Environmental Impact of Steel and Fiber–Reinforced Polymer Reinforced Pavements
Source abstract
Abstract
The environmental load of fiber-reinforced polymer (FRP) reinforced pavement was compared with that of steel reinforced pavement. Replacing steel rebars with FRP rebars can lead to changes in the concrete mix and pavement structure at the erection stage, to a reduced need for maintenance activities related to steel corrosion, and to different recycling opportunities at the disposal stage. The current study examined all of these variables. The environmental load of FRP reinforced pavement was found to be significantly lower than that of steel reinforced pavement. This results mainly from the fact that FRP reinforced pavement requires less maintenance, its cement content and concrete cover over reinforcement can be reduced, and the reinforcement itself generates a smaller environmental load.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Building Research Institute, Faculty of Civil and Environmental Engineering, Technion—Israel Institute of Technology, Haifa 32000, Israel. E-mail: akatz@technion.ac.il
References (28)
Show source-provided references
1. American Concrete Institute. (ACI) (2001). “Guide for the design and construction of concrete reinforced with FRP bars.” 440.1R-01 Farmington Hills Mich.
2. The effect of material degradation on bond properties of FRP reinfocing bars in concrete
3. 10.1061/(ASCE)1090-0268(2002)6:3(143)10.1061/(ASCE)1090-0268(2002)6:3(143) ↗
4. CEN European Committee for Standardization. ( 1999). “Design of concrete structures—Part 1: General rules and rules for buildings.” Eurocode 2 preEN 1999-1 Brussels Belgium.
5. CEN European Committee for Standardization. ( 2000). “Concrete—Part 1: Specification performance production and conformity.” EN 206 Brussels Belgium.
6. 10.1016/S0143-974X(98)00074-110.1016/S0143-974X(98)00074-1 ↗
7. 10.1061/(ASCE)1076-0342(1997)3:4(129)10.1061/(ASCE)1076-0342(1997)3:4(129) ↗
8. 10.1061/(ASCE)0899-1561(1999)11:3(224)10.1061/(ASCE)0899-1561(1999)11:3(224) ↗
9. Ehlen M. A. and Marshall H. E. (1996). “The economics of new technology materials: A case study of FRP bridge decking.” NISTIR 5864 National Institute of Standard and Technology Gaithersburg Md.10.6028/NIST.IR.5864 ↗
10. Florida Dept. of Transportation (FDOT). (2002). “Structures design guidelines for load and resistance factor design.” Tallahassee Fla.
11. Goedkoop M. and Spriensma R. (2000). “The eco-indicator 99 a damage oriented method for life cycle impact assessment methodology report.” Pré Consultants Amersfoort 〈www.pre.nl〉.
12. Horvath A. and Hendrickson C. (1998). “Comparison of environmental implications of asphalt and steel reinforced concrete pavement.” Transp. Res. Rec. 1626 Transportation Research Board Washington D.C. 105–113.10.3141/1626-13 ↗
13. International Organization of Standardization (ISO). (1997). “Environmental management—life cycle assessment—principles and framework.” 14040 Switzerland.
14. International Organization of Standardization (ISO). (1998). “Environmental management—life cycle assessment—goal and scope definition and inventory analysis.” 14041 Switzerland.
15. International Organization of Standardization (ISO). (2000). “Environmental management—life cycle assessment—life cycle impact assessment.” 14042 Switzerland.
16. International Organization of Standardization (ISO). (2000b). “Environmental management—life cycle assessment—life cycle interpretation.” 14043 Switzerland.
17. 10.1016/S0008-8846(02)01033-510.1016/S0008-8846(02)01033-5 ↗
18. Katz A. Bank L. C. and Puterman M. (2001). “Durability of FRP rebars after four years of exposure.” Fiber reinforced plastics for reinforced concrete structures-FRPRCS-5 C. J. Burgoyne ed. Thomas Telford London 497–503.
19. Kibert C.K. Chini S.A. and Muszynski L.C. (1998). “Environmental issues of composite building materials.” Proc. Second Int. Conf. on Composite Materials in Infrastructure ICCI ’98 H. Saadamenesh ed. Tucson.
20. Mueller A. and Winkler A. (1998). “Characteristics of processed concrete rubble.” Proc. Sustainable Construction: Use of Recycled Concrete Aggregate N. A. Henherson and M. C. Limbachiya eds. Thomas Telford London 109–119.
21. Nanni A. Bakis C.E. and Mathew J.A. (1998). “Acceleration of FRP bond degradation.” Proc. Durability of Fiber Reinforced Polymer (FRP) Composites for Construction B. Benmokrane and H. Rahman eds. Univ. of Sherbrooke Canada 45–56.
22. 10.1061/(ASCE)0742-597X(2003)19:1(2)10.1061/(ASCE)0742-597X(2003)19:1(2) ↗
23. 10.1061/(ASCE)1090-0268(2000)4:4(182)10.1061/(ASCE)1090-0268(2000)4:4(182) ↗
24. 10.1061/(ASCE)1090-0268(2002)6:3(154)10.1061/(ASCE)1090-0268(2002)6:3(154) ↗
25. RILEM 121-DRG (1994). “Specification for concrete with recycled aggregates.” Mater. Struct. 27 557–559.8olMASTED1359-599710.1007/BF02473217 ↗
26. Strengths of recycled aggregate concrete made using field-demolished concrete as aggregate
27. Uomoto T. and Ohga H. (1996). “Performance of fiber reinforced plastics for construction reinforcement.” Proc. Advanced Composite Materials in Bridges and Structures H. H. El-Brady et al. eds. Canadian Society for Civil Engineers Montreal 125–132.
28. 10.1016/S0143-974X(98)80031-X10.1016/S0143-974X(98)80031-X ↗