Finite-Element Analysis of FRP-Reinforced Concrete Slab–Column Edge Connections Subjected to Reversed-Cyclic Lateral Loads
Source abstract
Abstract
A series of finite-element analyses for slab–column edge connections reinforced with fiber-reinforced polymer (FRP) reinforcement and subjected to reversed-cyclic lateral load is conducted and discussed. A three-dimensional nonlinear finite-element model (FEM) is constructed using a commercially available software. The FEM is validated against the results of experimental studies conducted previously by the authors. Subsequently, the validated FEM is used to carry out an extensive parametric study investigating the influence of key parameters including the gravity shear ratio (0.2–0.8), flexural reinforcement type [glass and carbon FRP (GFRP and CFRP, respectively)], column aspect ratio (0.25–4.00), flexural reinforcement ratio (0.7%–1.4%), and slab thickness (150–400 mm). The results showed that the drift capacity of edge connections reinforced with either GFRP or CFRP reinforcement is reduced when the applied gravity shear ratio increases. However, GFRP-reinforced concrete (RC) connections were able to undergo larger drift ratios than their CFRP-RC counterparts. In addition, increasing the slab thickness reduced the punching shear strength of GFRP-RC connections, even for slabs with an effective depth less than 300 mm.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Ph.D. Candidate, Dept. of Civil Engineering, Univ. of Manitoba, Winnipeg, MB, Canada R3T 5V6. ORCID: .
Professor, Dept. of Civil Engineering, Univ. of Manitoba, Winnipeg, MB, Canada R3T 5V6 (corresponding author). ORCID: .
References (49)
Show source-provided references
1. ACI (American Concrete Institute) · 2019
2. ACI (American Concrete Institute) · 2019
3. 10.1061/(ASCE)ST.1943-541X.000119710.1061/(ASCE)ST.1943-541X.0001197 ↗
4. 10.1061/(ASCE)CC.1943-5614.000016110.1061/(ASCE)CC.1943-5614.0000161 ↗
5. Edge–column slab connections under gravity and lateral loading
6. 10.1061/(ASCE)CC.1943-5614.000100210.1061/(ASCE)CC.1943-5614.0001002 ↗
7. 10.1061/(ASCE)CC.1943-5614.000071110.1061/(ASCE)CC.1943-5614.0000711 ↗
8. Size effect in punching shear failure of slabs
9. 10.1061/(ASCE)CC.1943-5614.000010810.1061/(ASCE)CC.1943-5614.0000108 ↗
10. CEB (Comité Euro-International du Béton) · 1993
11. Červenka V. · 2020
12. CSA (Canadian Standard Association) · 2017
13. CSA (Canadian Standards Association) · 2019
14. 10.14359/5170111010.14359/51701110 ↗
15. Punching shear behavior of two-way flat concrete slabs reinforced with GFRP bars
16. 10.14359/5171680310.14359/51716803 ↗
17. 10.1016/j.engstruct.2019.10997810.1016/j.engstruct.2019.109978 ↗
18. 10.1061/(ASCE)CC.1943-5614.000066810.1061/(ASCE)CC.1943-5614.0000668 ↗
19. Punching shear behavior of GFRP-RC slab–column edge connections
20. Lateral displacement deformability of GFRP-RC slab–column edge connections
21. 10.1016/j.engstruct.2019.10970310.1016/j.engstruct.2019.109703 ↗
22. 10.1061/(ASCE)CC.1943-5614.000100010.1061/(ASCE)CC.1943-5614.0001000 ↗
23. Gravity load effect on seismic response of GFRP-RC slab–column edge connections
24. 10.1061/(ASCE)CC.1943-5614.000105410.1061/(ASCE)CC.1943-5614.0001054 ↗
25. 10.1061/(ASCE)CC.1943-5614.000040310.1061/(ASCE)CC.1943-5614.0000403 ↗
26. 10.1139/cjce-2012-050910.1139/cjce-2012-0509 ↗
27. Seismic response of slab–column connections constructed with high-strength concrete
28. Punching of flat plates under static and dynamic horizontal forces
29. 10.1061/(ASCE)CC.1943-5614.000085810.1061/(ASCE)CC.1943-5614.0000858 ↗
30. 10.3390/fib304041110.3390/fib3040411 ↗
31. 10.1061/(ASCE)CC.1943-5614.000059710.1061/(ASCE)CC.1943-5614.0000597 ↗
32. 10.1061/(ASCE)CC.1943-5614.000043710.1061/(ASCE)CC.1943-5614.0000437 ↗
33. How safe are our large reinforced concrete beams?
34. 10.1061/(ASCE)CC.1943-5614.000058310.1061/(ASCE)CC.1943-5614.0000583 ↗
35. Cyclic loading of high-strength lightweight concrete slabs
36. 10.1061/(ASCE)1090-0268(2000)4:3(154)10.1061/(ASCE)1090-0268(2000)4:3(154) ↗
37. Menegotto M. · 1973 · 15
38. Punching of two-way concrete slabs with fiber–reinforced polymer reinforcing bars or grids
39. Lateral displacement ductility of reinforced concrete flat plates
40. Punching shear of thick plates with and without shear reinforcement
41. Cyclic lateral loading of nonductile slab–column connections
42. 10.14359/5171675710.14359/51716757 ↗
43. 10.1061/(ASCE)ST.1943-541X.000259310.1061/(ASCE)ST.1943-541X.0002593 ↗
44. 10.1016/j.conbuildmat.2018.08.06410.1016/j.conbuildmat.2018.08.064 ↗
45. Sozen M. · 1980 · 119
46. Punching shear strength of slabs with openings and supported on rectangular columns
47. 10.1007/BF0247203410.1007/BF02472034 ↗
48. Modified compression-field theory for reinforced concrete beams subjected to shear
49. Zaghloul A. 2007. “Punching shear strength of interior and edge column–slab connections in CFRP reinforced flat plate structures transferring shear and moment.” Ph.D. thesis Dept. of Civil and Environmental Engineering Carleton Univ.