Parametric Optmisation of Pin-assisted-melt Impregnation of Glass Fiber/Polypropylene by Taguchi Method
Source abstract
Abstract
A continuous glass fiber (GF) roving reinforced polypropylene (PP) tape is prepared with a pin-assisted-melt impregnation set-up. This study originally applied the Taguchi method to statistically assess the effect of selected impregnation parameters on the impregnation process, and to optimize the parameters to realize a high quality impregnated tape. The quality of the impregnated tape is characterized by the degree of impregnation, ratio of the impregnated fiber number to the total fiber number. According to the Taguchi method, impregnation experiments are designed and the experimental results are analyzed. An optimal parameter combination is determined, which led to a degree of impregnation more than 94%. Analysis of variance (ANOVA) was performed on the measured data and S/N (signal to noise) ratios. The results indicated that pulling speed, melt temperature, and the number of impregnation pins are the significant factors in a declining sequence affecting the impregnation process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Functional Polymer, School of Materials Science & Engineering Tongji University, Siping Road 1239, Shanghai 200092, China;
Institute of Functional Polymer, School of Materials Science & Engineering Tongji University, Siping Road 1239, Shanghai 200092, China
National Key Laboratory of Advanced Composites Beijing Institute of Aeronautical Materials, Beijing 100095, China
School of Materials and Chemical Engineering, Zhejiang University Hangzhou 310027, China
References (15)
Show source-provided references
1. Hou, M. · Rubber Compos. Process Applic · 1995 · 23 · 279
2. 10.1007/978-94-011-4421-6_4310.1007/978-94-011-4421-6_43 ↗
3. 10.1177/08927057990120040310.1177/089270579901200403 ↗
4. 10.1016/S1359-835X(97)00109-710.1016/S1359-835X(97)00109-7 ↗
5. Bijsterbosch, H. · Composites Manufacturing · 1993 · 16 · 363
6. 10.1177/089270570403540610.1177/0892705704035406 ↗
7. Henniger, F. · Composites-Part A: Applied Science and Manufacturing · 2002 · 33 · 167710.1016/S1359-835X(02)00186-0 ↗
8. 10.1016/0263-8223(94)90076-010.1016/0263-8223(94)90076-0 ↗
9. 10.1016/S0266-3538(03)00107-610.1016/S0266-3538(03)00107-6 ↗
10. 10.1016/0032-3861(96)00282-010.1016/0032-3861(96)00282-0 ↗
11. Lutz, A. · 471
12. Phillip, J.R. · 1996
13. 10.1002/(SICI)1098-2329(199922)18:2<125::AID-ADV3>3.0.CO;2-A10.1002/(SICI)1098-2329(199922)18:2<125::AID-ADV3>3.0.CO;2-A ↗
14. 10.1002/qre.60210.1002/qre.602 ↗
15. 10.1002/pc.1016910.1002/pc.10169 ↗