Solid-source metal–organic molecular beam epitaxy of epitaxial RuO2
Source abstract
Abstract
A seemingly simple oxide with a rutile structure, RuO2, has been shown to possess several intriguing properties ranging from strain-stabilized superconductivity to a strong catalytic activity. Much interest has arisen surrounding the controlled synthesis of RuO2 films, but unfortunately, utilizing atomically controlled deposition techniques, such as molecular beam epitaxy (MBE), has been difficult due to the ultra-low vapor pressure and low oxidation potential of Ru. Here, we demonstrate the growth of epitaxial, single crystalline RuO2 films on different substrate orientations using the novel solid-source metal–organic (MO) MBE. This approach circumvents these issues by supplying Ru using a “pre-oxidized” solid MO precursor containing Ru. High-quality epitaxial RuO2 films with a bulk-like room-temperature resistivity of 55 μΩ cm were obtained at a substrate temperature as low as 300 °C. By combining x-ray diffraction, transmission electron microscopy, and electrical measurements, we discuss the effect of substrate temperature, orientation, film thickness, and strain on the structure and electrical properties of these films. Our results illustrating the use of a novel solid-source metal–organic MBE approach pave the way to the atomic-layer controlled synthesis of complex oxides of “stubborn” metals, which are not only difficult to evaporate but also hard to oxidize.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Semiconductor materials and devices · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering and Materials Science, University of Minnesota , Minneapolis, Minnesota 55455, USA
Funding
U.S. Department of Energy · Air Force Office of Scientific Research · Division of Materials Research · National Science Foundation
References (34)
Show source-provided references
1. Magnetoresistance of RuO2-based resistance thermometers below 0.3 K10.1016/s0011-2275(01)00066-2 ↗
2. Reactively sputtered RuO2 thin film resistor with near zero temperature coefficient of resistance10.1016/0040-6090(91)90171-s ↗
3. Bulk and surface plasmon polariton excitation in RuO2 for low-loss plasmonic applications in NIR10.1364/oe.20.008618 ↗
4. Electrode materials for aqueous asymmetric supercapacitors10.1039/c3ra23466e ↗
5. Design and tailoring of the nanotubular arrayed architecture of hydrous RuO2 for next generation supercapacitors10.1021/nl061576a ↗
6. Electrolysis of water on oxide surfaces10.1016/j.jelechem.2006.11.008 ↗
7. Orientation-dependent oxygen evolution activities of rutile IrO2 and RuO210.1021/jz500610u ↗
8. Designing low thermal conductivity of RuO2 for thermoelectric applications10.1063/1.4909513 ↗
9. Multifold Seebeck increase in RuO2 films by quantum-guided lanthanide dilute alloying10.1063/1.4864078 ↗
10. Strain-stabilized superconductivity10.1038/s41467-020-20252-7 ↗
11. Superconductivity in uniquely strained RuO2 films10.1103/physrevlett.125.147001 ↗
12. Itinerant antiferromagnetism in RuO210.1103/PhysRevLett.118.077201 ↗
13. Chemical vapor deposition of ruthenium and ruthenium dioxide films10.1149/1.2113647 ↗
14. Preparation and properties of Ru and RuO2 thin film electrodes for ferroelectric thin films10.1143/jjap.33.5223 ↗
15. Fatigue of ferroelectric PbZrxTiyO3 capacitors with Ru and RuOx electrodes10.1557/jmr.1993.0012 ↗
16. Characterization of reactively sputtered ruthenium dioxide for very large scale integrated metallization10.1063/1.97673 ↗
17. Reactive sputtering of RuO2 films10.1016/0040-6090(89)90137-5 ↗
18. Structure and surface morphology of highly conductive RuO2 films grown on MgO by oxygen-plasma-assisted molecular beam epitaxy10.1557/jmr.1997.0253 ↗
19. Chlorine evolution reaction electrocatalysis on RuO2(110) and IrO2(110) grown using molecular-beam epitaxy10.1063/1.5051429 ↗
20. Core-level X-ray photoelectron spectra and X-ray photoelectron diffraction of RuO2(110) grown by molecular beam epitaxy on TiO2(110)10.1016/s0169-4332(97)00233-x ↗
21. Reactive-sputter deposition and structure of RuO2 films on sapphire and strontium titanate10.1116/1.580382 ↗
22. Epitaxial growth of ruthenium dioxide films by chemical vapor deposition and its comparison with similarly grown chromium dioxide films10.1016/j.tsf.2004.10.032 ↗
23. Heteroepitaxial growth of highly conductive metal oxide RuO2 thin films by pulsed laser deposition10.1063/1.115054 ↗
24. Epitaxial growth of highly conductive RuO2 thin films on (100) Si10.1063/1.115715 ↗
25. Novel synthesis approach for ‘stubborn’ metals and metal oxides10.1073/pnas.2105713118 ↗
26. 2020
27. Growth of high-quality SrTiO3 films using a hybrid molecular beam epitaxy approach10.1116/1.3106610 ↗
28. Hybrid molecular beam epitaxy for the growth of stoichiometric BaSnO310.1116/1.4933401 ↗
29. Growth modes in metal-organic molecular beam epitaxy of TiO2 on r-plane sapphire10.1116/1.3065713 ↗
30. Bestimmung der inneren struktur und der größe von kolloidteilchen mittels röntgenstrahlen10.1007/978-3-662-33915-2_7 ↗
31. Does chemistry really matter in the chemical vapor deposition of titanium dioxide? Precursor and kinetic effects on the microstructure of polycrystalline films10.1021/ja984446f ↗
32. Molecular beam epitaxy growth of SnO2 using a tin chemical precursor10.1116/1.4913294 ↗
33. Precursor selection in hybrid molecular beam epitaxy of alkaline-earth stannates10.1116/6.0000590 ↗
34. Electrical transport properties of IrO2 and RuO210.1103/physrevb.1.1494 ↗