Variability of flax fibre morphology and mechanical properties in injection moulded short straw flax fibre-reinforced PP composites
Source abstract
Abstract
The influence of compounding and injection moulding on the initial variability and morphology of short straw flax fibres is determined and the mechanical properties for the injection moulded fibre reinforced composites are measured. It is found that the composition of the straw flax, flax fibre bundles and woody parts, together with the cutting process strongly affects the initial fibre morphology and its variability. In the initial fibres, small particles as well as long fibres with large width were found. A filter was used to reject the fibres with an aspect ratio below 15 before calculating statistics because these fibres have a negligible contribution to the composite reinforcement. After processing, the initial fibre length and width decrease strongly (−38% to −66% for length and −22% to −72% for width). Also, the variability is affected resulting in a standard deviation shifted towards lower fibre lengths and widths (−55% for length and −71% for width). The improvement of mechanical properties of the flax compound compared to the pure matrix material for the injection-moulded samples is found to be similar to the results for compounds with further processed flax fibres such as scutched and hackled fibres. An increase of tensile strength by 20% was found, for stiffness the increase is in the order of 50–70%. This indicates that despite the very large variability of the initial straw flax fibres and the strong changes of the variability in each processing step, a compound is obtained with improved mechanical properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
PMA Division, Department of Mechanical Engineering, KU Leuven, Belgium
Technology Campus Ostend, KU Leuven, Belgium
Department of Materials Engineering, KU Leuven, Belgium
References (30)
Show source-provided references
1. 10.1016/j.compositesa.2003.09.01610.1016/j.compositesa.2003.09.016 ↗
2. Eberle R and Franze H. Modeling the use phase of passenger cars in LCI. SAE Technical Paper 982179, 1998.10.4271/982179 ↗
3. Steuernagel L, Meiners G and Ziegmann D. Recycling of fiber reinforced thermoplastics – natural fibers vs. glass fibers. In: Composites Week @Leuven and TexComp-11 Conference . Leuven, Belgium, 16–20 September 2013. Leuven.
4. 10.1016/j.compscitech.2005.01.00810.1016/j.compscitech.2005.01.008 ↗
5. 10.1016/j.compositesa.2008.05.00810.1016/j.compositesa.2008.05.008 ↗
6. 10.1016/j.polymdegradstab.2008.12.01010.1016/j.polymdegradstab.2008.12.010 ↗
7. 10.1002/pc.2009710.1002/pc.20097 ↗
8. 10.1016/j.compositesa.2011.07.02710.1016/j.compositesa.2011.07.027 ↗
9. 10.1016/j.compositesa.2005.10.01110.1016/j.compositesa.2005.10.011 ↗
10. 10.1016/j.compositesa.2011.07.01210.1016/j.compositesa.2011.07.012 ↗
11. 10.1177/073168440910446510.1177/0731684409104465 ↗
12. Van sumere C · 1992
13. Bos HL. The potential of flax fibres as reinforcement for composite materials, Technische Universiteit Eindhoven, 2004.
14. 10.1002/pc.2314110.1002/pc.23141 ↗
15. 10.1016/j.compositesa.2008.12.01410.1016/j.compositesa.2008.12.014 ↗
16. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
17. 10.1007/s10853-011-5581-x10.1007/s10853-011-5581-x ↗
18. 10.1016/j.compositesa.2011.01.01310.1016/j.compositesa.2011.01.013 ↗
19. 10.1002/pc.2018410.1002/pc.20184 ↗
20. 10.1016/S0266-3538(99)00024-X10.1016/S0266-3538(99)00024-X ↗
21. 10.1016/j.compositesa.2012.08.02010.1016/j.compositesa.2012.08.020 ↗
22. 10.1016/j.compstruc.2012.10.02610.1016/j.compstruc.2012.10.026 ↗
23. 10.1002/pc.2226010.1002/pc.22260 ↗
24. A.B.V. Algemeen Belgisch Vlasverbond, http://www.vlasverbond.be/ (2015, accessed 15 March 2016).
25. 10.1016/j.compositesa.2014.04.01110.1016/j.compositesa.2014.04.011 ↗
26. CELABOR. CELABOR http://www.celabor.be/ (2015, accessed 17 March 2016).
27. 10.1016/j.carbpol.2010.04.02210.1016/j.carbpol.2010.04.022 ↗
28. 10.1023/B:JMSC.0000007768.63055.ae10.1023/B:JMSC.0000007768.63055.ae ↗
29. 10.1016/j.carbpol.2014.11.02410.1016/j.carbpol.2014.11.024 ↗
30. 10.1016/j.carbpol.2015.06.10110.1016/j.carbpol.2015.06.101 ↗