Mode I Delamination of a Three-Dimensional Fabric Composite
Source abstract
Abstract
Finite element analysis was conducted on the double cantilever beam speci men (DCB) of carbon-epoxy (T300/3501-6) orthogonal interlocked fabric composites. The Mode I strain energy release rate, G I , was evaluated to investigate the influence of through-the-thickness (z-axis) fibers on crack driving force as a function of crack length. The finite element analysis of the DCB specimens showed good agreement with ex perimental results for both compliance and strain energy release rate. The presence of z- axis fibers sharply reduced the strain energy release rate in comparison to the traditional two dimensional (2-D) laminated material. A parametric study revealed that increasing the z-axis fiber stiffness reduces G I . Progressive debonding of the z-axis reinforcement was also modelled. The Mode I strain energy release rate increased as the fiber debonded but was significantly less than the 2-D laminated material in all cases investigated. A model for the prediction of critical load is proposed for Mode I interlaminar fracture of 3-D orthogonal interlocked fabric composites. Fundamental inputs to the model are the z-axis fiber properties, fiber architecture, fiber volume fraction and the Mode I critical strain energy release rate for the 2-D laminate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Composite Materials Department of Mechanical Engineering University of Delaware Newark, DE 19716
References (17)
Show source-provided references
1. 10.1016/0266-3538(85)90019-310.1016/0266-3538(85)90019-3 ↗
2. Becht, G.J. · Polymer Composites
3. Masters, J.E. · ASTM STP · 1987 · 948 · 238
4. Macander, A.B. · ASTM STP · 1986 · 873 · 422
5. 10.2514/6.1986-102010.2514/6.1986-1020 ↗
6. Taske, L.
7. Mignery, L.A. · ASTM STP · 1985 · 876 · 371
8. Ogo, Y. · 1987
9. Guenon, V.A. · Journal of Materials Science
10. Guenon, V.A. · 1987
11. MSC NASTRAN Version 65, The MacNeal-Schwendler Corporation (November 1985).
12. 10.1016/0013-7944(77)90013-310.1016/0013-7944(77)90013-3 ↗
13. Wilkins, D.J. · ASTM STP · 1982 · 775 · 168
14. 10.1007/BF0054182810.1007/BF00541828 ↗
15. 10.1007/BF0265009110.1007/BF02650091 ↗
16. 10.1177/00219983860200050510.1177/002199838602000505 ↗
17. Mostovoy, S. · Journal of Materials · 1967 · 2 · 661