Durability and Failure Modes of Concrete Beams Strengthened with Polyurethane or Epoxy CFRP
Source abstract
Abstract
Externally bonded carbon-fiber-reinforced polymer (CFRP) composites are increasingly being used for repair of concrete infrastructure. Both the mechanical performance and the long-term durability of such a repair have resulted in a significant body of research. However, polyurethane-based composites for concrete repair have seen only limited treatment to date. This paper investigates the effect of seven different environments on the durability and failure modes of two different wet lay-up CFRP systems applied to flexural reinforcement of concrete: a two-part epoxy and a preimpregnated, water catalyzed polyurethane with aromatic chemistry as a matrix. Durability of concrete, CFRP laminates, and small-scale CFRP-strengthened concrete flexural beams was investigated for each duration (125, 250, and 365 days) and accelerated conditioning environment. Inverse analysis with a numerical model was used to develop conditioned bond–slip models for each composite system. Results and failure modes of control and conditioned specimens showed that degradation of CFRP-strengthened beams was controlled by the conditioned concrete tensile strength and bond cohesive energy in the epoxy and polyurethane systems, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Lecturer, Roads and Transport Engineering, Univ. of Al-Qadisiyah, Al-Diwaniyah 58001, Iraq (corresponding author).
Professor, Civil, Environmental, and Construction Engineering, Univ. of Central Florida, Orlando, FL 32816-2450. ORCID: .
References (46)
Show source-provided references
1. Abanilla, M. A., Y. Li, and V. M. Karbhari. 2006. “Durability characterization of wet layup graphite/epoxy composites used in external strengthening.” Composites, Part B 37 (2): 200–212.
2. ACI (American Concrete Institute). 2013. Specification for carbon and glass fiber-reinforced polymer materials made by wet layup for external strengthening. ACI 440.8-13. Farmington Hills, MI: ACI.
3. ACI (American Concrete Institute). 2017. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R-17. Farmington Hills, MI: ACI.
4. ACI (American Concrete Institute). 2019. Building code requirements for structural concrete. ACI-318. Farmington Hills, MI: ACI.
5. Al-Jelawy H. 2013. “Experimental and numerical investigations on bond durability of CFRP strengthened concrete members subjected to environmental exposure.” M.S. thesis Univ. of Central Florida.
6. 10.1061/(ASCE)CC.1943-5614.000103310.1061/(ASCE)CC.1943-5614.0001033 ↗
7. 10.1061/(ASCE)CC.1943-5614.000091610.1061/(ASCE)CC.1943-5614.0000916 ↗
8. 10.1016/j.conbuildmat.2014.07.03910.1016/j.conbuildmat.2014.07.039 ↗
9. ASTM. 2016. Standard test method for flexural strength of concrete (using simple beam with third-point loading). ASTM C78. West Conshohocken, PA: ASTM.
10. ASTM. 2017a. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39. West Conshohocken, PA: ASTM.
11. ASTM. 2017b. Standard test method for tensile properties of polymer matrix composite materials. ASTM D7565. West Conshohocken, PA: ASTM.
12. 10.1016/j.compstruct.2017.04.01510.1016/j.compstruct.2017.04.015 ↗
13. Bazant, Z. P., and P. C. Prat. 1988. “Effect of temperature and humidity on fracture energy of concrete.” ACI Mater. J. 85 (4): 262–271.
14. Bazinet, S., L. Cereone, and F. Worth. 2003. “Composite FRP moves into underwater repair applications.” SAMPE J. 39 (3): 8–16.
15. 10.1016/j.conbuildmat.2013.06.07710.1016/j.conbuildmat.2013.06.077 ↗
16. 10.1016/j.conbuildmat.2013.09.04910.1016/j.conbuildmat.2013.09.049 ↗
17. 10.1016/j.ijadhadh.2018.02.01410.1016/j.ijadhadh.2018.02.014 ↗
18. CEB-FIP. 1993. CEB-FIP Model Code 1990. London: Thomas Telford.
19. 10.1002/app.1005610.1002/app.10056 ↗
20. 10.1016/j.conbuildmat.2010.11.09610.1016/j.conbuildmat.2010.11.096 ↗
21. 10.1016/j.compstruct.2014.04.01510.1016/j.compstruct.2014.04.015 ↗
22. Dolan, C. W., J. Tanner, D. Mukai, H. Hamilton III, and E. Douglas. 2008. Design guidelines for durability of bonded CFRP repair/strengthening of concrete beams. NCHRP No. 155. Washington, DC: Transportation Research Board.
