Construction of a Pultruded Composite Structure: Case Study
Source abstract
Abstract
In a recent research and development project a novel prototype pultruded composite structure was designed, fabricated, and tested. The bargelike, box-girder type structure measured approximately 24-ft long by 15-ft wide by 5-ft high (7.3 × 4.6 × 1.5 m). The structure was constructed from commercially available off-the-shelf pultruded structural profiles and panel sections. Tubular steel structural members and steel hardware were used to connect and join the different sections and subassemblies. The structure consisted of three 24-ft-long by 5-ft-wide by 5-ft-high (7.3 × 1.5 × 1.5 m) rectangular box-girder modular units and six 4-ft (1.2-m) wide modular deck panels. A design requirement was that the structure be capable of being transported by conventional, nonpermit trucking and be assembled at a remote site for subsequent testing. The structure was fabricated at a ship building and repair shop in Norfolk, Va., whose primary expertise was with conventional steel ship-structure fabrication methods and which had no prior experience with fabricating a large pultruded structural system. To fabricate and assemble the structure, a set of construction documents was produced. These included a set of written construction and assembly specifications, a set of detailed construction drawings, a detailed parts list, and a schedule. This case study details the construction process and provides a step-by-step explanation of how the engineering design team developed the construction documents for a relatively complex pultruded composite structure. Details of the design, analysis, and testing of the system are provided elsewhere.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Selection and Properties · Marine and Offshore Engineering Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Members, ASCE
Member, ASCE
Student Member, ASCE
Prof., Dept. of Civ. and Envir. Engrg., Univ. of Wisconsin, Madison, WI 53706. E-mail: bank@engr.wisc.edu
Asst. Prof., Arch. Program, Georgia Inst. of Technol., Atlanta, GA 33035. E-mail: russell.gentry@arch.gatech.edu
References (8)
Show source-provided references
1. American Bureau of Shipping (ABS). ( 1987). Rules for certification of cargo containers New York.
2. Critchfield M. O. Judy T. D. and Kursweil A. D. (1994). “Low-cost design and fabrication of composite ship structures.” Marine Structures 7 475–494.10.1016/0951-8339(94)90036-1 ↗
3. Hepburn R. D. Magliulo G. and Wright T. (1991). “The U.S. Navy's new coastal minehunter (MHC): Design material and construction facilities.” Naval Engrs. J. 103(4) 60–73.10.1111/j.1559-3584.1991.tb00938.x ↗
4. ISO. ( 1988). “Series 1 freight containers—Classification dimensions and ratings.” ISO Standard 668 Switzerland.
5. Kane P. R. (1996). “LOTS development.” Military Engr. 88(579) 42–43.
6. Sedricks J. A. (1994). “Advanced materials for marine environments.” Mat. Perf. 33(2) 56–63.
7. Smith S. J. Bank L. C. Gentry T. R. Nuss K. H. Hurd S. S. Duich S. and Oh B. (2000). “Analysis and testing of a prototype pultruded causeway structure.” Composite Structures 49(2) 141–150.10.1016/S0263-8223(99)00116-6 ↗
8. Vaughters T. (1994). “Joint logistics over the shore operations.” Naval Engrs. J. 106 256–263.10.1111/j.1559-3584.1994.tb02857.x ↗