journal article·2025-10

Experimental and Theoretical Analysis of the Torsional Behavior of Flanged RC Members Strengthened with Bond-Critical FRP Systems

Mahshid Abdoli, Davood Mostofinejad, Mohammadreza Eftekhar

Publisher page

Abstract

This study aims to enhance the understanding of the torsional behavior of RC members strengthened with fiber-reinforced polymer (FRP) sheets, a topic that remains underexplored. It advances the field through experimental tests and proposes a design model for side-bonded strengthening of flanged RC beams. Two surface preparation methods are also compared: externally bonded reinforcement and externally bonded reinforcement on grooves (EBROG). The effect of FRP fan anchors on shifting the bond-critical mechanism to contact-critical behavior is also examined. Finally, it introduces an effective method that transforms bond-critical systems into contact-critical, significantly enhancing the efficiency of the strengthening systems. The design model is also developed to account for the effects of FRP surface preparation methods and FRP anchors on system response. It calculates the optimal FRP percentage in both transverse and longitudinal directions. The results highlight that the EBROG technique transfers shear stresses to deeper concrete layers, which boosts torsional resistance by up to 68%. It demonstrates that combining the EBROG method with FRP fans can quadruple the efficiency of torsional strengthening.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Isfahan Univ. of Technology (IUT)

References (41)

