Experimental Results on Centrifugated GFRP Poles for Electric Lifelines
Source abstract
Abstract
In this paper the results of an experimental investigation on glass fiber reinforced plastic (GFRP) centrifugated transmission utility poles are discussed. The study is principally aimed to analyze the effect of manufacturing process on the mechanical properties of the poles. The results of the experimental investigation are especially concerned with the analysis of some parameters that mostly affect the tensile behavior of the poles in terms of stiffness and strength; among these, physical parameters such as glass percentage and thickness, and mechanical parameters such as longitudinal modulus and tensile strength are considered. The analysis evidenced the high quality of the manufacturing process in providing a product that has low tolerances in the experimental values of dimensional and tensile properties of the poles. An effective stiffness is defined to model satisfactorily the experimental tensile response and to provide a design tool for the mechanical properties of the poles. This parameter, which directly includes the dependency on glass content and thickness values, appears an effective tool in the prediction of the poles' structural response.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Vibration and Dynamic Analysis · Mechanical stress and fatigue analysis · Soil Mechanics and Vehicle Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Assoc. Prof., Dipartimento di Ingegneria Strutturale, Politecnico di Milano, Milan, Italy.
Postdoctoral Res. Fellow, Dipartimento di Analisi e Progettazione Strutturale, Università degli Studi di Napoli Federico II, Naples, Italy.
References (13)
Show source-provided references
1. Agarwal B. D. · 1980
2. Bader M. G. (1990). “Tensile strength of uniaxial composites.” Sci. and Engrg. of Compos. Mat. 1–11.
3. Calcote L. R. · 1969
4. Castiglioni C. A. Imbimbo M. and Spessa A. (1996). “Prove sperimentali su tubi in vetroresina per pali di linee di telecomunicazione.” Proc. 11th Congresso CTE Nuova Tecnologia Edilizia Laser Copy Center Milan Italy 403–412 (in Italian).
5. Chawla K. K. ( 1987). Composite materials . Springer New York.10.1007/978-1-4757-3912-1 ↗
6. Imbimbo M. and De Luca A. (1996). “Problemi strutturali nel progetto di tubazioni in PRFV per applicazioni idrauliche.” Proc. 11th Congresso CTE Nuova Tecnologia Edilizia Laser Copy Center Milan Italy 391–401 (in Italian).
7. Karam G. N. ( 1991). “Effect of fibre volume on tensile properties of real unidirectional fibre-reinforced composites.” Compos. 22(2) 84–88.10.1016/0010-4361(91)90665-4 ↗
8. “Materie plastiche rinforzate con fibre di vetro. Determinazione delle caratteristiche a trazione.” (1978). UNIPLAST EN 61 UNI Milan Italy (in Italian).
9. Mitelman A. and Roman I. (1990). “Tensile properties of real unidirectional Kevlar/epoxy composites.” Compos. 21(1) 63–69.10.1016/0010-4361(90)90099-I ↗
10. “Norme tecniche per il calcolo l'esecuzione ed il collaudo delle strutture in cemento armato normale e precompresso e per le strutture metalliche.” (1996). Supplemento ordinario alla G.U. n.29 del 5/02/1996 parte 1 Decreto Ministeriale Intituto Poligrafico e Zecca dello Stato Rome 135 (in Italian).
11. “Tensile properties of fiber-resin composites.” (1982). ASTM D 3039-76 . ASTM West Conshohocken Pa.
12. “Tubi di acciaio. Sistemi di tolleranze.” (1981). UNI ISO 5252 UNI Milan Italy (in Italian).
13. Zweben C. · 1989