Drilling-induced delamination effect on the bending and out-of-plane shear characteristics of the woven carbon/epoxy composites
Source abstract
Abstract
The drilling process of laminated composites presents significant challenges in control and frequently results in delamination. As one of the most critical forms of damage, drilling-induced delamination has become a prominent research focus due to its considerable engineering significance. This phenomenon notably impacts the structural integrity of composite materials when subjected to various loading conditions. Among the mechanical properties influenced by drilling-induced delamination, the load-carrying capacity (LCC) of specimens under bending and shear forces has received limited scholarly attention. The present research investigated the impact of drilling-induced delamination on the open-hole (OH) bending and out-of-plane shear characteristics of carbon/epoxy composites. A series of hole-making scenarios were carried out to achieve the minimal and maximal dimensions of delamination. A broad series of mechanical tests were performed using redesigned symmetrical and anti-symmetrical four-point bend test (4PBT) procedures on the OH samples. Utilizing the test configuration, the OH samples were subjected to pure bending (PB), reverse pure bending (RB), and out-of-plane shear (OS) loads. The results showed that drilling-induced delamination, with a typical dimension surrounding the hole with a ratio of hole diameter to width ( d / w ) of 0.19, can reduce the LCC of OH samples subjected to PB, RB, and OS loads by approximately 2.4, 5, and 1.1%, respectively. In cases where the delamination dimension increases, the LCC of the samples decreases more.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Iran University of Science and Technology
References (62)
Show source-provided references
1. 10.1016/j.compositesa.2019.10555210.1016/j.compositesa.2019.105552 ↗
2. 10.1016/B978-0-443-22118-7.00015-410.1016/B978-0-443-22118-7.00015-4 ↗
3. 10.1016/j.jmatprotec.2006.11.14610.1016/j.jmatprotec.2006.11.146 ↗
4. 10.1016/j.compstruct.2019.02.09910.1016/j.compstruct.2019.02.099 ↗
5. 10.1016/j.compstruct.2019.02.02510.1016/j.compstruct.2019.02.025 ↗
6. 10.1016/j.jcomc.2023.10035610.1016/j.jcomc.2023.100356 ↗
7. 10.1016/S0263-8223(03)00180-610.1016/S0263-8223(03)00180-6 ↗
8. 10.1016/j.mtsust.2025.10108510.1016/j.mtsust.2025.101085 ↗
9. 10.1016/j.matpr.2021.09.26710.1016/j.matpr.2021.09.267 ↗
10. 10.3390/jcs711046810.3390/jcs7110468 ↗
11. 10.1016/j.compscitech.2008.06.00310.1016/j.compscitech.2008.06.003 ↗
12. 10.1177/00219983910250010110.1177/002199839102500101 ↗
13. 10.1504/IJMPT.2021.11520210.1504/IJMPT.2021.115202 ↗
14. 10.1016/j.compscitech.2023.11004410.1016/j.compscitech.2023.110044 ↗
15. 10.1016/j.matdes.2012.03.04010.1016/j.matdes.2012.03.040 ↗
16. 10.1007/s00170-004-2282-510.1007/s00170-004-2282-5 ↗
17. 10.1016/j.promfg.2015.07.01710.1016/j.promfg.2015.07.017 ↗
18. 10.1016/j.compstruct.2017.01.01710.1016/j.compstruct.2017.01.017 ↗
19. 10.1016/j.compstruct.2012.10.04410.1016/j.compstruct.2012.10.044 ↗
20. 10.1016/j.compstruct.2018.06.04110.1016/j.compstruct.2018.06.041 ↗
21. Garrigues E. A review of industrial aeroelasticity practices at dassault aviation for military aircraft and business jets. Aerospace Lab 2018: 1–34.
22. ASTM D3171-15; Standard Test Methods for Constituent Content of Composite Materials. ASTM International: West Conshohocken PA USA 2015.
23. ASTM D3418-15. Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry. West Conshohocken, PA: ASTM International, 2015.
