journal article·2005-08

Strength-Fatigue Behavior of Fiber Reinforced Polymer Strengthened Prestressed Concrete T-Beams

Kyle H. Larson, Robert J. Peterman, Hayder A. Rasheed

Publisher page

Abstract

Strengthening concrete girders with fiber-reinforced polymers (FRP) is becoming an increasingly common practice as more research investigations are favorably qualifying the technique. However, important behavioral aspects, such as fatigue in prestressed concrete beams, are yet to be adequately evaluated. An experimental program was conducted to test five pretensioned, prestressed concrete T beams designed for specific prestressing strand stress ranges under live-load conditions. The experimental testing consisted of precracking the beams, strengthening them with carbon FRP, and mechanically loading them to study the effect of increasing the live load on strand fatigue. The beams were either loaded monotonically to ultimate capacity or cyclically fatigued and then loaded monotonically to failure. All the beams were monotonically loaded past their cracking moment at midspan prior to strengthening, to simulate girders in the field. Beam 1 was tested as a control specimen under static loading up to failure. Beams 2 and 3 were strengthened with carbon FRP to have a design stress range of 124 MPa (18 ksi) under service load condition. Beams 4 and 5 were strengthened to have a higher stress range of 248 MPa (36 ksi). For all the strengthened beams, the failure mode observed was FRP rupture. The results favorably qualify the application of FRP strengthening to increase the live load of concrete beams prestressed with straight strands.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Research Assistant, Dept. of Civil Engineering, Kansas State Univ., Manhattan, KS 66506.

Associate Professor, Dept. of Civil Engineering, Kansas State Univ., Manhattan, KS 66506.

Assistant Professor, Dept. of Civil Engineering, Kansas State Univ., Manhattan, KS 66506.

References (13)

Show source-provided references
1. American Association of State Highway Transportation Officials (AASHTO). (1998). LRFD bridge design specifications 2nd Ed. Washington D.C.
2. American Concrete Institute (ACI). (2002). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2R02 ACI Committee 440 Farmington Mills Mich.
3. 10.1061/(ASCE)1090-0268(2002)6:2(73)10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
4. 10.15554/pcij.01012002.76.9310.15554/pcij.01012002.76.93 ↗
5. ISIS Canada · 2001
6. Larson K. H. (2003). “Behavior of FRP strengthened reinforced and prestressed concrete girders in flexure shear and delamination.” MS thesis Kansas State Univ. Manhattan Kan. 164.
7. Larson K. H. Rasheed H. A. and Peterman R. J. (2004). “Developing a nonlinear strength-fatigue design procedure for FRP strengthening of prestressed concrete girders.” Proc. 17th Engineering Mechanics Conf. ASCE Reston Va. CD ROM.
8. M-Brace · 1998
9. 10.1016/0301-4215(87)90120-010.1016/0301-4215(87)90120-0 ↗
10. Precast/Prestressed Concrete Institute · 1999
11. Reed C. (2002). “Strengthening of 30 year old prestressed concrete bridge girders with carbon fiber reinforced polymers.” MS thesis Kansas State Univ. Manhattan Kan.
12. 10.1061/(ASCE)1084-0702(2004)9:2(185)10.1061/(ASCE)1084-0702(2004)9:2(185) ↗
13. Reed C. E. Peterman R. J. and Rasheed H. A. (2004). “Evaluating FRP repair method for cracked prestressed concrete bridge members subjected to repeated loadings (Phase 1).” Final Rep. No. K-TRAN: KSU 01-02 Kansas Dept. of Transportation Topeka Kan.