journal article·2022-03

Comparative study between mechanical and chemical treatments for the preparation of nanocellulose

Melina E Bracone, Leandro N Ludueña, Vera A Alvarez

Journal of Composite Materials· Volume 56· Issue 6
Publisher page

Abstract

Nanocrystalline cellulose (NCC) is usually obtained by the acid hydrolysis of microcrystalline cellulose for its use as polymer reinforcement. An ecological alternative to this process, avoiding the use of acids, is a mechanical method. High intensity ultrasonication (HIU) in optimal conditions (time, wave amplitude, volume ratio fiber/solution, cellulose extraction source) can be applied to prepare nanofibrillated cellulose (NFC). In this work, the HIU method was used to mechanically prepare NFC. Ultrasonication time (t) and wave amplitude (A) were optimized seeking for NFC with high crystallinity, strong thermal stability, large aspect ratio (length to diameter) and large surface to volume ratio with diameter in nanometer scale. The morphology and the physical/chemical properties of the NFC prepared at optimal HIU conditions were compared with those of NCC prepared from the same cellulose source at optimal acid hydrolysis (AH) conditions. Similar purity, lower crystallinity, improved thermal stability and larger aspect ratio with diameter in nanoscale were obtained for NFC prepared by HIU. These results can be used as an initial screening for the selection of the optimal process for NCC manufacture focusing on their use as polymer reinforcement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Grupo de Materiales Compuestos Termoplásticos (CoMP), Instituto de Investigaciones en Ciencia y Tecnología de Materiales (INTEMA), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Facultad de Ingeniería, Universidad Nacional de Mar del Plata, Argentina

Funding

Universidad Nacional de Mar del Plata · Agencia Nacional de Promoción Científica y Tecnológica

References (65)

