Discussion of “Bond Behavior of Fiber Reinforced Polymer Bars under Direct Pullout Conditions” by Zenon Achillides and Kypros Pilakoutas
Source abstract
Abstract
This article comments on earlier research on bond behavior of fiber reinforced polymer (FRP) bars (Achillides and Pilakoutas, 2004). The author seeks to clarify the bond behavior of FRP bars with concrete, specifically the discussion of the shear lag effect. Shear lag has a noticeable effect on the tensile strength of FRP rebars. Larger diameter rebars have a more significant shear lag effect and consequently a lower tensile strength. Wang points out that the diameter effect also exists in steel rebars and that normal stress distribution on rebar cross sections does not have a direct relationship to bond strength, refuting Achillides and Pilakoutas' contention that higher stresses caused by shear lag lead to lower than normal bond strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
PhD Candidate, Dept. of Civil, Architectural and Environmental Engineering, Univ. of Missouri–Rolla, MO 65409, Email: hw9n9@umr.edu
References (4)
Show source-provided references
1. Pullout tests on high strength reinforcing bars
2. Effect of the bar diameter on the bond strength of passive reinforcement in high-performance concrete
3. Measurement of the distribution of tensile and bond stresses along reinforcing bars
4. Local bond of deformed bars with different diameters in confined concrete