journal article·2007-04

Bonding Characteristics of Fiber-Reinforced Polymer Sheet-Concrete Interfaces under Dowel Load

Jianguo Dai, Tamon Ueda, Yasuhiko Sato

Publisher page

Abstract

Based on a series of experimental tests on notched concrete beams externally bonded with unidirectional fiber-reinforced polymer (FRP) sheets, this paper investigates the bond characteristics of FRP sheet-concrete interfaces under dowel load, which acts vertically on the FRP sheet and leads to a mix-mode interface peeling. The peeling properties of FRP sheet-concrete interfaces under the dowel load are evaluated in terms of their interface dowel load-carrying capacity, critical interface peeling angle, and interface peeling fracture energy. Experimental parameters include strength of concrete substrate, tension stiffness of FRP sheets, properties of bonding adhesives, concrete surface treatment methods, and length of precrack set between the FRP sheet and concrete substrate. Analytical models clarifying the relationships among the interface dowel load-carrying capacity, the interface peeling angle, and the interface peeling fracture energy are built up and also verified by test results. Further, this paper shows how to use the interface peeling fracture energy calibrated from the present dowel tests for the practical design of spalling prevention, which is now becoming a popular application of FRP sheets for the maintenance and repair of existing concrete structures in Japan.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Engineer, Life Cycle Management Research Center, Port and Airport Research Institute, Yokosuka 239-0826, Japan. E-mail: dai@pari.go.jp

Professor, Division of Built Environment, Hokkaido Univ., Sapporo, 060-8628, Japan. E-mail: ueda@eng.hokudai.ac.jp

Associate Professor, Division of Built Environment, Hokkaido Univ., Sapporo, 060-8628, Japan. E-mail: ysato@eng.hokudai.ac.jp

References (33)

Show source-provided references
1. 10.1061/(ASCE)1090-0268(1999)3:4(153)10.1061/(ASCE)1090-0268(1999)3:4(153) ↗
2. Brosens K. and Van Gemert D. (1999). “Anchorage design for externally bonded carbon fiber-reinforced polymer laminates.” ACI SP 188-56 Detroit 635–641.
3. 10.1016/S0950-0618(03)00094-110.1016/S0950-0618(03)00094-1 ↗
4. 10.1061/(ASCE)1090-0268(1998)2:3(138)10.1061/(ASCE)1090-0268(1998)2:3(138) ↗
5. The Cement Shibun · J. Concrete Technology on Concrete Spalling Prevention · 2002 · 21
6. The Cement Shibun · J. Concrete Technology on Concrete Spalling Prevention · 2005 · 24
7. Bond and force transfer of composite material plates bonded to concrete
8. 10.1061/(ASCE)0733-9445(2001)127:7(784)10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
9. 10.1016/S0950-0618(02)00091-010.1016/S0950-0618(02)00091-0 ↗
10. Mode I fracture behaviors of FRP-concrete interfaces
11. Dai J. G. Ueda T. Ozaki H. and Sato Y. (2003b). “Experimental study on the mix-mode fracture of FRP sheet-concrete interfaces.” Proc. JCI Int. Symp.: Latest Achievement in Technology and Research on Retrofitting Concrete Structures-Interface Mechanics and Structural Performance Kyoto Japan 113–120.
12. 10.1061/(ASCE)1090-0268(2005)9:1(52)10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
13. 10.3151/jact.4.13310.3151/jact.4.133 ↗
14. Bond of fiber-reinforced polymer laminates to concrete
15. Dos Santos A. C. Bittencourt T. N. and Gettu R. (2003). “Experimental analysis of interface between CFRP and concrete using cylindrical specimens.” Proc. FRPRCS-6 K. H. Tan ed. Singapore 183–182.10.1142/9789812704863_0014 ↗
16. FIB. (2001). “Externally bonded FRP reinforcement for RC structures.” Bulletin 14 TC Rep .
17. Kanakubo T. Furuta T. and Fukuyama H. (2003). “Bond strength between fiber-reinforced polymer laminates and concrete.” Proc. FRPRCS-6 K. H. Tan ed. Singapore 134–143.10.1142/9789812704863_0010 ↗
18. 10.1177/07316844960150020610.1177/073168449601500206 ↗
19. 10.1061/(ASCE)1090-0268(1998)2:4(195)10.1061/(ASCE)1090-0268(1998)2:4(195) ↗
20. Kojima Y. Yoshizawa K. Muguruma T. Kobayashi A. Wakana K. Asakura T. and Wu Z. S. (2004). “A design method of fiber-reinforced plastic methods as a countermeasure for concrete spalling from tunnel lining.” Proc. JSCE No.746/VI-62 101–116 (in Japanese).10.2208/jscej.2004.756_101 ↗
21. Maeda T. Asano Y. Sato Y. Ueda T. and Kakuta Y. (1997). “A study on bond mechanism of carbon fiber sheet.” Non-Metallic (FRP) Reinforcement for Concrete Structures Proc. 3rd Int. Symp. Sapporo Japan Vol. 1 279–286.
22. Miller B. and Nanni A. (1999). “Bond between CFRP sheets and concrete.” Proc. ASCE 5th Materials Congress L. C. Bank ed. ASCE Reston Va. 240–247.
23. Bond behavior between fiber-reinforced polymer laminates and concrete
24. Neubauer U. and Rostásy F. S. (1997). “Design aspects of concrete structures strengthened with externally bonded CFRP plates.” Proc. 7th Int. Conf. on Structural Faults and Repairs ECS Edinburg Scotland 2 109–118.
25. Fundamental study on bond mechanism of carbon fiber sheet
26. 10.1061/(ASCE)0733-9445(2001)127:7(792)10.1061/(ASCE)0733-9445(2001)127:7(792) ↗
27. 10.1016/S0141-0296(01)00105-510.1016/S0141-0296(01)00105-5 ↗
28. 10.1016/S0143-7496(97)00018-310.1016/S0143-7496(97)00018-3 ↗
29. 10.1016/S0950-0618(03)00043-610.1016/S0950-0618(03)00043-6 ↗
30. Triantafillou T. C. (1999). “Guidelines for the dimensioning of reinforced concrete elements strengthened with Sika Carbondur/Sikawrap.” Univ. of Patras Patras Greece.
31. Experimental and analytical studies on peeling behaviors and spalling resistance effect of externally bonded continuous fiber sheets
32. Experimental study on FRP-to-concrete bonded joints
33. Yoshizawa K. (2002). “Design method for tunnel lining retrofitted with externally bonded FRP sheets.” Technical presentation of Japan Railway Technical Research Institute No. 153 (in Japanese).