journal article·2005-06

Peeling Behavior and Spalling Resistance of Bonded Bidirectional Fiber Reinforced Polymer Sheets

Zhishen Wu, Hong Yuan, Toshihiro Asakura, Hiroyuki Yoshizawa, Akira Kobayashi, Yoshiyuk Kojima, Ehsan Ahmed

Publisher page

Abstract

This paper presents the peeling behavior and spalling resistant effect of bidirectional fiber reinforced polymer (FRP) sheets externally bonded to concrete surfaces. Experimental investigations are carried out through a series of newly designed punching-peeling tests. A wide range of variables, such as FRP sheet layers and fiber direction, plate constraint, concrete strength, adhesives, bond length of FRP sheets, diameter of indenter, and types of fibers, are considered in the experimental investigation. Theoretical study is also conducted for the specimens. Interfacial fracture energy is calculated analytically using a membrane-peeling method. It is realized that only two material parameters, i.e., the interfacial fracture energy of the FRP-concrete interface and the tensile stiffness of FRP sheets, are necessary to represent the interfacial spalling resistant behavior. Finally, the theoretical results are validated by comparing with experimental results. Comparison of theoretical to experimental results shows that the proposed theoretical model is satisfactory in reasonably and accurately predicting the peeling behavior and spalling resistant capacity of bidirectional FRP sheets bonded to concrete surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Professor, Dept. of Urban and Civil Engineering, Ibaraki Univ., Nakanarusawa 4-12-1, Hitachi 316-8511, Japan.

Professor, Dept. of Mechanics and Civil Engineering, Jinan Univ., Guangzhou 510632, P. R. China.

Professor, Dept. of Earth Resources Engineering, Kyoto Univ., Kyoto City, 606-8501, Japan.

Nippon Steel Composites Co., Ltd., Nihonbashukobuna-cho Cho-ku 3-8, Tokyo 103-0024, Japan.

References (20)

Show source-provided references
1. Binici B. and Bayrak O. (2002). “Strengthening reinforced concrete flat plates using fiber reinforced polymer.” Proc. 10th U.S.–Japan Conf. on Composite Materials Calif. 377–386.
2. Brosens K. and Gemert D. V. (1998). “Plate end shear design for external CFRP laminates fracture mechanics of concrete structures.” Proc. FRAMCOS-3 Aedificatio Freiburg Germany 1793–1804.
3. 10.1080/0021846750807504110.1080/00218467508075041 ↗
4. 10.1177/07316844960150020610.1177/073168449601500206 ↗
5. Kimpara I. Kageyama K. Suzuki T. Ohsawa I. and Yamaguchi K. (1998). “Characterization of peeling strength of FRP sheets bonded on mortar and concrete.” Proc. 8th Japan–U.S. Conf. on Composite Materials 1010–1019.10.1201/9780367812720-102 ↗
6. Peel mechanics with large bending10.1007/BF00040144 ↗
7. Ozbolt J. and Eligehausen R. (2001). “Punching failure-influence of material properties and size effect.” Proc. 4th Int. Conf. Fracture Mechanics of Concrete and Concrete Structures Tokyo 719–725.
8. 10.1007/BF0001316110.1007/BF00013161 ↗
9. 10.1080/0021846920803045410.1080/00218469208030454 ↗
10. Triantafillou T. C. (1998). “Fracture mechanics approaches to concrete strengthening using FRP materials.” Proc. FRAMCOS-3 Aedificatio Freiburg Germany 1761–1770.
11. Wang J. W. and Tan K. H. (2001). “Punching shear behaviour of RC flat slabs externally strengthened with CFRP system.” Proc. FRPRCS-5 Cambridge University Press Cambridge U.K. 997–1005.
12. Wu Z. S. Asakura T. Yoshizawa H. Yuan H. Kobayashi A. and Takahashi T. (2001b). “Experimental and analytical studies on peeling behavior and spalling resistance effect of CFS bonded to concrete.” Proc. 10th Int. Conf. on Fracture. 18.1.4 705.
13. Study on debonding failure load of RC beams strengthened with FRP sheets
14. Shear transfer along FRP-concrete interface in flexural members
15. 10.1061/(ASCE)0733-9399(2002)128:5(562)10.1061/(ASCE)0733-9399(2002)128:5(562) ↗
16. Wu Z. S. · 2001 · 133
17. 10.1177/07316844990180120710.1177/073168449901801207 ↗
18. 10.1016/j.engstruct.2003.11.00610.1016/j.engstruct.2003.11.006 ↗
19. Energy release rates for interfacial crack in laminated structures
20. Theoretical solutions on interfacial stress transfer of externally bonded steel/composite laminates