts by fused deposition modeling: response surface modeling and optimization10.1007/s11665-021-05848-4 ↗
48. Multi-material additive manufacturing: a systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials10.1016/J.MATDES.2023.111661 ↗
49. Graded lattice structures: simultaneous enhancement in stiffness and energy absorption10.1016/j.matdes.2020.109129 ↗
50. Aesthetics in orthopedic products: applications of the advanced manufacture (AM) to the industrial design of orthoses10.1145/3362789.3362826 ↗
51. Damage-tolerant architected materials inspired by crystal microstructure10.1038/s41586-018-0850-3 ↗
52. FDM process parameters influence over the mechanical properties of polymer specimens: a review10.1016/J.POLYMERTESTING.2018.05.020 ↗
53. Supportless lattice structure for additive manufacturing of functional products and the evaluation of its mechanical property at variable strain rates10.3390/MA15227954 ↗
54. Multi-material additive manufacturing with lightweight closed-cell foam-filled lattice structures for enhanced mechanical and functional properties10.1016/J.ADDMA.2022.102766 ↗
55. Development of pure poly vinyl chloride (PVC) with excellent 3D printability and macro- and micro-structural properties10.1002/MAME.202200568 ↗
56. Shape memory performance assessment of FDM 3D printed PLA-TPU composites by box-behnken response surface methodology10.1007/S00170-023-11571-2/TABLES/8 ↗
57. Influence of 3D-Printed TPU properties for the design of elastic products10.3390/POLYM13152519 ↗
58. Design of customized TPU lattice structures for additive manufacturing: influence on the functional properties in elastic products10.3390/POLYM13244341 ↗
59. An overview of the additive manufacturing capabilities in the development of rehabilitation products with customized elastic properties10.1088/1757-899X/1193/1/012122 ↗
60. Design and development of a customised knee positioning orthosis using low cost 3D printers10.1080/17452759.2017.1350552 ↗
61. Design and strengthening mechanisms in hierarchical architected materials processed using additive manufacturing10.1016/J.IJMECSCI.2018.09.038 ↗
62. Utilization of rapid prototyping technology for the fabrication of an orthopedic shoe inserts for foot pain reprieve using thermo-softening viscoelastic polymers: a novel experimental approach10.1177/0020294019887194/ASSET/IMAGES/LARGE/10.1177_0020294019887194-FIG11.JPEG ↗
63. Revolutionary development in orthopedic insole by additive manufacturing
64. Experimental and numerical study and multi-objective optimisation of quasi-static compressive test on three-dimensional printed lattice-core sandwich structures10.1080/13588265.2020.1775053 ↗
65. Data-driven design of customized porous lattice sole fabricated by additive manufacturing10.1016/J.PROMFG.2021.06.035 ↗
66. Functional gradient structural design of customized diabetic insoles10.1016/J.JMBBM.2019.03.003 ↗
67. Texis (2024), “Texis - connected pressure mapping textile for healthcare applications”, available at:www.texisense.com/ (accessed13 November 2023).
68. Energy absorption of muscle-inspired hierarchical structure: experimental investigation10.1016/j.compstruct.2019.111250 ↗
69. Concurrent design of hierarchical structures with three-dimensional parameterized lattice microstructures for additive manufacturing10.1007/s00158-019-02408-2 ↗
70. Mapping porous microstructures to yield desired mechanical properties for application in 3D printed bone scaffolds and orthopaedic implants10.1016/J.MATDES.2017.07.021 ↗
71. A review of the application of additive manufacturing in prosthetic and orthotic clinics from a biomechanical perspective10.1016/j.eng.2020.07.019 ↗
72. Compression and deformation behaviors of hierarchical circular-cell lattice structure with enhanced mechanical properties and energy absorption capacity10.3390/aerospace9120786 ↗
73. Wheelchair (2024), “Wheelchair cushion vicair vector O2”, available at:www.vicair.com/product/wheelchair-cushion-vicair-vector-o2-10cm/ (accessed12 November 2023).
74. The manufacture of 3D printing of medical grade TPU10.1007/S40964-017-0023-1 ↗
75. Lightweight splint design for individualized treatment of distal radius fracture10.1007/s10916-019-1404-4 ↗
76. An integrative review on the applications of 3D printing in the field of in vitro diagnostics10.1016/J.CCLET.2021.08.105 ↗