journal article·2013-12Open access

FRP-Balsa Composite Sandwich Bridge Deck with Complex Core Assembly

Michael Osei-Antwi, Julia de Castro, Anastasios P. Vassilopoulos, Thomas Keller

Abstract

The aim of this work was to investigate to what extent the performance of a glass fiber–reinforced polymer (GFRP) sandwich slab-bridge with a uniform high-density balsa core could be improved in terms of structural efficiency and weight by using a more complex core assembly. This core consisted of high-density and low-density balsa and a fiber-reinforced polymer (FRP) arch inserted into the balsa high/low density interface. Quasi-static load-bearing experiments on sandwich arch-beams with complex core assemblies under symmetric four-point and asymmetric three-point loading were performed. The FRP arch reduced the force in the upper face sheet in the mid-span region and thus prevented compression failure of the latter, which led to a higher ultimate load. It also contributed to the shear resistance by up to 20% for symmetric loading. The best overall performance in terms of structural efficiency (stiffness and resistance) and weight resulted from a core configuration with a GFRP arch between an upper high-density and lower low-density balsa core.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Ph.D. Student, Composite Construction Laboratory, Ecole Polytechnique Fédérale de Lausanne, Station 16, CH-1015 Lausanne, Switzerland.

Scientist and Lecturer, Composite Construction Laboratory, Ecole Polytechnique Fédérale de Lausanne, Station 16, CH-1015 Lausanne, Switzerland.

Research and Teaching Associate, Composite Construction Laboratory, Ecole Polytechnique Fédérale de Lausanne, Station 16, CH-1015 Lausanne, Switzerland.

Professor and Director, Composite Construction Laboratory, Ecole Polytechnique Fédérale de Lausanne, Station 16, CH-1015 Lausanne, Switzerland (corresponding author).

References (27)

Show source-provided references
1. Alcan Baltek Corporation. (2001). “Data sheet.” Mechanical properties vs. density and grain orientation for balsa wood Northvale NJ.
2. 10.1061/(ASCE)1090-0268(2002)6:2(73)10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
3. 10.1016/S0266-3538(03)00294-X10.1016/S0266-3538(03)00294-X ↗
4. Chevalier J. L. (1992). “Creeps and fatigue properties of end-grain balsa and other typical sandwich cores.” Sandwich Constructions 2 Proc. 2nd Int. Conf. on Sandwich Constructions Gainesville FL 519–539.
5. 10.1016/S0263-8223(03)00040-010.1016/S0263-8223(03)00040-0 ↗
6. Fireco. (2003). “Bascule FRP composite footbridge bridge.” 〈http://www.fireco.no/references/Gangbru%20Vesterelven.pdf〉 (Jun. 12 2013).
7. Gay D. · 2007 · 29
8. 10.1002/pse.6610.1002/pse.66 ↗
9. 10.1016/j.compositesa.2006.07.00710.1016/j.compositesa.2006.07.007 ↗
10. 10.1016/j.compstruct.2003.08.01110.1016/j.compstruct.2003.08.011 ↗
11. Keller T. Rothe J. de Castro J. and Osei-Antwi M. (2013). “GFRP-balsa sandwich bridge deck—Concept design and experimental validation.” J. Compos. Constr. 10.1061/(ASCE)CC.1943-5614.0000423.JCCOF21090-026810.1061/(ASCE)CC.1943-5614.0000423 ↗
12. 10.1016/j.compscitech.2010.10.00210.1016/j.compscitech.2010.10.002 ↗
13. Engineered sandwich cores: vehicular bridge deck applications
14. 10.1016/S0263-8223(98)00095-610.1016/S0263-8223(98)00095-6 ↗
15. 10.1016/j.matdes.2005.06.02310.1016/j.matdes.2005.06.023 ↗
16. 10.1016/j.conbuildmat.2012.11.00910.1016/j.conbuildmat.2012.11.009 ↗
17. 10.1061/(ASCE)1090-0268(2004)8:1(33)10.1061/(ASCE)1090-0268(2004)8:1(33) ↗
18. 10.1061/(ASCE)1090-0268(2008)12:3(344)10.1061/(ASCE)1090-0268(2008)12:3(344) ↗
19. Sicomin Epoxy Systems. (2004). “Data sheet.” SR 1710 inj/SD 78720 France 1–4.
20. Swiss Composites Suter Kunststoffe AG. (2010). “Data sheet.” Basalt- Fasern und Gewbe Kohlenstoff-Fasern Switzerland 1–5.
21. Telang N. M. Dumlao C. Mehrabi A. B. Ciolko A. T. and Gutierrez J. (2006). “Field inspection of in-service FRP bridge decks.” NCHRP (TRB)-4 report 564-Appendix 4.
22. 10.2749/10168661079355766310.2749/101686610793557663 ↗
23. Verheus A. (2012). “The Utrecht bridge: A 100% composite box beam design.” FRP bridges Proc. Int. Conf. on FRP bridges London 154–165.
24. Zenkert D. · 1995 · 107
25. 10.1016/j.compstruct.2007.10.01510.1016/j.compstruct.2007.10.015 ↗
26. Zihong L. (2007). “Testing and analysis of a fiber reinforced polymer deck.” Ph.D. thesis Virginia Tech Blacksburg VA.
27. Zureick A. (1997). “Fiber reinforced polymer bridge decks.” Proc. National Seminar on Advanced Composite Material Bridges Federal Highway Administration Washington DC.