journal article·2024-02-06Open access

Effect of grain boundary segregation and oxygen vacancy annihilation on aging resistance of cobalt oxide-doped 3Y-TZP ceramics for biomedical applications

Shide Yu, Zhenyu Chen, Yiyin Sun, Dahong Huang, Ting Sun

Abstract

Abstract This study aims to investigate the diffusion stabilization process of nano-Co2O3 during the non-precursor transformation of 3Y-TZP. 3Y-TZP was set as the control group, and the experimental groups were 0.1–0.3 mol% nano-Co2O3-doped 3Y-TZP. The samples were prepared by the ball milling process, isostatic cool pressing, and sintering. All samples were hydrothermally treated at 134°C and 2 bar for different time periods. The resistance to low-temperature degradation of nano-Co2O3-doped 3Y-TZP was analyzed by X-ray diffraction. The microstructure of zirconia ceramic samples was determined by scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and electron paramagnetic resonance studies. The addition of nano-Co2O3 into 3Y-TZP resulted in higher hydrothermal aging resistance than 3Y-TZP. The addition of 0.2 mol% nano-Co2O3 dopants resulted in the highest hydrothermal aging resistance among nano-Co2O3-doped 3Y-TZP ceramics. The grain sizes of 3Y-0.2Co are smaller than those in the control group. With the increase of cobaltous oxide doping contents, the segregation of Co3+ ions at the crystal boundary increased. The content of oxygen vacancies on the surface of the sample increased with the increase of the Co2O3 doping content. The oxygen vacancy concentrations of 3Y-0.2Co increased obviously after aging. 3Y-0.1Co, 3Y-0.3Co, and the control showed decreased oxygen vacancy concentrations after aging. Trivalent element doping of 3Y-TZP effectively improved the aging resistance of 3Y-TZP. The addition of 0.2 mol% nano-Co2O3 resulted in the highest hydrothermal aging resistance. Improved aging resistance is attributed to the nano-Co2O3 doping resulting in the 3Y-TZP grain size inhibition, grain boundary segregation of cobalt ions, and oxygen vacancy maintenance. This work is expected to provide an effective reference for the development and application of budget dental materials by regulating grain boundary engineering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Foshan Stomatology Hospital & School of Medicine, Foshan University , Foshan , 528000 , China

References (37)

