journal article·2021-09

Effect of bolt tightening on the fatigue behavior of GLARE double shear lap joints

B Abazadeh, HR Maleki

Journal of Composite Materials· Volume 55· Issue 21
Publisher page

Abstract

In this paper, the effect of bolt torque tightening has been investigated on the fatigue behavior of GLARE in double shear lap configuration. To do so, experimental fatigue tests were conducted using GLARE3-5/4-0.4 specimens with applied torques of 0 (finger tightened), 2 and 4 Nm at different cyclic longitudinal load ranges to achieve the stress-life (S-N) curves. The results revealed that applying and increasing the clamping force enhances the fatigue life of the GLARE specimens. Furthermore, comparison of fatigue test results of GLARE and available monolithic aluminum alloy 2024-T3 plates indicated when the applied load range is low, the effect of clamping force is more noticeable in GLARE specimens due to longer fatigue crack growth life of GLARE. Also, the occurrence of fretting fatigue didn’t reduce the fatigue life of GLARE specimens considerably in contrary to aluminum sheets because of the laminated structure of GLARE. The obtained results can provide insights in designing bolted GLARE joints with superior fatigue in-service performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical stress and fatigue analysis · Mechanical Behavior of Composites · Engineering Structural Analysis Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechanical Engineering, University of Bonab, Iran

Funding

university of bonab

References (36)

Show source-provided references
1. Valtinant G, Hadrych I and Huhn H. Strengthening of riveted and bolted steel constructions under fatigue loading by preload fasteners: experimental and theoretical investigations. In: Fourth International Workshop on Connections in Steel Structures , Roanoke, USA, 2000, pp. 464-473.
2. 10.1111/j.1460-2695.2005.00938.x10.1111/j.1460-2695.2005.00938.x ↗
3. 10.1016/j.engfailanal.2010.09.01510.1016/j.engfailanal.2010.09.015 ↗
4. 10.1016/j.matdes.2012.08.05710.1016/j.matdes.2012.08.057 ↗
5. Chakherlou TN · Eng Fail Anal · 2009 · 16 · 2380
6. 10.1016/j.matdes.2011.04.02210.1016/j.matdes.2011.04.022 ↗
7. 10.1016/j.compositesa.2018.07.01810.1016/j.compositesa.2018.07.018 ↗
8. 10.1016/j.engfailanal.2019.07.05410.1016/j.engfailanal.2019.07.054 ↗
9. 10.1016/0013-7944(79)90098-510.1016/0013-7944(79)90098-5 ↗
10. Marissen R. · 1984
11. Hagenbeek M. Characterisation of Fibre Metal Laminates under Thermo-mechanical Loadings. PhD Thesis, Delft University of Technology, Delft, The Netherlands, 2005.
12. Vlot A, Gunnink JW. Fibre metal laminates, an introduction . Amsterdam: Springer, 2001.10.1007/978-94-010-0995-9 ↗
13. 10.1016/j.ijfatigue.2006.02.01510.1016/j.ijfatigue.2006.02.015 ↗
14. 10.1023/A:102553370180610.1023/A:1025533701806 ↗
15. 10.1016/j.engfracmech.2020.10727510.1016/j.engfracmech.2020.107275 ↗
16. 10.1016/S0013-7944(03)00063-810.1016/S0013-7944(03)00063-8 ↗
17. 10.1016/S0013-7944(99)00021-110.1016/S0013-7944(99)00021-1 ↗
18. 10.1016/j.engfracmech.2013.03.02010.1016/j.engfracmech.2013.03.020 ↗
19. 10.1016/j.ijfatigue.2006.07.00610.1016/j.ijfatigue.2006.07.006 ↗
20. Rodi R. The residual strength failure sequence in fibre metal laminates . PhD Thesis, Delft University of Technology, the Netherlands, 2012.
21. 10.1016/j.engfracmech.2010.03.04110.1016/j.engfracmech.2010.03.041 ↗
22. 10.1016/j.engfracmech.2013.03.00810.1016/j.engfracmech.2013.03.008 ↗
23. 10.1016/j.engfracmech.2015.06.06210.1016/j.engfracmech.2015.06.062 ↗
24. 10.1016/j.prostr.2016.06.41910.1016/j.prostr.2016.06.419 ↗
25. Müller RPG. An experimental and analytical investigation on the fatigue behaviour of fuselage riveted lap joints: the significance of the rivet squeeze force, and a comparison of 2024. T3 and glare 3 . PhD Thesis, TU Delft, the Netherlands, 1995.
26. Rans CD. 2-Bolted joints in glass reinforced aluminium (Glare) and other hybrid fibre metal laminates (FML). In: Camanho P and Tong L (eds) Composite joints and connections . Sawston: Woodhead Publishing, 2011, pp. 35–76.10.1533/9780857094926.1.35 ↗
27. 10.1016/j.compstruct.2017.09.04710.1016/j.compstruct.2017.09.047 ↗
28. 10.1016/j.engfailanal.2018.03.01210.1016/j.engfailanal.2018.03.012 ↗
29. 10.1007/s13726-018-00684-110.1007/s13726-018-00684-1 ↗
30. Heida JH, Platenkamp DJ. In-service inspection of Glare fuselage structures. National Aerospace Laboratory NLR-TP-2001-608 Report, Delft, the Netherland, 2001. https://core.ac.uk/download/pdf/53034617.pdf
31. 10.1016/S0924-0136(00)00416-710.1016/S0924-0136(00)00416-7 ↗
32. 10.1111/j.1460-2695.2005.00907.x10.1111/j.1460-2695.2005.00907.x ↗
33. 10.1590/S1516-1439200600030000210.1590/S1516-14392006000300002 ↗
34. Alderliesten R. Fatigue crack propagation and delamination growth in GLARE. PhD Thesis, TUDelft, the Netherlands, 2005.
35. 10.1007/s11837-005-0067-410.1007/s11837-005-0067-4 ↗
36. 10.1016/j.ijmecsci.2013.03.00110.1016/j.ijmecsci.2013.03.001 ↗