Show source-provided references
1. Abdoli, M., and D. Mostofinejad. 2023. “Torsional behavior of FRP-strengthened reinforced concrete members: Theoretical analysis and modeling.” Constr. Build. Mater. 142: 132636. https://doi.org/10.1016/j.conbuildmat.2023.132636.10.1016/j.conbuildmat.2023.132636 ↗
2. Abdoli, M., and D. Mostofinejad. 2024. “Theoretical analysis of behavior of FRP-strengthened reinforced concrete members subjected to combined torsion and biaxial bending.” J. Compos. Constr. 28 (3): 04024008. https://doi.org/10.1061/JCCOF2.CCENG4397.10.1061/JCCOF2.CCENG-4397 ↗
3. Abdoli, M., D. Mostofinejad, and M. Eftekhar. 2023. “Ultimate torsional resistance and failure modes of FRP-strengthened reinforced concrete members: A nonlinear design model.” Eng. Struct. 283: 115867. https://doi.org/10.1016/j.engstruct.2023.115867.10.1016/j.engstruct.2023.115867 ↗
4. Abdoli, M., D. Mostofinejad, and M. Eftekhar. 2024a. “Aggregate interlock and effective strain of FRP-strengthened flanged RC members subjected to torsion: Experimental evaluation and analytical modeling.” Constr. Build. Mater. 437: 136865. https://doi.org/10.1016/j.conbuildmat.2024.136865.10.1016/j.conbuildmat.2024.136865 ↗
5. Abdoli, M., D. Mostofinejad, M. Eftekhar, and A. Saljoughian. 2024b. “Torsional strengthening of T-shaped RC members with FRP composites using EBROG method: Experimental investigation and analysis.” Constr. Build. Mater. 437: 136829. https://doi.org/10.1016/j.conbuildmat.2024.136829.10.1016/j.conbuildmat.2024.136829 ↗
6. ACI (American Concrete Institute). 2012. Report on torsion in structural concrete. ACI Committee 445. Farmington Hills, MI: ACI.
7. ACI (American Concrete Institute). 2019. Building code requirements for structural concrete. ACI 318-19. Farmington Hills, MI: ACI.
8. ACI (American Concrete Institute). 2023. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI PRC-440.2-23, ACI Committee 440. Farmington Hills, MI: ACI.
9. Alabdulhady, M. Y., and L. H. Sneed. 2019. “Torsional strengthening of reinforced concrete beams with externally bonded composites: A state-of-the-art review.” Constr. Build. Mater. 205: 148–163. https://doi.org/10.1016/j.conbuildmat.2019.01.163.10.1016/j.conbuildmat.2019.01.163 ↗
10. Al-Bayati, G., R. Al-Mahaidi, M. J. Hashemi, and R. Kalfat. 2017. “Torsional strengthening of RC beams using NSM CFRP rope and innovative adhesives.” Compos. Struct. 87: 190–202. https://doi.org/10.1016/j.compstruct.2017.12.016.
11. Ameli, M., and H. R. Ronagh. 2007. “Analytical method for evaluating ultimate torque of FRP strengthened reinforced concrete beams.” J. Compos. Constr. 11 (4): 384–390. https://doi.org/10.1061/(asce)1090-0268(2007)11:4(384).10.1061/(ASCE)1090-0268(2007)11:4(384) ↗
12. Askandar, N. H., A. D. Mahmood, and R. Kurda. 2022. “Behaviour of RC beams strengthened with FRP strips under combined action of torsion and bending.” Eur. J. Environ. Civ. Eng. 26 (9): 4263–4279. https://doi.org/10.1080/19648189.2020.1847690.10.1080/19648189.2020.1847690 ↗
13. ASTM. 2021. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39/C39M-21. West Conshohocken, PA: ASTM.
14. ASTM. 2022. Standard specification for deformed and plain carbon-steel bars for concrete reinforcement. ASTM a615/A615M. West Conshohocken, PA: ASTM.
15. Atea, R. S. 2017. “Torsional behavior of reinforced concrete T-beams strengthened with CFRP strips.” Case Stud. Constr. Mater. 7: 110–117. https://doi.org/10.1016/j.cscm.2017.03.002.
16. Chai, H. K., A. A. Majeed, and A. A. Allawi. 2014. “Torsional analysis of multicell concrete box girders strengthened with CFRP using a modified softened truss model.” J. Bridge Eng. 20 (8): 4014001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000621.10.1061/(ASCE)BE.1943-5592.0000621 ↗
17. Chalioris, C. E. 2007. “Analytical model for the torsional behavior of reinforced concrete beams retrofitted with FRP materials.” Eng. Struct. 29 (12): 3263–3276. https://doi.org/10.1016.j.engstruct.2007.09.009.10.1016/j.engstruct.2007.09.009 ↗
18. Chalioris, C. E. 2008. “Torsional strengthening of rectangular and flanged beams using carbon fibre-reinforced-polymers—Experimental study.” Constr. Build. Mater. 22 (1): 21–29. https://doi.org/10.1016/j.conbuildmat.2006.09.003.10.1016/j.conbuildmat.2006.09.003 ↗
19. CNR (National Research Council). 2013. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures: Materials, RC and PC structures, masonry structures. CNR-DT 200 R1/2013. Rome: CNR.
20. Deifalla, A., A. Awad, and M. Elgarhy. 2013. “Effectiveness of externally bonded CFRP strips for strengthening flanged beams under torsion: An experimental study.” Eng. Struct. 56: 2065–2075. https://doi.org/10.1016/j.engstruct.2013.08.027.10.1016/j.engstruct.2013.08.027 ↗