Show source-provided references
1. Tovar-Vargas, D., B. Ferrari, A. J. Sanchez-Herencia, M. Anglada, and E. Jimenez-Pique. Low temperature degradation and mechanical properties of alumina reinforced ceria-zirconia by colloidal processing. Journal of the European Ceramic Society, Vol. 41, No. 2, 2021, pp. 1459–1470.10.1016/j.jeurceramsoc.2020.09.031 ↗
2. Sun, T., X. Liu, X. Zhan, L. Ou, and R. Lai. Hepatic distribution and toxicity of zirconia nanoparticles in vivo and in vitro. Process Safety and Environmental Protection, Vol. 147, 2021, pp. 134–145.10.1016/j.psep.2020.09.021 ↗
3. Sun, T., Y. Kang, J. Liu, Y. Zhang, L. Ou, X. Liu, et al. Nanomaterials and hepatic disease: toxicokinetics, disease types, intrinsic mechanisms, liver susceptibility, and influencing factors. Journal of nanobiotechnology, Vol. 19, No. 1, 2021, id. 108.10.1186/s12951-021-00843-2 ↗
4. Nishihara, H., M. H. Adanez, and W. Att. Current status of zirconia implants in dentistry: Preclinical tests. Journal of Prosthodontic Research, Vol. 63, No. 1, 2019, pp. 1–14.10.1016/j.jpor.2018.07.006 ↗
5. Sun, T., R. Liu, X. Liu, X. Feng, Y. Zhang, and R. Lai. The biocompatibility of dental graded nano-glass-zirconia material after aging. Nanoscale Research Letters, Vol. 13, No. 1, 2018, id. 61.10.1186/s11671-018-2479-4 ↗
6. Chevalier, J. What future for zirconia as a biomaterial? Biomaterials, Vol. 27, No. 4, 2006, pp. 535–543.10.1016/j.biomaterials.2005.07.034 ↗
7. Masonis, J. L., R. B. Bourne, M. D. Ries, R. W. McCalden, A. Salehi, and D. C. Kelman. Zirconia femoral head fractures: A clinical and retrieval analysis. The Journal of arthroplasty, Vol. 19, No. 7, 2004, pp. 898–905.10.1016/j.arth.2004.02.045 ↗
8. Ban, S. Chemical durability of high translucent dental zirconia. Dental materials journal, Vol. 39, No. 1, 2020, pp. 12–23.10.4012/dmj.2019-109 ↗
9. Badarneh, A., J. J. Eun Choi, K. Lyons, G. Porter, N. Waddell, and K. Chun Li. The effect of aging on the wear performance of monolithic zirconia. Dental Materials: Official Publication of the Academy of Dental Materials, Vol. 38, No. 5, 2022, pp. e136–e146.10.1016/j.dental.2022.04.018 ↗
10. Takigawa, Y., T. Shibano, Y. Kanzawa, and K. Higashi. Effect of small amount of insoluble dopant on tetragonal to monoclinic phase transformation in tetragonal zirconia polycrystal. Materials Transactions, Vol. 50, No. 5, 2009, pp. 1091–1095.10.2320/matertrans.MC200832 ↗
11. Kumar, C. S., R. Bauri, and G. S. Reddy. Phase stability and conductivity of rare earth co-doped nanocrystalline zirconia electrolytes for solid oxide fuel cells. Journal of Alloys and Compounds, Vol. 833, 2020, id. 155100.10.1016/j.jallcom.2020.155100 ↗
12. Samodurova, A., A. Kocjan, M. V. Swain, and T. Kosmač. The combined effect of alumina and silica co-doping on the ageing resistance of 3Y-TZP bioceramics. Acta Biomaterialia, Vol. 11, 2015, pp. 477–487.10.1016/j.actbio.2014.09.009 ↗
13. Zhang, F., K. Vanmeensel, M. Batuk, J. Hadermann, M. Inokoshi, B. Van Meerbeek, et al. Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation. Acta Biomaterialia, Vol. 16, 2015, pp. 215–222.10.1016/j.actbio.2015.01.037 ↗
14. Ramesh, S., K. S. Lee, and C. Tan. A review on the hydrothermal ageing behaviour of Y-TZP ceramics. Ceramics International, Vol. 44, No. 17, 2018, pp. 20620–20634.10.1016/j.ceramint.2018.08.216 ↗
15. Khan, M., S. Ramesh, L. Bang, Y. Wong, S. Ubenthiran, C. Tan, et al. Effect of copper oxide and manganese oxide on properties and low temperature degradation of sintered Y-TZP ceramic. Journal of Materials Engineering and Performance, Vol. 23, No. 12, 2014, pp. 4328–4335.10.1007/s11665-014-1231-1 ↗
16. Pandoleon, P., E. Kontonasaki, N. Kantiranis, N. Pliatsikas, P. Patsalas, L. Papadopoulou, et al. Aging of 3Y-TZP dental zirconia and yttrium depletion. Dental Materials: Official Publication of the Academy of Dental Materials, Vol. 33, No. 11, 2017, pp. e385–e392.10.1016/j.dental.2017.07.011 ↗
17. Zhang, F., M. Batuk, J. Hadermann, G. Manfredi, A. Mariën, K. Vanmeensel, et al. Effect of cation dopant radius on the hydrothermal stability of tetragonal zirconia: Grain boundary segregation and oxygen vacancy annihilation. Acta Materialia, Vol. 106, 2016, pp. 48–58.10.1016/j.actamat.2015.12.051 ↗
18. Fabris, S., A. T. Paxton, and M. W. Finnis. A stabilization mechanism of zirconia based on oxygen vacancies only. Acta Materialia, Vol. 50, No. 20, 2002, pp. 5171–5178.10.1016/S1359-6454(02)00385-3 ↗
19. Fabbri, P., C. Piconi, E. Burresi, G. Magnani, F. Mazzanti, and C. Mingazzini. Lifetime estimation of a zirconia-alumina composite for biomedical applications. Dental Materials: Official Publication of the Academy of Dental Materials, Vol. 30, No. 2, 2014, pp. 138–142.10.1016/j.dental.2013.10.006 ↗
