On acquiring data for large-scale crack bridging at high strain rates
Source abstract
Abstract
Numerical simulations are used to design test geometries and loading histories that are suitable for probing the large-scale bridging effects of through-thickness reinforcement that is shearing at high strain rates. The bridging effects are represented by a cohesive law and tests are sought that will determine any rate dependence in its parameters. The end-notched flexure test is studied, because it allows easy application of time-dependent loading and has proven to be an information-rich test in the quasi-static case. However, dynamic conditions greatly complicate fracture behavior, with possible regimes of hammering and multiple cracking, which should be avoided when maximum information is sought. Information content is addressed by focusing on regimes within the full computed solution space where crack growth is approximately steady state and the information content of experiments can be most easily assessed. Numerical results show that the hypothetical rate dependence in the cohesive law causes strong and measurable changes in the regime of steady-state behavior, if the tests are properly selected to vary the crack sliding speed. The estimates of information content are conservative, because the information available from all possible tests of specimens designed by analysis of the steady-state regime will necessarily exceed the information deduced by analyzing the steady-state regime alone.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Technical University of Denmark, Lyngby, Denmark
DICAT, University of Genova, Genova, Italy
Teledyne Scientific Co LLC, Thousand Oaks, CA, USA
References (47)
Show source-provided references
1. 10.1016/1359-835X(96)00084-X10.1016/1359-835X(96)00084-X ↗
2. Glaessgen EH · AIAA J Paper 1247 · 1999
3. Holt DJ · Automot Eng · 1982 · 90
4. 10.1115/1.290329810.1115/1.2903298 ↗
5. 10.1016/S1359-835X(99)00056-110.1016/S1359-835X(99)00056-1 ↗
6. Rhodes MD, Williams, JG. Concepts for improving damage tolerance of composite compression panels. In: 5th DoD/NASA Conference on Fibrous Composites in Structural Design , New Orleans, USA, January 1981.
7. 10.2514/3.916010.2514/3.9160 ↗
8. 10.4028/www.scientific.net/KEM.37.30510.4028/www.scientific.net/KEM.37.305 ↗
9. Turrettini A. An investigation of the mode I and mode II stitch bridging laws in stitched polymer composites. Masters Thesis, Department of Mechanical and Environmental Engineering, University of California, Santa Barbara, USA, 1996.
10. 10.1023/A:100752032420710.1023/A:1007520324207 ↗
11. 10.1016/j.compositesa.2004.03.00610.1016/j.compositesa.2004.03.006 ↗
12. 10.1016/j.compositesa.2005.11.01310.1016/j.compositesa.2005.11.013 ↗
13. 10.1080/1537649049049389910.1080/15376490490493899 ↗
14. 10.1016/0266-3538(94)90019-110.1016/0266-3538(94)90019-1 ↗
15. 10.1016/S0266-3538(97)00229-710.1016/S0266-3538(97)00229-7 ↗
16. 10.1016/0266-3538(95)00089-510.1016/0266-3538(95)00089-5 ↗
17. 10.1016/S0266-3538(97)00186-310.1016/S0266-3538(97)00186-3 ↗
18. 10.1016/S1359-835X(98)00087-610.1016/S1359-835X(98)00087-6 ↗
19. 10.1016/j.compscitech.2003.07.00410.1016/j.compscitech.2003.07.004 ↗
20. 10.4028/www.scientific.net/KEM.137.19510.4028/www.scientific.net/KEM.137.195 ↗
21. 10.1016/S0266-3538(97)00122-X10.1016/S0266-3538(97)00122-X ↗
22. 10.1177/002199830808859410.1177/0021998308088594 ↗
23. 10.1080/1537649029009697310.1080/15376490290096973 ↗
24. 10.1016/j.ijsolstr.2008.11.02710.1016/j.ijsolstr.2008.11.027 ↗
25. 10.1016/S0263-8223(03)00035-710.1016/S0263-8223(03)00035-7 ↗
26. 10.1016/j.compscitech.2006.10.00110.1016/j.compscitech.2006.10.001 ↗
27. 10.1016/S1359-6454(01)00241-510.1016/S1359-6454(01)00241-5 ↗
28. 10.1016/S0022-5096(03)00035-810.1016/S0022-5096(03)00035-8 ↗
29. 10.1016/j.ijsolstr.2008.08.01910.1016/j.ijsolstr.2008.08.019 ↗
30. 10.1007/s10704-009-9410-z10.1007/s10704-009-9410-z ↗
31. 10.1016/S0266-3538(00)00197-410.1016/S0266-3538(00)00197-4 ↗
32. 10.1016/S0266-3538(98)00025-610.1016/S0266-3538(98)00025-6 ↗
33. Aliyu AA, Daniel IM. Effect of strain rate on delamination fracture toughness of graphite/epoxy. In: Johnson WS (ed.), Delamination and debonding of materials , ASTM STP 876. Philadelphia, USA: ASTM, 1985, pp. 336–348.10.1520/STP36313S ↗
34. Yaniv G, Daniel IM. Height-tapered double cantilever beam specimen for study of rate effects on fracture toughness of composites. In: Whitecomb JD (ed.), Composite materials: testing and design , ASTM STP 972. Philadelphia, USA: ASTM, 1990, pp. 241–258.10.1520/STP26139S ↗
35. 10.1023/A:102288441096810.1023/A:1022884410968 ↗
36. 10.1016/0022-5096(92)90198-B10.1016/0022-5096(92)90198-B ↗
37. 10.1016/S0022-5096(98)00107-010.1016/S0022-5096(98)00107-0 ↗
38. 10.1007/s10704-006-6358-010.1007/s10704-006-6358-0 ↗
39. 10.1016/0020-7225(89)90118-310.1016/0020-7225(89)90118-3 ↗
40. 10.1115/1.311976410.1115/1.3119764 ↗
41. Freund LB · 1989
42. 10.1016/S0266-3538(02)00093-310.1016/S0266-3538(02)00093-3 ↗
43. 10.1007/BF0242825210.1007/BF02428252 ↗
44. 10.1016/S1359-8368(02)00039-210.1016/S1359-8368(02)00039-2 ↗
45. 10.1016/S0020-7683(97)00055-310.1016/S0020-7683(97)00055-3 ↗
46. 10.1177/002199830303450510.1177/0021998303034505 ↗
47. Carpinteri A, and Massabò R. Reversal in the failure scaling transition of brittle matrix fibrous composites, Journal of Engineering Mechanics (ASCE) 1997; 123(2): 107–114.10.1061/(ASCE)0733-9399(1997)123:2(107) ↗