Show source-provided references
1. 10.1007/s10570-016-1109-510.1007/s10570-016-1109-5 ↗
2. 10.1007/s10570-018-1686-610.1007/s10570-018-1686-6 ↗
3. 10.1007/s10570-014-0509-710.1007/s10570-014-0509-7 ↗
4. 10.1016/j.progpolymsci.2008.12.00210.1016/j.progpolymsci.2008.12.002 ↗
5. 10.1016/j.tibtech.2004.11.00210.1016/j.tibtech.2004.11.002 ↗
6. 10.1002/adfm.20180040910.1002/adfm.201800409 ↗
7. 10.1007/s12221-013-1118-z10.1007/s12221-013-1118-z ↗
8. 10.1007/s12221-015-0285-510.1007/s12221-015-0285-5 ↗
9. 10.15376/biores.6.2.1440-145310.15376/biores.6.2.1440-1453 ↗
10. 10.1016/j.jascer.2013.01.00210.1016/j.jascer.2013.01.002 ↗
11. 10.1021/acs.chemmater.7b0117010.1021/acs.chemmater.7b01170 ↗
12. 10.1016/j.msec.2013.10.00610.1016/j.msec.2013.10.006 ↗
13. 10.1002/adma.20160608310.1002/adma.201606083 ↗
14. 10.1007/s10570-015-0617-z10.1007/s10570-015-0617-z ↗
15. 10.1021/bm049368510.1021/bm0493685 ↗
16. 10.1007/s10853-009-3874-010.1007/s10853-009-3874-0 ↗
17. 10.1007/s10570-010-9405-y10.1007/s10570-010-9405-y ↗
18. 10.1007/s10570-017-1194-010.1007/s10570-017-1194-0 ↗
19. 10.1016/j.crcon.2018.05.00410.1016/j.crcon.2018.05.004 ↗
20. 10.1515/HF.2005.01610.1515/HF.2005.016 ↗
21. 10.1007/s00339-005-3316-z10.1007/s00339-005-3316-z ↗
22. 10.1016/j.jiec.2008.07.00810.1016/j.jiec.2008.07.008 ↗
23. 10.1021/bm061215p10.1021/bm061215p ↗
24. 10.1007/s12221-018-8565-510.1007/s12221-018-8565-5 ↗
25. 10.1002/app.2491210.1002/app.24912 ↗
26. 10.1039/c0cs00108b10.1039/c0cs00108b ↗
27. 10.1016/j.mattod.2013.06.00410.1016/j.mattod.2013.06.004 ↗
28. 10.1016/j.carbpol.2012.05.02610.1016/j.carbpol.2012.05.026 ↗
29. 10.1021/ma011493a10.1021/ma011493a ↗
30. 10.1016/j.compscitech.2006.12.01210.1016/j.compscitech.2006.12.012 ↗
31. 10.1002/(SICI)1097-4628(20000628)76:14<2080::AID-APP12>3.0.CO;2-U10.1002/(SICI)1097-4628(20000628)76:14<2080::AID-APP12>3.0.CO;2-U ↗
32. 10.1016/j.eurpolymj.2008.06.02310.1016/j.eurpolymj.2008.06.023 ↗
33. 10.1016/j.tifs.2011.01.00710.1016/j.tifs.2011.01.007 ↗
34. 10.1016/S0926-6690(97)10015-210.1016/S0926-6690(97)10015-2 ↗
35. 10.5185/amlett.2019.218210.5185/amlett.2019.2182 ↗
36. 10.1002/app.3016010.1002/app.30160 ↗
37. 10.1007/s10570-007-9141-010.1007/s10570-007-9141-0 ↗
38. 10.1016/j.compositesa.2008.11.00910.1016/j.compositesa.2008.11.009 ↗
39. 10.1002/app.3007210.1002/app.30072 ↗
40. 10.1063/1.245066610.1063/1.2450666 ↗
41. 10.1021/bm901383a10.1021/bm901383a ↗
42. 10.1002/app.1046010.1002/app.10460 ↗
43. 10.1016/j.polymdegradstab.2010.12.01610.1016/j.polymdegradstab.2010.12.016 ↗
44. 10.1016/j.carres.2004.11.02710.1016/j.carres.2004.11.027 ↗
45. 10.1007/s12221-015-0529-410.1007/s12221-015-0529-4 ↗
46. Tadmor Z · 2006
47. 10.1016/j.polymer.2007.03.06210.1016/j.polymer.2007.03.062 ↗
48. 10.1007/s10570-007-9192-210.1007/s10570-007-9192-2 ↗
49. 10.1016/j.carbpol.2010.01.05910.1016/j.carbpol.2010.01.059 ↗
50. 10.1016/j.biortech.2009.06.09510.1016/j.biortech.2009.06.095 ↗
51. 10.1007/s10570-012-9684-610.1007/s10570-012-9684-6 ↗
52. 10.1007/s10570-007-9145-910.1007/s10570-007-9145-9 ↗
53. 10.1016/j.carbpol.2012.08.01010.1016/j.carbpol.2012.08.010 ↗
54. 10.15376/biores.12.3.5826-583710.15376/biores.12.3.5826-5837 ↗
55. 10.1016/j.ijbiomac.2018.12.20210.1016/j.ijbiomac.2018.12.202 ↗
56. 10.1007/s10570-015-0554-x10.1007/s10570-015-0554-x ↗
57. 10.1021/bm034519+10.1021/bm034519+ ↗
58. 10.1016/j.apmt.2017.08.00210.1016/j.apmt.2017.08.002 ↗
59. 10.1021/am300852a10.1021/am300852a ↗
60. Jonoobi M · BioResources · 2009 · 4 · 62610.15376/biores.4.2.626-639 ↗
61. 10.3390/ma709610510.3390/ma7096105 ↗
62. 10.1016/j.carbpol.2011.02.02110.1016/j.carbpol.2011.02.021 ↗
63. 10.1007/s10570-013-0019-z10.1007/s10570-013-0019-z ↗
64. 10.5185/amlett.2019.220510.5185/amlett.2019.2205 ↗
65. 10.1016/j.fbp.2019.08.00310.1016/j.fbp.2019.08.003 ↗