Composite Failure Surface Analysis
Source abstract
Abstract
In this work, the features of the fracture surfaces of graphite-epoxy specimens as seen by both optical and scann ing electronic microscope (SEM) are presented. A variety of test conditions were investigated. They are: tension (quasi- static), compression (quasi-static), and tension-tension fatigue. Failure due to delamination was also studied (Mode I-Peel Testing). The sequence of events leading to failure was monitored using an X-ray technique with an opaque additive for image enhancement. After mechanical testing, specimens were sectioned and prepared for microscopic analysis. Two principal fracture surface features were identified: (1) overlapping platelets of epoxy and (2) branched microcrack structures. These fatures could be used to identify the direc tion of failure propagation and, in some cases, distinguish between failure modes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Electron and X-Ray Spectroscopy Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
General Dynamics Fort Worth Division Fort Worth, Texas 76101
References (4)
Show source-provided references
1. 1975
2. F.H. Chang, et al. · 1974
3. S. Sutton · 1974
4. G. Morris