journal article·2019-09

Optimum design of perforated symmetric laminates using evolutionary algorithm

A Khechai, PM Mohite

Journal of Composite Materials· Volume 53· Issue 23
Publisher page

Abstract

Here, analytical studies have been carried out to determine the optimal values of effective parameters on the stress concentration factor around a cutout using genetic algorithm. Optimum designs of single lamina as well as symmetric laminates with 4, 8 and 12 layers of graphite/epoxy and glass/epoxy plates containing a circular cutout with various sizes are presented. The work focuses on extending the analytical solution given by Greszczuk to determine the stress distribution in multilayered composite plates subjected to arbitrary in-plane loadings. This is achieved by introducing an arbitrary oriented uniaxial, biaxial and shear loading conditions into Greszczuk solution. In order to mimic as much as possible the real structural behavior, the finite-width correction factor given by Tan is used. Effective parameters on stress distribution around the circular cutout in composite plates considered as design variables include: load angle, fiber orientation, cutout size and stacking sequence of the laminate. The objective function in this study is the minimization of maximum stress concentration around the cutout which is calculated by the present analytical solution. The first ply failure load predicted using Tsai–Wu criterion is maximized for both single lamina and symmetric laminates. Also, the weight of the plates is minimized by increasing the hole size to width ratio. The results obtained by the present analytical solution compare favorably with those obtained using complex variable method. For laminated plate subjected to shear loading, the stress concentration factor decreased drastically by 48.79% compared to a single lamina. The failure load is also increased in most of the loading cases. The results also showed that the genetic algorithm code converges rapidly in most of the cases. The accuracy, quickness, low computational cost and the simplicity of the present solution encourage the designers to use it in practical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Structure Analysis and Optimization · Mechanical Behavior of Composites · Topology Optimization in Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Civil Engineering Laboratory, University of Biskra, Algeria

Department of Aerospace Engineering, Indian Institute of Technology Kanpur, India

References (41)

Show source-provided references
1. 10.1007/s00158-008-0253-410.1007/s00158-008-0253-4 ↗
2. 10.1007/s00158-005-0519-z10.1007/s00158-005-0519-z ↗
3. 10.1007/s00158-006-0020-310.1007/s00158-006-0020-3 ↗
4. Green AE and Zerna W. Theoretical elasticity . Oxford: Clarendon Press, 1954.
5. Greszczuk LB. Stress concentrations and failure criteria for orthotropic and anisotropic plates with circular openings. In: Swanson GD and Hancock JR (eds) Composite materials: testing and design (second conference) . ASTM International, 1972, pp.363–381.10.1520/STP27758S ↗
6. 10.1016/0045-7949(96)00009-010.1016/0045-7949(96)00009-0 ↗
7. Arslan HM · Kuwait J Sci Eng · 2007 · 34 · 1
8. Sharma DS · Eng Lett · 2012 · 20 · 1
9. 10.1016/j.ijmecsci.2014.04.01910.1016/j.ijmecsci.2014.04.019 ↗
10. 10.1016/S0263-8223(00)00070-210.1016/S0263-8223(00)00070-2 ↗
11. 10.1016/j.compstruct.2004.08.03210.1016/j.compstruct.2004.08.032 ↗
12. Muskhelishvili NI. Some basic problems of the mathematical theory of elasticity . Dordrecht: Springer Science and Business Media, 2013.
13. Lekhnitski SG. Theory of elasticity of an anisotropic elastic body . Holden Day, 1963.
14. 10.1016/j.compstruct.2005.09.01710.1016/j.compstruct.2005.09.017 ↗
15. 10.1016/j.ijmecsci.2009.10.01310.1016/j.ijmecsci.2009.10.013 ↗
16. 10.1016/j.compstruct.2017.11.06010.1016/j.compstruct.2017.11.060 ↗
17. 10.1115/1.402756210.1115/1.4027562 ↗
18. Wang S · Mech Based Des Struct Mach · 2016 · 1 · 1
19. Bouzgou AA · Appl Mech Behav Mater Eng Syst · 2017 · 399
20. Bouzgou AA · Rev Compos Matér Avan · 2015 · 25 · 385
21. 10.1016/j.compstruct.2015.08.07710.1016/j.compstruct.2015.08.077 ↗
22. 10.1016/j.compstruct.2014.05.01110.1016/j.compstruct.2014.05.011 ↗
23. 10.1016/S0263-8223(01)00185-410.1016/S0263-8223(01)00185-4 ↗
24. 10.1007/s00158-016-1481-710.1007/s00158-016-1481-7 ↗
25. 10.1177/002199831561254010.1177/0021998315612540 ↗
26. 10.1016/j.euromechsol.2017.06.00310.1016/j.euromechsol.2017.06.003 ↗
27. 10.1177/030932471771627010.1177/0309324717716270 ↗
28. 10.1016/j.compstruc.2015.02.02010.1016/j.compstruc.2015.02.020 ↗
29. Arslan HM · Arab J Sci Eng · 2009 · 34 · 301
30. 10.1177/00219983880220110510.1177/002199838802201105 ↗
31. Hahn HT and Tsai SW. Introduction to composite materials . USA: CRC Press, 1980.
32. Holland JH. Adaption in natural and artificial systems . Ann Arbor, MI: The University of Michigan Press, 1975.
33. 10.1016/j.compstruct.2017.10.04110.1016/j.compstruct.2017.10.041 ↗
34. 10.1109/4235.99601710.1109/4235.996017 ↗
35. Lekhnitskii SG. Anisotropic plates . [English translation by S.W. Tsai and T. Cheron]. Gordon and Breach, 1968.
36. 10.1007/s11465-014-0307-910.1007/s11465-014-0307-9 ↗
37. 10.1177/002199831557380210.1177/0021998315573802 ↗
38. 10.1177/002199831348881010.1177/0021998313488810 ↗
39. 10.1177/002199831665991510.1177/0021998316659915 ↗
40. Khechai A · J Inst Eng · 2017 · 99 · 1
41. Jafari M · Struct Multidisc Optim · 2017 · 57 · 1