20. Pezzotti, G., M. C. Munisso, A. A. Porporati, and K. Lessnau. On the role of oxygen vacancies and lattice strain in the tetragonal to monoclinic transformation in alumina/zirconia composites and improved environmental stability. Biomaterials, Vol. 31, No. 27, 2010, pp. 6901–6908.10.1016/j.biomaterials.2010.05.035 ↗
21. de Paula Miranda, R. B., T. P. Leite, A. C. F. Pedroni, M. M. Marques, N. B. de Lima, J. Marchi, et al. Effect of titania addition and sintering temperature on the microstructure, optical, mechanical and biological properties of the Y-TZP/TiO(2) composite. Dental Materials: Official Publication of the Academy of Dental Materials, Vol. 36, No. 11, 2020, pp. 1418–1429.10.1016/j.dental.2020.08.014 ↗
22. Chen, T., S. Tekeli, R. P. Dillon, and M. L. Mecartney. Phase stability, microstructural evolution and room temperature mechanical properties of TiO2 doped 8 mol% Y2O3 stabilized ZrO2 (8Y-CSZ). Ceramics International, Vol. 34, No. 2, 2008, pp. 365–370.10.1016/j.ceramint.2006.10.015 ↗
23. Standardization IOf. ISO 6872: 2008. Dentistry: Ceramic materials. ISO Geneva; 2008.
24. Quinn, G. D. and R. C. Bradt. On the Vickers indentation fracture toughness test. Journal of the American Ceramic Society, Vol. 90, No. 3, 2007, pp. 673–680.10.1111/j.1551-2916.2006.01482.x ↗
25. Furtado de Mendonca, A., M. Shahmoradi, C. V. D. Gouvêa, G. M. De Souza, and A. Ellakwa. Microstructural and mechanical characterization of CAD/CAM materials for monolithic dental restorations. Journal of prosthodontics: Official Journal of the American College of Prosthodontists, Vol. 28, No. 2, 2019, pp. e587–e594.10.1111/jopr.12964 ↗
26. Niihara, K., R. Morena, and D. Hasselman. Evaluation of K Ic of brittle solids by the indentation method with low crack-to-indent ratios. Journal of Materials Science Letters, Vol. 1, 1982, pp. 13–16.10.1007/BF00724706 ↗
27. Xu, S., X. Tan, F. Liu, L. Zhang, Y. Huang, B. A. Goodman, et al. Growth and optical properties of thulia-doped cubic yttria stabilized zirconia single crystals. Ceramics International, Vol. 45, No. 13, 2019, pp. 15974–15979.10.1016/j.ceramint.2019.05.106 ↗
28. Hallmann, L., A. Mehl, P. Ulmer, E. Reusser, J. Stadler, R. Zenobi, et al. The influence of grain size on low-temperature degradation of dental zirconia. Journal of Biomedical Materials Research Part B, Applied Biomaterials, Vol. 100, No. 2, 2012, pp. 447–456.10.1002/jbm.b.31969 ↗
29. Bowen, C., S. Ramesh, C. Gill, and S. Lawson. Impedance spectroscopy of CuO-doped Y-TZP ceramics. Journal of Materials Science, Vol. 33, 1998, pp. 5103–5110.10.1023/A:1004455130927 ↗
30. Chen, I.-W. Mobility control of ceramic grain boundaries and interfaces. Materials Science and Engineering: A, Vol. 166, No. 1–2, 1993, pp. 51–58.10.1016/0921-5093(93)90309-3 ↗
31. Stepanov, S., O. Khasanov, E. Dvilis, V. Paygin, D. Valiev, and M. Ferrari. Luminescence performance of yttrium-stabilized zirconia ceramics doped with Eu3+ ions fabricated by Spark Plasma Sintering technique. Ceramics International, Vol. 47, No. 5, 2021, pp. 6608–6613.10.1016/j.ceramint.2020.10.250 ↗
32. Guo, X. Hydrothermal degradation mechanism of tetragonal zirconia. Journal of Materials Science, Vol. 36, 2001, pp. 3737–3744.10.1023/A:1017925800904 ↗
33. Nogiwa-Valdez, A. A., W. M. Rainforth, P. Zeng, and I. M. Ross. Deceleration of hydrothermal degradation of 3Y-TZP by alumina and lanthana co-doping. Acta Biomaterialia, Vol. 9, No. 4, 2013, pp. 6226–6235.10.1016/j.actbio.2012.11.027 ↗
34. Gremillard, L., J. Chevalier, T. Epicier, and G. Fantozzi. Improving the durability of a biomedical‐grade zirconia ceramic by the addition of silica. Journal of the American Ceramic Society, Vol. 85, No. 2, 2002, pp. 401–407.10.1111/j.1151-2916.2002.tb00103.x ↗
35. Chevalier, J., L. Gremillard, A. V. Virkar, and D. R. Clarke. The tetragonal‐monoclinic transformation in zirconia: lessons learned and future trends. Journal of the American Ceramic Society, Vol. 92, No. 9, 2009, pp. 1901–1920.10.1111/j.1551-2916.2009.03278.x ↗
36. Ansari, S., R. Bhor, K. Pai, D. Sen, S. Mazumder, K. Ghosh, et al. Cobalt nanoparticles for biomedical applications: Facile synthesis, physiochemical characterization, cytotoxicity behavior and biocompatibility. Applied Surface Science, Vol. 414, 2017, pp. 171–187.10.1016/j.apsusc.2017.03.002 ↗
37. Baino, F., M. Montazerian, and E. Verné. Cobalt-doped bioactive glasses for biomedical applications: A review. Materials, Vol. 16, No. 14, 2023, p. 4994.10.3390/ma16144994 ↗