journal article·2009-10

Effect of Transverse Steel on the Response of RC Beams Strengthened in Shear by FRP: Experimental Study

Ernesto Grande, Maura Imbimbo, Alessandro Rasulo

Publisher page

Abstract

The present paper shows and discusses some of the results obtained within an experimental investigation carried out on 15 reinforced concrete (RC) beams strengthened in shear by externally bonded fiber-reinforced plastics (FRP) sheets. The aim of the study is to analyze the influence that the geometrical percentage of transverse steel reinforcement could have on the FRP resisting action. In particular, the objectives of the experimental campaign are to explore the possible interaction between FRP and steel transverse reinforcement resisting actions, analyzing the deformation behavior of the shear resisting system (FRP, transverse steel, and concrete) and the modes of failure of the strengthened and not strengthened beams. The results of the tests in terms of shear capacity are compared to the design formulations provided by the American Concrete Institute and the National Research Council of Italy code-format recommendations.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Ph.D. in Structural Engineering, Dept. of Mechanics, Structures and Environment, Univ. of Cassino, via G. Di Biasio, Cassino (FR) 43, 0343, Italy.

Associate Professor in Structural Engineering, Dept. of Mechanics, Structures and Environment, Univ. of Cassino, via G. Di Biasio, Cassino (FR) 43, 0343, Italy (corresponding author).

Assistant Professor in Structural Engineering, Dept. of Mechanics, Structures and Environment, Univ. of Cassino, via G. Di Biasio, Cassino (FR) 43, 0343, Italy.

References (32)

Show source-provided references
1. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures
2. 10.1016/j.compositesb.2005.05.01210.1016/j.compositesb.2005.05.012 ↗
3. Canadian Standards Association (CSA). (2002). “Design and construction of building components with fiber-reinforced polymer.” CSA S806–02 Ont. Canada.
4. 10.1139/cjce-25-4-69210.1139/cjce-25-4-692 ↗
5. Shear strengthening of reinforced concrete beams using externally applied composite fabrics
6. Chen J. F. · 2006 · 143
7. 10.1061/(ASCE)0733-9445(2003)129:5(615)10.1061/(ASCE)0733-9445(2003)129:5(615) ↗
8. 10.1016/S0950-0618(02)00091-010.1016/S0950-0618(02)00091-0 ↗
9. Denton S. R. Shave J. D. and Porter A. D. (2004). “Shear strengthening of reinforced concrete structures using FRP composites.” Proc. Int. Conf. on Advanced Polymer Composites for Structural Applications in Construction Woodhead Publishing Limited Abington Hall Abington Cambridge U.K. 134–143.10.1533/9781845690649.2.134 ↗
10. Ente Italiano di Unificazione (UNI). (2003). “Prove distruttive sui calcestruzzi. Prova di compressione.” UNI EN 12390–3 Italy (in Italian).
11. Ente Italiano di Unificazione (UNI). (2004). “Materiali metallici. Prova di trazione. Metodo di prova (temperatura ambiente).” UNI EN 10002–1 Italy (in Italian).
12. 10.1016/S0263-8223(99)00036-710.1016/S0263-8223(99)00036-7 ↗
13. Grande E. Imbimbo M. and Rasulo A. (2007). “Experimental behavior of RC beams strengthened in shear by FRP sheets.” Proc. Conf. on FRP Composites in Civil Engineering (FRPRCS—8) (CD-ROM) Patrasso Greece.
14. 10.1061/(ASCE)1090-0268(2006)10:6(464)10.1061/(ASCE)1090-0268(2006)10:6(464) ↗
15. 10.1061/(ASCE)1090-0268(2004)8:5(415)10.1061/(ASCE)1090-0268(2004)8:5(415) ↗
16. International Federation for Structural Concrete (FIB). (2001). “Externally bonded fiber polymer reinforcement (FRP EBR) for reinforced concrete structures.” FIB-TG9.3 Lausanne Switzerland.
17. 10.1061/(ASCE)1090-0268(1998)2:4(195)10.1061/(ASCE)1090-0268(1998)2:4(195) ↗
18. 10.1016/S0958-9465(99)00051-710.1016/S0958-9465(99)00051-7 ↗
19. 10.1016/S0950-0618(02)00002-810.1016/S0950-0618(02)00002-8 ↗
20. 10.1061/(ASCE)0733-9445(2001)127:4(374)10.1061/(ASCE)0733-9445(2001)127:4(374) ↗
21. Analytical study of reinforced concrete beams strengthened with web-bonded fibre reinforced plates or fabrics
22. 10.1016/j.engstruct.2005.08.01010.1016/j.engstruct.2005.08.010 ↗
23. Monti G. Santinelli F. and Liotta M. A. (2004). “Shear strengthening of beams with composite materials.” Proc. 2nd Int. Conf. on FRP Composites in Civil Engineering (CICE) 2005 Taylor & Francis Group Adelaide Australia.10.1201/9780203970850.ch63 ↗
24. National Research Council of Italy (CNR). (2006). “Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. Materials RC and PC structures and masonry structures.” CNR-DT200 Rome.
25. 10.1061/(ASCE)0733-9445(1997)123:7(903)10.1061/(ASCE)0733-9445(1997)123:7(903) ↗
26. 10.1061/(ASCE)1090-0268(2002)6:2(104)10.1061/(ASCE)1090-0268(2002)6:2(104) ↗
27. Fiber reinforced polymer shear strengthening of reinforced concrete beams: Experimental study and analytical modeling
28. Qu Z. · 2005 · 371
29. Rasulo A. and Imbimbo M. (2006). “The influence of transverse steel and FRP configurations on the shear behavior of RC beams.” Proc. Conf. FIB 06 doppiavoce Naples Italy.
30. Teng J. G. · 2002
31. 10.1002/pse.17910.1002/pse.179 ↗
32. Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites