journal article·2016-04

Experimental Study of Circular RC Columns Strengthened with Longitudinal CFRP Composites under Eccentric Loading: Comparative Evaluation of EBR and EBROG Methods

Davood Mostofinejad, Ala Torabian

Publisher page

Abstract

Application of carbon fiber-reinforced polymer (CFRP) composites has been promoted successfully for strengthening or repairing concrete structural members. However, if a column member is strengthened with longitudinal FRP sheets in which fibers are laid parallel to the column axis, the FRP composite will soon buckle under compression to ultimately debond off the concrete surface. It is the objective of the current research to investigate the effect of the recently developed grooving method (GM) on cylindrical specimens strengthened with FRP sheets under compressive loading, and to determine whether GM postpones the buckling of FRP sheets and their debonding off the concrete substrate. For the purposes of this study, 35 cylindrical reinforced concrete specimens, 150 mm in diameter and 500 mm in height, were tested under compressive loading with eccentricities of zero, 30, 60, and 90 mm. The specimens were additionally subjected to the four-point flexural bending test to represent infinity eccentricity. Fiber-reinforced polymer (FRP) sheets with longitudinal fibers parallel to the column axis were installed using the conventional externally bonded reinforcement (EBR) and grooving method, taking advantage of the special technique of externally bonded reinforcement on grooves (EBROG). Experimental results revealed that the grooving method was much more effective than the EBR in increasing the load-carrying capacity of the specimens. Moreover, it was found that longitudinal fibers exhibited an enhanced effect with increasing load eccentricity. The results showed that in the columns strengthened with longitudinal FRP strips using the EBROG method, the load-carrying capacity enhancements of 8.3, 12.2, 25.8, 36.0, and 53.3% relative to those of the controls were achieved for 0, 30, 60, 90 mm, and infinity eccentricities, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Professor, Dept. of Civil Engineering, Isfahan Univ. of Technology (IUT), 8415683111 Isfahan, Iran.

Ph.D. Student, Dept. of Civil Engineering, Isfahan Univ. of Technology (IUT), 8415683111 Isfahan, Iran (corresponding author).

References (46)

