journal article·1991-04

Processing and Characterization of Laminated SiC Whisker Reinforced Al 2 O 3

E. D. Kragness, M. F. Amateau, G. L. Messing

Journal of Composite Materials· Volume 25· Issue 4
Publisher page

Abstract

Laminated silicon carbide (SiC) whisker/alumina (Al 2 O 3 ) composites were fabricated by tape casting and hot pressing. Whisker loadings of 10 and 20 vol % were produced with a predominance of fiber orientation in the direction of casting. Elastic, thermal and mechanical properties of the composites were measured in the longitudinal and transverse directions. The elastic moduli for 10 and 20 whisker vol% Al 2 O 3 composites were approximately the same as unreinforced alumina. The coefficient of thermal expansion was reduced by the addition of the whiskers. The fracture toughness of the composites increased with whisker content from 3.8 MPa m 1/2 for pure alumina to 8.0 MPa m 1/2 for 20 vol% whiskers in the longitudinal direction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Pennsylvania State University 224 Applied Science Building University Park, PA 16802

References (25)

Show source-provided references
1. Wei, C. G. · Am. Ceram. Soc. Bull. · 1985 · 64 · 298
2. Buljan, S. T. · Am. Ceram. Soc. Bull. · 1987 · 66 · 347
3. Shalek, P. D. · Am. Ceram. Soc. Bull. · 1986 · 65 · 351
4. Lundberg, R. · Am. Ceram. Soc. Bull. · 1987 · 330
5. Homeny, J. · Am Ceram. Soc. Bull. · 1987 · 67 · 333
6. Becher, P. F. · J. Am. Ceram. Soc. · 1981 · 67 · C267
7. Becher, P. F. · Ceram. Eng. and Sci. Proc. · 1985 · 6 · 61
8. Mistler, R. E. · Am. Ceram. Soc. Bull. · 1973 · 52 · 850
9. Dayton, G. D. · 1984 · 115
10. Gac, F. D. · Am. Ceram. Soc. Bull. · 1985 · 64 · 725
11. Hyatt, E. P. · Am. Ceram. Soc. Bull. · 1986 · 65 · 637
12. Tormey, E. S. · 1981 · 140
13. 13. Frados, J., ed. 1976. Plastics Engineering Handbook. Fourth edition. New York: Van Nostrand Reinhold Co., pp. 477–479.
14. 10.1111/j.1151-2916.1984.tb19730.x10.1111/j.1151-2916.1984.tb19730.x ↗
15. Gadkaree, K. P. · Am. Ceram. Soc. Bull. · 1986 · 65 · 370
16. 16. Schreiber, E., O. L. Anderson and N. Soya. 1973. Elastic Constants and Their Measurement. New York: McGraw-Hill, pp. 83–125.
17. 10.1111/j.1151-2916.1981.tb10321.x10.1111/j.1151-2916.1981.tb10321.x ↗
18. 10.1111/j.1151-2916.1983.tb10571.x10.1111/j.1151-2916.1983.tb10571.x ↗
19. 10.1115/1.360786210.1115/1.3607862 ↗
20. 10.1002/pc.75006010810.1002/pc.750060108 ↗
21. 10.1002/pen.76016051210.1002/pen.760160512 ↗
22. Lynch, C. T. · 1975
23. 10.1177/00219983680020030810.1177/002199836800200308 ↗
24. Tiegs, T. N. · Am. Ceram. Soc. Bull. · 1987 · 66 · 339
25. 25. Kirchner, H. P. 1979. Strengthening of Ceramics. New York: Marcel-Dekker, pp. 91–95.