Effects of thermal gradients on defect formation during the consolidation of partially impregnated prepregs
Source abstract
Abstract
We describe the effects of thermal gradients on the consolidation of partially impregnated prepregs. Laminates were cured on a heated tool in isothermal and nonisothermal conditions. Key process parameters were varied, including thermal gradient magnitude, air evacuation direction, and vacuum quality. Laminate quality was assessed using microscopy of polished cross-sections and X-ray computed tomography, and interpreted relative to the evolution of resin and prepreg properties during cure. The results show that thermal gradients influenced the rate of impregnation of the prepreg and the rate of gas transport, and affected the amount and distribution of porosity when air was not fully evacuated. Temperature distributions that led to cold regions at the ply boundaries were advantageous, typically exhibiting lower porosity than isothermal baselines. Conversely, gradients resulting in hotter-than-average part perimeters effectively sealed air within the laminate, degrading quality. The results clarify fundamental defect formation mechanisms for partially impregnated prepregs and other processes reliant on air evacuation through an unsaturated preform and provide guidelines for part, tool, and process design.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Injection Molding Process and Properties · Epoxy Resin Curing Processes · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aerospace and Mechanical Engineering, University of Southern California, Los Angeles, USA
Department of Chemical Eng. and Materials Science, University of Southern California, Los Angeles, USA
Funding
Division of Civil, Mechanical and Manufacturing Innovation
References (44)
Show source-provided references
1. Campbell FC. Manufacturing technology for aerospace structural materials . London: Elsevier, 2006.10.1016/B978-185617495-4/50011-1 ↗
2. 10.1016/j.jclepro.2012.02.02810.1016/j.jclepro.2012.02.028 ↗
3. 10.1016/S1359-835X(01)00015-X10.1016/S1359-835X(01)00015-X ↗
4. 10.1016/j.compositesa.2014.09.02910.1016/j.compositesa.2014.09.029 ↗
5. 10.1177/00219983910250030210.1177/002199839102500302 ↗
6. 10.1177/00219983920260050210.1177/002199839202600502 ↗
7. 10.1002/(SICI)1097-0207(19990110)44:1<1::AID-NME481>3.0.CO;2-K10.1002/(SICI)1097-0207(19990110)44:1<1::AID-NME481>3.0.CO;2-K ↗
8. 10.1002/fld.165019070410.1002/fld.1650190704 ↗
9. 10.1016/S1359-835X(97)00065-110.1016/S1359-835X(97)00065-1 ↗
10. 10.1002/nme.8510.1002/nme.85 ↗
11. 10.1016/j.compscitech.2009.02.00210.1016/j.compscitech.2009.02.002 ↗
12. 10.1016/S0266-3538(03)00161-110.1016/S0266-3538(03)00161-1 ↗
13. 10.1016/j.applthermaleng.2004.03.00510.1016/j.applthermaleng.2004.03.005 ↗
14. 10.1002/pc.75015020510.1002/pc.750150205 ↗
15. 10.1002/pen.1137810.1002/pen.11378 ↗
16. 10.1016/S0017-9310(01)00266-610.1016/S0017-9310(01)00266-6 ↗
17. 10.1016/j.finel.2011.02.00710.1016/j.finel.2011.02.007 ↗
18. Fahrang L and Fernlund G. Void evolution and gas transport during cure in out-of-autoclave prepreg laminates. In: Proceedings of the SAMPE 2011 conference . Long Beach, CA: Society for the Advancement of Materials and Process Engineering, 23–26 May 2011, pp.1–15.
19. Black S · High Perform Compos · 2011
20. 10.1177/002199831560294910.1177/0021998315602949 ↗
21. Arney M, Grove SM, Progoulakis I, et al. Integrally-heated tooling for the manufacture of fibre-reinforced composites. In: Proceedings of the composites processing 2004 conference , Bromsgrove, Composites Processing Association, 23 April 2004.
22. 10.1016/j.matdes.2014.07.01910.1016/j.matdes.2014.07.019 ↗
23. 10.1177/073168441562680410.1177/0731684415626804 ↗
24. O’Bradaigh C · SAMPE Journal · 2011 · 47 · 6
25. Smith AW, Hubert P, Goyette K, et al. Development of a heated tooling solution to improve process flexibility for out-of-autoclave prepregs. In: Proceedings of the 45th international SAMPE technical conference . Wichita, KS: Society for the Advancement of Materials and Process Engineering, 21–24 October 2013, pp.1–15.
26. Payette S, Smith AW, Goyette K, et al. Out-of-autoclave manufacturing: benchmarking of an integrally heated tool-plate. In: Proceedings of the composites and advanced materials expo (CAMx) . Orlando, FL: Society for the Advancement of Material and Process Engineering, 13–16 October 2014, pp.1–15.
27. Schuetze-Coburn A, Klimkzak S and Tsui V. Development of active tooling for composite manufacturing. In: Proceedings of the AIAA region VI student conference . Sacramento, CA: American Institute for Aeronautics and Astronautics, 1–2 March 2014.
28. 10.1016/j.compscitech.2014.05.02710.1016/j.compscitech.2014.05.027 ↗
29. 10.1177/002199831349410110.1177/0021998313494101 ↗
30. 10.1016/j.compositesa.2013.02.01310.1016/j.compositesa.2013.02.013 ↗
31. 10.1016/j.compositesa.2012.10.00110.1016/j.compositesa.2012.10.001 ↗
32. Centea T, Hughes SM, Payette S, et al. Scaling challenges encountered with out-of-autoclave prepregs. In: Proceedings of the 53rd AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference . Honolulu, HI: American Institute for Aeronautics and Astronautics, 23–26 April 2012, pp.1–15.10.2514/6.2012-1568 ↗
33. 10.1016/j.compositesa.2012.03.02810.1016/j.compositesa.2012.03.028 ↗
34. 10.1016/j.compositesa.2015.04.00910.1016/j.compositesa.2015.04.009 ↗
35. Hu W, Grunenfelder LK and Nutt SR. In-situ observation of void transport during vacuum bag-only cure. In: Proceedings of the SAMPE 2016 technical conference. Long Beach, CA: Society for the Advancement of Material and Process Engineering, 2016.
36. 10.1016/j.compositesa.2012.11.00210.1016/j.compositesa.2012.11.002 ↗
37. 10.1177/002199831559200510.1177/0021998315592005 ↗
38. 10.1016/j.compositesa.2015.03.02110.1016/j.compositesa.2015.03.021 ↗
39. 10.1016/j.compositesa.2015.08.03410.1016/j.compositesa.2015.08.034 ↗
40. 10.1016/j.compositesa.2016.10.02710.1016/j.compositesa.2016.10.027 ↗
41. 10.1016/j.compositesa.2014.05.01010.1016/j.compositesa.2014.05.010 ↗
42. 10.1016/j.compscitech.2010.12.00910.1016/j.compscitech.2010.12.009 ↗
43. Howard S. Evaluating consolidation dynamics – study of key consolidation parameters in a vacuum bag only (VBO) cure. In: Proceedings of the SAMPE 2016 technical conference. Long Beach, CA: Society for the Advancement of Material and Process Engineering, 23–26 May 2016, pp.1–12.
44. 10.1177/002199830504873910.1177/0021998305048739 ↗