Performance Evaluation of Reinforced Concrete Bridge Columns Wrapped with Fiber Reinforced Polymers
Source abstract
Abstract
This study investigates the performance of new bridge columns wrapped with fiber reinforced polymers (FRP) when exposed to aggressive environmental conditions. This has been accomplished through field monitoring and laboratory tests. As part of the field monitoring, temperature data were collected at various locations of bridge columns. In addition, visual inspection of two bridges was performed periodically for over a period of two years. No evidence of deterioration of the FRP wraps was detected during that period. Laboratory tests were performed to investigate how FRP wraps protect reinforced concrete columns from corrosion, and freeze–thaw laboratory tests were conducted to study the impact of temperature cycles on the mechanical behavior of FRP-wrapped columns. From the corrosion experimental tests, it was found that FRP provides excellent protection against aggressive agents (salty water or moisture) even when a single layer is used. Compression tests were conducted on specimens subjected to freeze–thaw cycles. It was found that minor thermal cycles have no effect on the performance of FRP-wrapped concrete specimens. However, for large thermal cycles, some degradation of ductility in the axial and the hoop directions was observed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Project Engineer, RQAW Corporation, 4755 Kingsway Dr., Suite 400, Indianapolis, IN 46205.
Associate Professor, School of Civil Engineering, Purdue Univ., West Lafayette, IN 47907.
Dean, College of Engineering, Univ., of Hawaii, Holmes Hall 240, 2540 Dole St., Honolulu, HI 96822.
References (16)
Show source-provided references
1. Bentur A. Diamond S. and Berke N. S. (1997). Steel corrosion in concrete: Fundamentals and civil engineering practice . E&FN SPON London 201.10.1201/9781482271898 ↗
2. Broomfield J. P. (1997). Corrosion of steel in concrete: Understanding investigation and repair . E & FN SPON London.10.4324/9780203414606 ↗
3. Broomfield J. P. Rodriguez J. Ortega L. M. and Garcia A. M. (1993). “Corrosion rate measurement and life prediction for reinforced concrete structures.” Proc. 5th Conf. Structural Faults and Repair M. C. Forde ed. Engineering Technics Press 2 155–163.
4. 10.1139/cjce-26-2-22610.1139/cjce-26-2-226 ↗
5. 10.1061/(ASCE)0887-381X(1994)8:3(73)10.1061/(ASCE)0887-381X(1994)8:3(73) ↗
6. 10.1520/CTR10472J10.1520/CTR10472J ↗
7. 10.1061/(ASCE)1090-0268(2000)4:4(191)10.1061/(ASCE)1090-0268(2000)4:4(191) ↗
8. Lan Y. M. Sotelino E. D. and Chen W. F. (1998). “State-of-the-art review of highway bridge columns retrofitted with FRP jackets.” Structural Engineering Rep. No. CE-STR-98-5 School of Civil Engineering Purdue Univ. West Lafayette Ind.
9. Monitoring the corrosion of reinforcing steel.
10. Mehta P. K. and Monteiro P. J. M. (1993). Concrete: Microstructure properties and materials . 2nd Ed. Prentice-Hall New Jersey.
11. Effect of extended freeze–thaw exposure on composite wrapped concrete cylinders
12. Soudki K. A. and Green M. F. (1996). “Performance of CFRP Retrofitted Concrete Columns at Low Temperatures ” Proc. 2nd Int. Conf. on Advanced Composite Materials in Bridges and Structures Montreal 11–14 August 427–434.
13. Freeze–thaw response of CFRP wrapped concrete.
14. 10.1061/(ASCE)0899-1561(1998)10:1(52)10.1061/(ASCE)0899-1561(1998)10:1(52) ↗
15. Vassie P. R. (1989). “A survey of site tests for the assessment of corrosion in reinforced concrete.” Transport Research Laboratory Rep. L. R. No. 953 U.K.
16. Woods H. (1968). “Durability of concrete construction.” ACI and The Iowa State University Press ACI Detroit.