journal article·2016-02

Bolted Sleeve Joints for Connecting Pultruded FRP Tubular Components

Fu Jia Luo, Yu Bai, Xiao Yang, Ye Lu

Publisher page

Abstract

This paper investigates bolted sleeve joints for connecting tubular pultruded fiber-reinforced polymer (FRP) sections in tubular structures such as space frames. In the proposed joint, FRP profile and steel connector are telescoped and then clamped by mechanical bolts. Four batches of specimens were prepared and tested under static axial loading (tension and compression). Design parameters, namely the type of fastener (ordinary bolt or blind bolt), member size, and bolt group layout, were selected and examined. During experiments, failure modes, load-displacement and load-strain relationships were recorded to evaluate the joint performance. A staggered pattern within a bolted sleeve joint had a negligible effect on the load distribution compared with a nonstaggered pattern. The study showed that the joint capacity could be optimized effectively by adjusting the joint geometry. When blind bolts are used, a compromise between ease of cavity fixing and joint performance must be noted. Finally, a simple analytical design model was proposed to estimate the joint capacity.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Postgraduate Student, Dept. of Civil Engineering, Monash Univ., Clayton, VIC 3800, Australia.

Senior Lecturer, Dept. of Civil Engineering, Monash Univ., Clayton, VIC 3800, Australia (corresponding author).

Lecturer, Dept. of Civil Engineering, Monash Univ., Clayton, VIC 3800, Australia.

References (46)

Show source-provided references
1. ASTM. (2003). “Standard test method for tensile properties of polymer matrix composite materials.” D3039/D3039 M West Conshohocken PA.
2. ASTM. (2006a). “Standard test method for short-beam strength of polymer matrix composite materials and their laminates.” D2344 West Conshohocken PA.
3. ASTM. (2006b). “Standard test methods for constituent content of composite materials.” D3171-06 West Conshohocken PA.
4. ASTM. (2012). “Standard test methods and definitions for mechanical testing of steel products.” A370-12a West Conshohocken PA.
5. Australian Standard. (1998). “Steel structures.” AS 4100-1998 Sydney Australia.
6. Novel joint for assembly of all-composite space truss structures: Conceptual design and preliminary study
7. 10.1016/j.compstruct.2012.05.01610.1016/j.compstruct.2012.05.016 ↗
8. 10.1061/(ASCE)1090-0268(2002)6:2(73)10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
9. 10.1002/978047012142910.1002/9780470121429 ↗
10. Bland J. A. · 2009
11. CEN (European Committee for Standardization). (2005). “Eurocode 3: Design of steel structure—Part 1-8: Design of joints.” EN 1993-1-8 Brussels Belgium.
12. Clarke J. L. · 200310.1201/9781482294811 ↗
13. CNR (Consiglio Nazionale delle Ricerche). (2007). “Guide for the design and construction of structures made of FRP pultruded elements.” CNR-DT 205 Advisory Committee on Technical Recommendations for Constructions Italian National Research Council Rome.
14. 10.1016/0263-8223(95)00071-210.1016/0263-8223(95)00071-2 ↗
15. 10.1016/j.compstruct.2012.06.01710.1016/j.compstruct.2012.06.017 ↗
16. 10.1061/(ASCE)1090-0268(2000)4:1(33)10.1061/(ASCE)1090-0268(2000)4:1(33) ↗
17. 10.1007/s11709-013-0216-810.1007/s11709-013-0216-8 ↗
18. GOM (Gesellschaft für Optische Messtechnik). (2015).“ARAMIS—Optical 3D deformation analysis.” 〈http://www.gom.com/3d-software/aramis-software.html〉 (Apr. 22 2015).
19. 10.1016/0010-4361(82)90002-710.1016/0010-4361(82)90002-7 ↗
20. Hagio H. · 2003
21. 10.1007/978-1-4684-1033-4_3210.1007/978-1-4684-1033-4_32 ↗
22. HDR (Henningson Durham and Richardson). (2009). “Point Bonita Lighthouse Bridge.” RG 2858 Central Federal Lands Highway Division U.S. Dept. of Transportation Federal Highway Administration Lakewood CO.
23. 10.1016/j.conbuildmat.2010.04.06210.1016/j.conbuildmat.2010.04.062 ↗
24. 10.1061/(ASCE)1090-0268(2004)8:4(289)10.1061/(ASCE)1090-0268(2004)8:4(289) ↗
25. 10.1061/(ASCE)1090-0268(2007)11:1(99)10.1061/(ASCE)1090-0268(2007)11:1(99) ↗
26. Lan T. T. (2005). “Space frame structures.” Handbook of structural engineering CRC Press Boca Raton FL 24.21–24.50.10.1201/9781420039931.ch24 ↗
27. 10.1016/j.compstruct.2005.01.02810.1016/j.compstruct.2005.01.028 ↗
28. Mockry E. F. (2001). “Pultruded FRP structural assembly for water cooling towers.” The Marley Cooling Tower Company Overland Park KS.
29. 10.1002/pse.15410.1002/pse.154 ↗
30. 10.1680/stbu.2011.164.5.29110.1680/stbu.2011.164.5.291 ↗
31. 10.1016/0010-4361(82)90008-810.1016/0010-4361(82)90008-8 ↗
32. 10.1016/1359-8368(95)00021-610.1016/1359-8368(95)00021-6 ↗
33. 10.1061/(ASCE)0899-1561(1995)7:4(223)10.1061/(ASCE)0899-1561(1995)7:4(223) ↗
34. 10.1016/j.compstruct.2014.06.01110.1016/j.compstruct.2014.06.011 ↗
35. 10.1016/j.compstruct.2014.01.00310.1016/j.compstruct.2014.01.003 ↗
36. 10.1016/j.compstruct.2009.02.00710.1016/j.compstruct.2009.02.007 ↗
37. Smith A. · 2009
38. Sobrino J. and Pulido G. (2002). “A new glass-fibre reinforced plastic footbridge.” Proc. Int. Conf. on the Design and Dynamic Behaviour of Footbridges Structurae Berlin.10.2749/222137802796336937 ↗
39. 10.1002/stab.20049014910.1002/stab.200490149 ↗
40. Troughton M. J. · 2008
41. 10.1002/1528-2716(200004/06)2:2<146::AID-PSE18>3.0.CO;2-010.1002/1528-2716(200004/06)2:2<146::AID-PSE18>3.0.CO;2-0 ↗
42. Waldron C. J. (2001). “Determination of the design parameters for the route 601 bridge: A bridge containing the Strongwell 36 in. hybrid composite double web beam.” Ph.D. thesis Virginia Polytechnic Institute and State Univ. Blacksburg VA.
43. Wardenier J. · 2010
44. 10.1061/(ASCE)CC.1943-5614.000052710.1061/(ASCE)CC.1943-5614.0000527 ↗
45. Structural properties of space truss structure with CFRP
46. Zhao L. Burgueno R. Rovere H. L. Seible F. and Karbhari V. (2000). “Preliminary evaluation of the hybrid tube bridge system.” No. TR-2000/04 Dept. of Structural Engineering Univ. of California San Diego.