23. El Zghayar, E., K. Mackie, J. Xia. 2014. “Fiber-reinforced polymer (FRP) composites in retrofitting of concrete structures: Polyurethane systems versus epoxy systems.” ACI Spec. Publ. 298: 1–22.
24. 10.1016/j.ijadhadh.2018.04.01510.1016/j.ijadhadh.2018.04.015 ↗
25. 10.1016/j.ijadhadh.2019.01.02710.1016/j.ijadhadh.2019.01.027 ↗
26. 10.1061/(ASCE)CC.1943-5614.000015110.1061/(ASCE)CC.1943-5614.0000151 ↗
27. Grace, N. F., and S. B. Singh. 2005. “Durability evaluation of carbon fiber-reinforced polymer strengthened concrete beams: Experimental study and design.” ACI Struct. J. 102 (1): 40–53.
28. 10.1016/j.conbuildmat.2011.06.06310.1016/j.conbuildmat.2011.06.063 ↗
29. 10.1016/S0263-8223(03)00174-010.1016/S0263-8223(03)00174-0 ↗
30. ICCES. 2010. “AC125: Acceptance criteria for concrete and reinforced and unreinforced masonry strengthening using externally bonded fiber-reinforced polymer (FRP) composite systems.” Approved February.
31. 10.1061/(ASCE)1090-0268(2003)7:3(238)10.1061/(ASCE)1090-0268(2003)7:3(238) ↗
32. Konvalinka, P. 2002. “Effect of moisture content of concrete specimen on its stress–strain diagram in compression.” CTU Rep. 6 (2): 59–66.
33. 10.1016/j.conbuildmat.2005.01.03310.1016/j.conbuildmat.2005.01.033 ↗
34. 10.1007/s10443-010-9143-110.1007/s10443-010-9143-1 ↗
35. 10.1007/s12209-010-1399-x10.1007/s12209-010-1399-x ↗
36. Prasad, J., D. K. Jain, and A. K. Ahuja. 2006. “Factors influencing the sulphate resistance of cement concrete and mortar.” Asian J. Civ. Eng. 7 (3): 259–268.
37. Saadatmanesh, H., and F. Tannous. 1997. “Durability of FRP rebars and tendons.” In Proc., 3rd Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures, 147–154. Tokyo: Japan Concrete Institute.
38. Saadatmanesh, H., M. Tavakkolizadeh, and D. Mostofinejad. 2010. “Environmental effects on mechanical properties of wet lay-up fiber-reinforced polymer.” ACI Mater. J. 107 (3): 267–274.
39. 10.1061/(ASCE)CC.1943-5614.000013210.1061/(ASCE)CC.1943-5614.0000132 ↗
40. 10.1016/j.compositesb.2006.07.01110.1016/j.compositesb.2006.07.011 ↗
41. 10.1061/(ASCE)MT.1943-5533.000109310.1061/(ASCE)MT.1943-5533.0001093 ↗
42. 10.1016/j.conbuildmat.2018.09.16610.1016/j.conbuildmat.2018.09.166 ↗
43. 10.1061/(ASCE)1090-0268(2007)11:3(291)10.1061/(ASCE)1090-0268(2007)11:3(291) ↗
44. Teng, J. G., and J. F. Chen. 2007. “Debonding failures of RC beams strengthened with externally bonded FRP reinforcement: Behaviour and modelling.” In Proc., 1st Asia-Pacific Conf. on FRP in Structures, 12–14. Hong Kong: Univ. of Hong Kong.
45. Xian, G., B. Hong, H. Li, and L. Sui. 2015. “Durability study of carbon fiber-reinforced polyurethane pultruded plates subjected to water immersion.” In Proc., 20th Int. Conf. on Composite Materials, 1202–1211. Copenhagen, Denmark: Scandinavian Organizing and Scientific Committee.
46. 10.1016/j.coldregions.2010.11.00810.1016/j.coldregions.2010.11.008 ↗