24. ASTM D3039/D3039M, . Standard test method for tensile properties of polymer matrix composite materials. American Society for Testing Materials. 2004.
25. ASTM D. 6641/D 6641M-09; Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture. ASTM International, 2024.
26. ASTM. D3518 standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a 45 laminate. ASTM International. 2001.
27. 10.1520/STP12588S10.1520/STP12588S ↗
28. 10.1016/j.compositesa.2006.07.00810.1016/j.compositesa.2006.07.008 ↗
29. 10.1016/j.compositesa.2008.12.01310.1016/j.compositesa.2008.12.013 ↗
30. 10.1177/002199830933986510.1177/0021998309339865 ↗
31. 10.1016/j.jmapro.2021.06.05410.1016/j.jmapro.2021.06.054 ↗
32. 10.1016/j.ijmachtools.2005.01.01510.1016/j.ijmachtools.2005.01.015 ↗
33. 10.1016/j.ijlmm.2020.06.00110.1016/j.ijlmm.2020.06.001 ↗
34. 10.1016/j.ijmachtools.2005.10.00410.1016/j.ijmachtools.2005.10.004 ↗
35. 10.1016/j.cirp.2012.03.03610.1016/j.cirp.2012.03.036 ↗
36. ASTM D7264/D7264M. Standard test method for flexural properties of polymer matrix composite materials. ASTM International, 2015.
37. 10.1016/j.compositesb.2021.10880310.1016/j.compositesb.2021.108803 ↗
38. 10.1201/b1661810.1201/b16618 ↗
39. 10.1016/j.compstruct.2013.04.02610.1016/j.compstruct.2013.04.026 ↗
40. 10.1016/j.compositesa.2012.11.02010.1016/j.compositesa.2012.11.020 ↗
41. ASTM D2344/D2344M-22. Standard test method for short-beam strength of polymer matrix composite materials and their laminates. ASTM International, 2000.
42. 10.1016/j.compstruct.2020.11206510.1016/j.compstruct.2020.112065 ↗
43. 10.1016/j.compositesa.2018.06.01410.1016/j.compositesa.2018.06.014 ↗
44. 10.1016/j.compstruct.2022.11596810.1016/j.compstruct.2022.115968 ↗
45. 10.1007/BF0076623210.1007/BF00766232 ↗
46. 10.1007/s00226-003-0180-x10.1007/s00226-003-0180-x ↗
47. 10.1186/s10086-021-01954-y10.1186/s10086-021-01954-y ↗
48. 10.1016/S0921-5093(02)00168-510.1016/S0921-5093(02)00168-5 ↗
49. 10.1016/j.compositesb.2019.01.00510.1016/j.compositesb.2019.01.005 ↗
50. 10.1016/j.jmrt.2022.09.10010.1016/j.jmrt.2022.09.100 ↗
51. 10.3390/polym1314224610.3390/polym13142246 ↗
52. 10.1016/j.tws.2018.12.03510.1016/j.tws.2018.12.035 ↗
53. 10.1016/j.compstruct.2011.11.02410.1016/j.compstruct.2011.11.024 ↗
54. 10.1016/0890-6955(96)00013-210.1016/0890-6955(96)00013-2 ↗
55. 10.1186/s10033-022-00818-w10.1186/s10033-022-00818-w ↗
56. 10.1016/j.compositesb.2021.10915510.1016/j.compositesb.2021.109155 ↗
57. 10.1016/j.compstruct.2022.11553410.1016/j.compstruct.2022.115534 ↗
58. 10.1016/j.aej.2023.08.00410.1016/j.aej.2023.08.004 ↗
59. 10.1016/j.jmapro.2021.08.04210.1016/j.jmapro.2021.08.042 ↗
60. 10.1016/j.compstruct.2024.11790310.1016/j.compstruct.2024.117903 ↗
61. 10.1016/j.engfracmech.2018.04.02010.1016/j.engfracmech.2018.04.020 ↗
62. Ho-Cheng H Dharan C. Delamination during drilling in composite laminates. 1990.10.1115/1.2899580 ↗