Calibration of Flexural Resistance Factors for Load and Resistance Factor Design of Concrete Bridge Girders Prestressed with Carbon Fiber–Reinforced Polymers
Source abstract
Abstract
In this research, the flexural resistance factors in the American Association of State Highway and Transportation Officials’ (AASHTO) load and resistance factor design (LRFD) format were calibrated for bridge girders that are prestressed with carbon fiber–reinforced polymers (CFRP). The underlying principle of LRFD is to achieve a uniform probability of failure (target reliability) for all possible design scenarios, which is realized through application of load and resistance factors. Calibration of resistance factors requires an extensive design space to be applicable to different design scenarios. For this purpose, 12 design cases with various girder span lengths, girder positions, girder spacing, roadway widths, and failure modes were considered. The load and resistance model random variables, their statistics, and flexural resistance model accuracy were obtained from material testing and literature. Existing load factors were used, and flexural resistance factors were derived using Monte Carlo simulation and a comparative reliability method for different target probabilities of failure for interior and exterior girders failing in tension and for interior girders failing in compression.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate Research Assistant, Dept. of Civil and Environmental Engineering, Univ. of Houston, Houston, TX 77204-4003.
Assistant Professor, Dept. of Civil and Environmental Engineering, Univ. of Houston, N107 Engineering Bldg. 1, Houston, TX 77204-4003 (corresponding author).
Assistant Professor, Dept. of Civil and Environmental Engineering, Univ. of Houston, Houston, TX 77204-4003.
Professor, Dept. of Civil and Environmental Engineering, Univ. of Houston, Houston, TX 77204-4003.
References (43)
Show source-provided references
1. AASHTO. (1994). “AASHTO LRFD bridge design specifications.” Washington DC.
2. AASHTO. (2002). “AASHTO standard specification for highway bridges.” Washington DC.
3. AASHTO. (2005). “AASHTO LRFD bridge design specifications.” Washington DC.
4. AASHTO. (2012). “AASHTO LRFD bridge design specifications.” Washington DC.
5. Serviceability of concrete beams prestressed by carbon-fiber-reinforced-plastic bars
6. 10.1061/(ASCE)1090-0268(1999)3:2(55)10.1061/(ASCE)1090-0268(1999)3:2(55) ↗
7. ACI (American Concrete Institute). (2011a). “Building code requirements for structural concrete (ACI 318-11) and commentary (ACI 318-11 R).” Farmington Hills MI.
8. ACI (American Concrete Institute). (2011b). “Prestressing concrete structures with FRP tendons.” ACI 440.4 R-04 Farmington Hills MI.
9. ACI (American Concrete Institute). (2012). “Guide test methods for fiber-reinforced polymer (FRP) composites for reinforcing or strengthening concrete and masonry structures.” ACI 440.3 R-12 Farmington Hills MI.
10. ACI (American Concrete Institute). (2014). “Building code requirements for structural concrete (ACI 318-14) and commentary (ACI 318-14 R).” Farmington Hills MI.
11. 10.1139/l92-11810.1139/l92-118 ↗
12. ASCE. (2010). “Minimum design loads for buildings and other structures.” ASCE 7-10 Reston VA.
13. BridgeTech Tennessee Technological University Mertz D. (2007). “Simplified live load distribution factor equations.” NCHRP Rep. No. 592 National Cooperative Highway Research Program (NCHRP) Transportation Research Board (TRB) Washington DC.
14. 10.15554/pcij.03012001.76.8710.15554/pcij.03012001.76.87 ↗
15. CSA (Canadian Standards Association). (2006). “Canadian highway bridge design code.” CAN/CSA-S6-06 Mississauga ON Canada.
16. CSA (Canadian Standards Association). (2012). “Design and construction of building components with fibre-reinforced polymers.” CAN/CSA-S806-12 Mississauga ON Canada.