Show source-provided references
1. 10.1016/S0266-3538(97)00077-810.1016/S0266-3538(97)00077-8 ↗
2. ACI (American Concrete Institute). (2008). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2 R-08 Farmington Hills MI.
3. ACI (American Concrete Institute). (2011). “Building code requirements for structural concrete and commentary.” ACI 318-11 Farmington Hills MI.
4. Agarwal B. D. · 1990
5. ASTM. (2005). “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM C39/C 39M-04a West Conshohocken PA.
6. 10.1061/(ASCE)1090-0268(2005)9:5(397)10.1061/(ASCE)1090-0268(2005)9:5(397) ↗
7. 10.1016/j.conbuildmat.2010.02.02410.1016/j.conbuildmat.2010.02.024 ↗
8. Concrete Society. (2004). “Design guidance for strengthening concrete structures using fiber composite materials.” Technical Rep. No. 55 Camberley Surrey U.K.
9. 10.1016/0263-8223(94)00060-310.1016/0263-8223(94)00060-3 ↗
10. Ehsani M. R. · 1993 · 35
11. 10.1016/j.conbuildmat.2011.10.02510.1016/j.conbuildmat.2011.10.025 ↗
12. 10.1061/(ASCE)CC.1943-5614.000007310.1061/(ASCE)CC.1943-5614.0000073 ↗
13. 10.1016/j.compstruct.2005.06.00710.1016/j.compstruct.2005.06.007 ↗
14. 10.1016/j.conbuildmat.2008.05.02410.1016/j.conbuildmat.2008.05.024 ↗
15. Hajrasouliha M. J. and Mostofinejad D. (2010). “Grooving as a substitute method of conventional surface preparation for elimination of debonding of FRP laminates from concrete surface.” 9th Int. Congress on Advances in Civil Engineering Karadeniz Technical Univ. Trabzon Turkey.10.1007/978-3-642-17487-2_118 ↗
16. 10.1061/(ASCE)1090-0268(2009)13:2(135)10.1061/(ASCE)1090-0268(2009)13:2(135) ↗
17. 10.1016/j.ijadhadh.2005.03.01510.1016/j.ijadhadh.2005.03.015 ↗
18. JSCE (Japan Society of Civil Engineers). (2001). Recommendations for upgrading of concrete structures with use of continuous fiber sheets Tokyo.
19. 10.1016/j.compscitech.2006.12.00110.1016/j.compscitech.2006.12.001 ↗
20. 10.1016/j.compstruct.2005.05.00110.1016/j.compstruct.2005.05.001 ↗
21. 10.1061/(ASCE)1090-0268(2009)13:1(13)10.1061/(ASCE)1090-0268(2009)13:1(13) ↗
22. 10.1016/j.matdes.2009.12.00410.1016/j.matdes.2009.12.004 ↗
23. 10.1016/j.compositesb.2012.09.05510.1016/j.compositesb.2012.09.055 ↗
24. 10.1061/(ASCE)1090-0268(1998)2:4(175)10.1061/(ASCE)1090-0268(1998)2:4(175) ↗
25. 10.1061/(ASCE)CC.1943-5614.000011710.1061/(ASCE)CC.1943-5614.0000117 ↗
26. 10.1061/(ASCE)CC.1943-5614.000054510.1061/(ASCE)CC.1943-5614.0000545 ↗
27. 10.1617/s11527-013-0171-910.1617/s11527-013-0171-9 ↗
28. 10.1016/j.proeng.2011.07.40110.1016/j.proeng.2011.07.401 ↗
29. 10.1016/j.conbuildmat.2012.09.03010.1016/j.conbuildmat.2012.09.030 ↗
30. 10.1016/j.conbuildmat.2010.11.03510.1016/j.conbuildmat.2010.11.035 ↗
31. 10.1016/j.conbuildmat.2010.07.03410.1016/j.conbuildmat.2010.07.034 ↗
32. 10.1061/(ASCE)CC.1943-5614.000010010.1061/(ASCE)CC.1943-5614.0000100 ↗
33. Sika Group. (2006). Product data sheet: SikaWrap-300 C woven carbon fiber fabric for structural strengthening Zurich Switzerland.
34. 10.1061/(ASCE)1090-0268(1999)3:3(143)10.1061/(ASCE)1090-0268(1999)3:3(143) ↗
35. 10.1007/s11029-007-0019-x10.1007/s11029-007-0019-x ↗
36. 10.1061/(ASCE)1090-0268(2002)6:3(175)10.1061/(ASCE)1090-0268(2002)6:3(175) ↗
37. Taranu N. Cozmanciuc C. and Oltean R. (2011). “Experimental study of reinforced concrete columns confined with composite membranes.” Bulletin of the Polytechnic Institute of Jassy Romania 33–45.
38. 10.1016/j.conbuildmat.2013.05.08510.1016/j.conbuildmat.2013.05.085 ↗
39. 10.1016/j.proeng.2013.03.03310.1016/j.proeng.2013.03.033 ↗
40. 10.1016/0010-4361(90)90438-310.1016/0010-4361(90)90438-3 ↗
41. Wu W. (1990). “Thermomechanical properties of fiber reinforced plastics (FRP) bars.” Ph.D. thesis Dept. of Civil and Environmental Engineering West Virginia Univ. Morgantown WV.
42. 10.1016/j.compstruct.2012.11.02310.1016/j.compstruct.2012.11.023 ↗
43. 10.1016/j.engstruct.2009.08.01210.1016/j.engstruct.2009.08.012 ↗
44. 10.1061/(ASCE)0899-1561(2000)12:2(139)10.1061/(ASCE)0899-1561(2000)12:2(139) ↗
45. 10.1016/j.compositesa.2005.12.00410.1016/j.compositesa.2005.12.004 ↗
46. 10.1016/0266-3538(94)90160-010.1016/0266-3538(94)90160-0 ↗