journal article·2007-10

Constitutive Model for Time-Dependent Behavior of FRP–Concrete Interface

Zhishen Wu, Hesham Diab

Publisher page

Abstract

A fundamental understanding of fiber-reinforced polymer (FRP) laminate bonding behavior, including bond strength and effective bonding length, is of primary importance for the development of design guidelines and codes for concrete structures strengthened with externally bonded FRP reinforcement as a bond-critical application. However, the long-term serviceability of such FRP-strengthened structures is still a concern due to a lack of both long-term performance data and a suitable model to represent these performances. This study aims at presenting a viscoelastic model describing the time-dependent behavior of the FRP–concrete interface. The proposed model has been calibrated using strain measurements of the designed specimen for the experimental investigation of the time-dependent behavior of the FRP–concrete interface, including the development of the effective bonding length. Afterward, the proposed model satisfactorily predicts the time-dependent bonding length of the FRP sheet in comparison with the experimental results. The effects, both of creep of the adhesive layer and of creep and shrinkage of the concrete, on the changes in the effective bonding length of the PFRP sheet are also discussed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Professor, Dept. of Urban and Civil Engineering, Ibaraki Univ., Ibaraki 316-8511, Japan. E-mail: zwu@mx.ibaraki.ac.jp

Ph.D. Candidate, Ibaraki Univ., Ibaraki 316-8511, Japan. E-mail: heshamdiab2@yahoo.com

References (29)

Show source-provided references
1. Aboudi J. · 1991
2. American Concrete Institute (ACI). (2002). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures ACI 440.2R-02 Redford Station Detroit.
3. Australian Standards (AS). (2001). “Concrete structures.” AS 3600 Standard Association of Australia Australia.
4. Băzant Z. P. (1971). “Numerical stable algorithm with increasing time steps for integral type ageing creep.” Proc. 1st Int. Conf. on Structural Mechanics in Reactor Technology 3 paper H2/3.
5. Băzant Z. P. · 1988
6. 10.1016/S0008-8846(01)00723-210.1016/S0008-8846(01)00723-2 ↗
7. Băzant Z. P. and Wu S. T. (1974). “Rate-type creep law of aging concrete based on Maxwell chain.” Materials and Structures Research and Testing 7(37) 45–59.10.1007/BF02482679 ↗
8. Borchert K. and Zilch K. (2005). “Time dependent thermo mechanical bond behavior of epoxy bonded prestressed FRP-reinforcement.” Proc. 7th Int. Symp on Fiber Reinforcement Polymer Reinforcement for Concrete Structures (FRPRCS-7) 671–683.
9. Comitê Euro-International du Beton (CEB). (1993). CEB-FIP model code 1990 Thomas Telford London.
10. Diab H. M. Wu Z. S. and Ahmed E. (2005). “Analytical study on long-term deflections of beams strengthened by prestressed FRP sheets.” Proc. Int. Symp. on Innovation and Sustainability of Structures in Civil Engineering Southeast Univ. China 1886–1899.
11. 2004
12. Ferrier E. and Hamelin P. (1999). “Influence of time-temperature loading on carbon epoxy reinforcement for concrete structure.” SP-188-44 ACI 491–500.
13. 10.1016/0008-8846(76)90007-710.1016/0008-8846(76)90007-7 ↗
14. Japan Society of Civil Engineers (JSCE). (1996). “Standard specifications for design and construction of concrete structures (Design).” Japan.
15. Japan Society of Civil Engineers · 2001
16. Kamiharako A. Shimomura T. Maruyrama K. and Nishida H. (1999). “Stress transfer and peeling-off behavior of continuous fiber reinforced sheet-concrete system.” Proc. 7th East Asia-Pacific Conf. on Structural Engineering and Construction EASEC-7 Kochi Univ. of Technology Kochi Japan 1283–1288.
17. Viscoelastic properties of resin for IC plastic packages and residual stress
18. Klamer E. L. Hordijk D. A. and Janssen H. J. (2005). “The influence of temperature on the debonding of externally bonded CFRP.” Proc. 7th Int. Symp on Fiber Reinforcement Polymer Reinforcement for Concrete Structures (FRPRCS-7) 1551–1570.
19. Masia M. J. Shrive N. G. and Shrive P. L. (2003). “Creep performance of reinforced concrete beams strengthened with externally bonded FRP sheets.” Proc. Int. Conf. on Performance of Construction Materials in the New Millennium: A New Era of Building Cairo Egypt.
20. Transfer and development length of carbon fiber reinforced polymers prestressing reinforcement
21. 10.1061/(ASCE)1090-0268(2005)9:3(203)10.1061/(ASCE)1090-0268(2005)9:3(203) ↗
22. 10.1061/(ASCE)0733-9445(1994)120:3(1016)10.1061/(ASCE)0733-9445(1994)120:3(1016) ↗
23. Bond of aramid composite bars in concrete after exposure to temperature cycles
24. Shear transfer along FRP–concrete interface in flexural members
25. Hybridization of continuous fiber sheets as structural composites
26. 10.1177/07316844990180120710.1177/073168449901801207 ↗
27. 10.1061/(ASCE)0733-9399(2002)128:5(562)10.1061/(ASCE)0733-9399(2002)128:5(562) ↗
28. Study on FRP–concrete interface bond performance
29. 10.1061/(ASCE)1090-0268(2003)7:1(10)10.1061/(ASCE)1090-0268(2003)7:1(10) ↗