17. Der Kiureghian A. · 2005
18. 10.1016/S1359-8368(01)00053-110.1016/S1359-8368(01)00053-1 ↗
19. 10.4028/www.scientific.net/AMR.168-170.135310.4028/www.scientific.net/AMR.168-170.1353 ↗
20. Enomoto T. and Ushijima K. (2012). “Use of CFCC tendons and reinforcements in concrete structures for durability.” Proc. 3rd Asia-Pacific Conf. on FRP in Structures IIFC Kingston ON Canada.
21. Behavior of CFRP for prestressing and shear reinforcements of concrete highway bridges
22. 10.1061/(ASCE)CC.1943-5614.000026610.1061/(ASCE)CC.1943-5614.0000266 ↗
23. Use of CFRP/CFCC reinforcement in prestressed concrete box-beam bridges
24. ISIS (Intelligent Sensing for Innovative Structures). (2008). “Prestressing concrete structures with fibre-reinforced polymers.” Canada Research Network Winnipeg MB Canada.
25. 10.1177/073168440403349210.1177/0731684404033492 ↗
26. Flexural behavior and energy absorption of carbon FRP reinforced concrete beams
27. Melchers R. E. · 1999
28. Mertol H. C. Rizkalla S. Scott P. Lees J. M. and El-Hacha R. (2006). “Durability and fatigue behavior of high-strength concrete beams prestressed with CFRP bars.” American Concrete Institute (ACI) Farmington Hills MI.
29. MoDOT(Missouri Department of Transportation). (2013). “Bridge standard drawings—Prestressed concrete I-girders.” 〈http://www.modot.org/business/standard_drawings2/psi_girders_new_title_block.htm〉 (Jan. 7 2015).
30. Mutsuyoshi H. Machida A. and Shiratori N. (1990). “Application of carbon fiber reinforced cables to concrete structures.” Proc. IABSE Symp. Mixed Structures Including New Materials Vol. 60 IABSE-AIPC-IVBH Zurich Switzerland 623–628.
31. NCHRP (National Cooperative Highway Research Program). (1998). “Development of comprehensive bridge specifications and commentary.” NCHRP Research Results Digest Number 198 Washington DC.
32. Calibration of design code for buildings (ACI 318): Part 1—Statistical models for resistance
33. 10.1016/0167-4730(93)90048-610.1016/0167-4730(93)90048-6 ↗
34. Nowak A. S. (1999). “Calibration of LRFD bridge design code.” NCHRP Rep. No. 368 Transportation Research Board (TRB) National Research Council (NRC) Washington DC.
35. 10.1061/(ASCE)CC.1943-5614.000031510.1061/(ASCE)CC.1943-5614.0000315 ↗
36. 10.15554/pcij.01011999.74.8510.15554/pcij.01011999.74.85 ↗
37. Shield C. K. Galambos T. V. and Gulbrandsen P. (2011). “On the history and reliability of the flexural strength of FRP reinforced concrete members in ACI 440.1 R.” Proc. 10th Int. Symp. on Fiber-Reinforced Polymer Reinforcement for Concrete Structures ACI Farmington Hills MI 275 1–18.
38. 10.1016/S0263-8223(99)00134-810.1016/S0263-8223(99)00134-8 ↗
39. TxDOT (Texas Department of Transportation). (2014). “Bridge standards.” 〈http://www.dot.state.tx.us/insdtdot/orgchart/cmd/cserve/standard/bridge-e.htm〉 (Dec. 29 2014).
40. Compressive strength and static modulus of elasticity of periwinkle shell ash blended cement concrete
41. WSDOT (Washington State Department of Transportation). (2015). “Bridge standard drawings.” 〈http://www.wsdot.wa.gov/Bridge/Structures/StandardDrawings.htm#W〉 (Jan. 7 2015).
42. Reliability analysis of concrete beams internally reinforced with fiber-reinforced polymer bars
43. Zou P. X. W. (2004). “Load-deflection response of high strength concrete beams pretensioned by carbon fibre reinforced polymers.” FRP Composites in Civil Engineering—CICE 2004 R. Seracino ed. Taylor & Francis London 781–791.10.1201/9780203970850.ch88 ↗