The electrocaloric effect of lead-free Ba1−yCayTi1−xHfxO3 from direct and indirect measurements
Source abstract
Abstract
We report on the dielectric and electrocaloric properties of Ba1−yCayTi1−xHfxO3 for compositions 0.12 < x < 0.18 and y = 0.06, as well as x = 0.15 and 0 < y < 0.15, synthesized by the conventional solid-state reaction method. The addition of Hf/Ca broadens the ferroelectric-paraelectric phase transition while moving it toward room temperature. Two interferroelectric transitions are seen to converge, together with the ferroelectric–paraelectric phase transition, at ∼335 K for 0.12 < xc < 0.135 and y = 0.06. Consistent with the dielectric properties, the electrocaloric effect maximizes closer to room temperature with increasing Hf/Ca substitutions, which promote larger temperature spans. The electrocaloric responsivity gradually decreases from 0.2 to 0.1 K mm kV−1 with the addition of Hf/Ca. A homemade quasi-adiabatic calorimeter is employed to measure “directly” the electrocaloric data, which are also calculated from polarization-versus-electric-field cycles using “indirect” standard procedures. The comparison between measured and calculated values highlights the importance of having access to direct methods for a reliable determination of the electrocaloric effect.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza 1 , 50009 Zaragoza, Spain
Departamento de Física de la Materia Condensada, CSIC-Universidad de Zaragoza 2 , 50009 Zaragoza, Spain
Funding
Ministerio de Ciencia e Innovación · Gobierno de Aragón · Horizon 2020 Framework Program
References (35)
Show source-provided references
1. Correia · 201410.1007/978-3-642-40264-7 ↗
2. Giant electrocaloric effect in thin-film PbZr0.95Ti0.05O310.1126/science.1123811 ↗
3. Caloric materials near ferroic phase transitions10.1038/nmat3951 ↗
4. Electrocaloric properties of (1 − x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 ferroelectric ceramics near room temperature10.1016/s0254-0584(98)00204-1 ↗
5. Caloric effects in perovskite oxides10.1002/admi.201900291 ↗
6. Lines · 1977
7. Giant electrocaloric strength in single-crystal BaTiO310.1002/adma.201203823 ↗
8. The electrocaloric effect around the orthorhombic-tetragonal first-order phase transition in BaTiO310.1063/1.4732146 ↗
9. Electrocaloric effect in BaTiO3 at all three ferroelectric transitions: Anisotropy and inverse caloric effects10.1103/PhysRevB.96.0141020 ↗
10. BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives10.1063/1.4990046 ↗
11. Composition-driven phase boundary and electrical properties in (Ba0.94Ca0.06)(Ti1−xMx)O3 (M = Sn, Hf, Zr) lead-free ceramics10.1039/c5dt04891e ↗
12. Lead-free relaxor ferroelectrics10.1111/j.1551-2916.2011.04952.x ↗
13. Strong electrocaloric effect in lead-free 0.65Ba(Zr0.2Ti0.8)O3–0.35(Ba0.7Ca0.3)TiO3 ceramics obtained by direct measurements10.1063/1.4907774 ↗
14. Large electrocaloric effect in ferroelectric polymers near room temperature10.1126/science.1159655 ↗
15. Giant electrocaloric response over a broad temperature range in modified BaTiO3 ceramics10.1002/adfm.201302386 ↗
16. Large room-temperature electrocaloric effect in lead-free BaHfxTi1−xO3 ceramics under low electric field10.1016/j.actamat.2016.05.044 ↗
17. Direct measurement of electrocaloric effect in lead-free Ba(SnxTi1−x)O3 ceramics10.1063/1.5001196 ↗
18. Site engineering and polarization characteristics in (Ba1−yCay)(Ti1−xHfx)O310.1063/1.4939762 ↗
19. Electrocaloric effect in Ba(Zr, Ti)O3–(Ba, Ca)TiO3 ceramics measured directly10.1111/jace.14456 ↗
20. Electro-caloric effect in 0.45BaZr0.2Ti0.8O3−0.55Ba0.7Ca0.3TiO3 single crystal10.1063/1.4793213 ↗
21. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-i ↗
22. Direct and indirect measurements on electrocaloric effect: Recent developments and perspectives10.1063/1.4958327 ↗
23. Modified differential scanning calorimeter for direct electrocaloric measurements10.1109/tuffc.2016.2592542 ↗
24. Quasi-adiabatic calorimeter for direct electrocaloric measurements10.1063/1.4997155 ↗
25. Electrocaloric effect in single-crystal triglycine sulfate
26. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/s0567739476001551 ↗
27. The dielectric relaxation in solid solutions BaTi1−xZrxO310.1080/00150190902850822 ↗
28. Study of the relaxor behavior in BaTi1−xHfxO3 (0.20 ≤ x ≤ 0.30) ceramics10.1016/j.solidstatesciences.2007.07.023 ↗
29. Non-Debye dielectric dispersion of barium titanate stannate in the relaxor and diffuse phase-transition state10.1063/1.1649820 ↗
30. Critical exponents of the dielectric constants in diffused-phase-transition crystals10.1080/00150198208260644 ↗
31. Relaxation polarization of PbM1/3Nb2/3O3(PMN)-A ferroelectric with a diffused phase transition10.1080/00150197308235773 ↗
32. Variation of curie temperature with electric field in ferroelectric crystals. II10.1016/0031-8914(69)90282-1 ↗
33. Non-ergodic–ergodic transition and corresponding electrocaloric effect in lead-free bismuth sodium titanate-based relaxor ferroelectrics10.1016/j.jeurceramsoc.2022.05.024 ↗
34. Direct and indirect determination of electrocaloric effect in Na0.5Bi0.5TiO310.1063/1.4985067 ↗
35. Why is the electrocaloric effect so small in ferroelectrics?10.1063/1.4950788 ↗