Show source-provided references
1. ARAMIS. 2008. User manual software v. 6.3. Braunschweig, Germany: GOM GmbH.
2. Chajes, M. J., W. W. Finch, T. F. Januszka, and T. A. Thomson. 1996. “Bond and force transfer of composite material plates bonded to concrete.” ACI Struct. J. 93 (2): 208–217.
3. Czaderski C. 2012. “Strengthening of reinforced concrete members by prestressed externally bonded reinforcement with gradient method.” Ph.D. thesis Institute of Structural Engineering (IBK) ETH Zürich.
9. Li, W., P. Huang, Z. Chen, H. Cui, X. Guo, and B. Wu. 2022. “Bond–slip model considering the interface shear stress reversal phenomenon and data dispersion for FRP–concrete interface.” Eng. Fract. Mech. 268: 108492. https://doi.org/10.1016/j.engfracmech.2022.108492.
10.1016/j.engfracmech.2022.108492 ↗14. Meier, U., R. Brönnimann, P. Anderegg, G. P. Terrasi, M. Motavalli, and C. Czaderski. 2016. “Carbon fiber reinforced composites proved to be very successful in construction during a quarter of a century.” In Proc., European Conf. on Composite Materials. Augsburg, Germany: MAI Carbon Cluster Management GmbH.
18. Moghaddas, A., D. Mostofinejad, and E. Ilia. 2019. “Empirical FRP–concrete effective bond length model for externally bonded reinforcement on the grooves.” Composites, Part B 172: 323–338. https://doi.org/10.1016/j.compositesb.2019.05.068.
10.1016/j.compositesb.2019.05.068 ↗21. Mohammadi Ghahsareh, F., D. Mostofinejad, and S. Batebi. 2022. “Effects of different groove classes used in externally bonded reinforcement on grooves joints on carbon fiber-reinforced polymer-to-concrete bond behavior.” ACI Struct. J. 119 (4): 123–140. https://doi.org/http://dx.doi.org/10.14359/51734656.
22. Moshiri, N., C. Czaderski, D. Mostofinejad, A. Hosseini, and M. Motavalli. 2021a. “Effect of groove depth on behavior of prestressed CFRP strips bonded to concrete by using EBROG method.” In Proc., 10th Int. Conf. on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, 2188–2196. Cham, Switzerland: Springer.
23. Moshiri, N., C. Czaderski, D. Mostofinejad, A. Hosseini, K. Sanginabadi, M. Breveglieri, and M. Motavalli. 2020. “Flexural strengthening of RC slabs with nonprestressed and prestressed CFRP strips using EBROG method.” Composites, Part B 201: 108359. https://doi.org/10.1016/j.compositesb.2020.108359.
10.1016/j.compositesb.2020.108359 ↗24. Moshiri, N., C. Czaderski, D. Mostofinejad, and M. Motavalli. 2021b. “Bond resistance of prestressed CFRP strips attached to concrete by using EBR and EBROG strengthening methods.” Constr. Build. Mater. 266 (2): 121209. https://doi.org/10.1016/j.conbuildmat.2020.121209.
10.1016/j.conbuildmat.2020.121209 ↗28. S&P Clever Reinforcement. 2020. S&P CFRP-laminates carbon fiber plates for structural reinforcement. Technical Data Sheet. Seewen Switzerland: S&P Clever Reinforcement.
29. Stöcklin, I., and U. Meier. 2002. “Strengthening of concrete structures with prestressed and gradually anchored carbon fibre reinforced plastic (CFRP) strips.” In 1st Int. Conf. on Bridge Maintenance, Safety and Management. IABMAS.
34. Zamani Ghaleh, R., and D. Mostofinejad. 2022. “Empirical expression for failure strain in EBROG-bonded FRP–concrete joints.” J. Compos. Constr. 26 (4): 21 https://doi.org/10.1061/(ASCE)CC.1943-5614.0001226.
10.1061/(ASCE)CC.1943-5614.0001226 ↗