21. Deifalla, A., and A. Ghobarah. 2010a. “Strengthening RC T-beams subjected to combined torsion and shear using FRP fabrics: Experimental study.” J. Compos. Constr. 14: 301–311. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000091.10.1061/(ASCE)CC.1943-5614.0000091 ↗
22. Deifalla, A., and A. Ghobarah. 2010b. “Full torsional behavior of RC beams wrapped with FRP: Analytical model.” J. Compos. Constr. 14: 289–300. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000085.10.1061/(ASCE)CC.1943-5614.0000085 ↗
23. Deifalla, A., and A. Ghobarah. 2014. “Behavior and analysis of inverted T-shaped RC beams under shear and torsion.” Eng. Struct. 68: 5–70. https://doi.org/10.1016/j.engstruct.2014.02.011.10.1016/j.engstruct.2014.02.011 ↗
24. fib (International Federation for Structural Concrete). 2019. Externally bonded FRP reinforcement for RC structures. fib Bulletin 90. Lausanne, Switzerland: fib.
25. Heydari, P., D. Mostofinejad, M. Eftekhar, and A. Saljoughian. 2024. “Seismic flexural rehabilitation of RC coupling beams with FRP sheets: Evaluation of EBROG technique.” Structures 68: 107076. https://doi.org/10.1016/j.istruc.2024.107076.10.1016/j.istruc.2024.107076 ↗
26. Hii, A. K. Y., and R. Al-Mahaidi. 2006. “Experimental investigation on torsional behavior of solid and box-section RC beams strengthened with CFRP using photogrammetry.” J. Compos. Constr. 10 (4): 321–329. https://doi.org/10.1061/(asce)1090-0268(2006)10:4(321).10.1061/(ASCE)1090-0268(2006)10:4(321) ↗
27. Hii, A. K. Y., and R. Al-Mahaidi. 2007. “Torsional capacity of CFRP strengthened reinforced concrete beams.” J. Compos. Constr. 11 (1): 71–80. https://doi.org/10.1061/(asce)10900268(2007)11:1(71).10.1061/(ASCE)1090-0268(2007)11:1(71) ↗
28. Hsu T. T. C. and Y. L. Mo. 2010. Unified theory of concrete structures. Houston TX: Wiley.10.1002/9780470688892 ↗
29. Jing, M., W. Raongjant, and Z. Li. 2007. “Torsional strengthening of reinforced concrete box beams using carbon fiber reinforced polymer.” Compos. Struct. 78 (2): 264–270. https://doi.org/10.1016/j.compstruct.2005.10.017.10.1016/j.compstruct.2005.10.017 ↗
30. JSCE (Japan Society of Civil Engineers). 1997. Recommendation for design and construction of concrete structures using continuous fiber reinforcing materials. JSCE-97. Rep. No. 23, Research Committee on Continuous Fiber Reinforced Material. Tokyo: JSCE.
31. Mohammadi Ghahsareh, F., and D. Mostofinejad. 2021. “Groove classification in EBROG FRP-to-concrete joints.” Constr. Build. Mater. 275: 122169. https://doi.org/10.1016/j.conbuildmat.2020.122169.10.1016/j.conbuildmat.2020.122169 ↗
32. Mostofinejad, D., and M. Abdoli. 2025. “Compatibility analysis of FRP-strengthened exterior RC beam-column joints: An advanced analytical model.” Dev. Built Environ. 21: 100634. https://doi.org/10.1016/j.dibe.2025.100634.10.1016/j.dibe.2025.100634 ↗
33. Mostofinejad, D., M. Abdoli, M. Savoj, and M. Hajrasouliha. 2024. “Hybrid rehabilitation of 3D RC beam-column joints using UHP-HFRC and FRP wrapping: Experimental evaluation and theoretical analysis.” J. Build. Eng. 97: 110758. https://doi.org/10.1016/j.jobe.2024.110758.10.1016/j.jobe.2024.110758 ↗
34. Mostofinejad, D., and E. Mahmoudabadi. 2010. “Grooving as alternative method of surface preparation to postpone debonding of FRP laminates in concrete beams.” J. Compos. Constr. 14: 804–811. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000117.10.1061/(ASCE)CC.1943-5614.0000117 ↗
35. Mostofinejad, D., and S. M. Shameli. 2013. “Externally bonded reinforcement in grooves (EBRIG) technique to postpone debonding of FRP sheets in strengthened concrete beams” Constr. Build. Mater. 38: 751–758. https://doi.org/10.1016/j.conbuildmat.2012.09.030.10.1016/j.conbuildmat.2012.09.030 ↗
36. NCHRP (National Cooperative Highway Research Program). 2010. Recommended guide specification for the design of externally bonded FRP systems for repair and strengthening of concrete bridge elements. NCHRP Rep. 655. Washington, DC: Transportation Research Board.
37. Panchacharam, S., and A. Belarbi. 2002. “Torsional behavior of reinforced concrete beams strengthened with FRP composites.” Proc., 1st FIB Congress, 1–11. Lausanne, Switzerland: fib.
38. Quantum Group. 2017. Product data sheet: Quantum EPR 3301 epoxy resin. London UK: Quantom Group.
39. Sika Group. 2017. Product data sheet: Sika-Wrap300 C, woven carbon fiber fabric for structural strengthening. Zurich, Switzerland: Sika Group.
40. Täljsten B. 2006. FRP strengthening of existing concrete structures design guideline. Luleå Sweden: Luleå University of Technology.
41. Yazdani, A., K. H. Sanginabadi, M. S. Shahidzadeh, S. Razmyan, M. Salimi, and D. Mostofinejad. 2023. “Evaluation of existing FRP-to-concrete bond strength models using data envelopment analysis.” J. Compos. Constr. 04023026. https://doi.org/10.1061/JCCOF2.CCENG-4103.10.1061/JCCOF2.CCENG-4103 ↗