Growth of multicrystalline silicon ingot with both enhanced quality and yield through quartz seeded method
Source abstract
Abstract
An effective method for ingot quality control in directional solidification by using artificially designed quartz coating as seed is demonstrated in this paper. Quartz powders sprayed at the bottom of the crucible provided numerous nucleation points for the silicon grain growth. The quartz seeded growth ingot showed a large number of small and uniform silicon grains at the bottom, although the grain size increased with crystal growth. Comparatively less dislocation agglomerates and multiplication rate through bottom to top were observed through photoluminescence (PL) analysis. Crystals produced by quartz seeded method showed a higher and more uniform minority carrier lifetime distribution compared to that produced from normal method without seed, and shorter low lifetime area length at the bottom compared to that produced from mc-Si seed-assisted growth method, indicating larger production yield under the same feedstock charging weight. An enhanced average solar cell conversion efficiency of as high as 0.52% in absolute value was obtained compared to that made from seedless method under the same cell manufacture process line, very close to that made from mc-Si seed-assisted growth method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Crystal growth of 50cm square mono-like Si by directional solidification and its characterization10.1016/j.jcrysgro.2014.03.016 ↗
2. Mono-crystalline growth in directional solidification of silicon with different orientation and splitting of seed crystals10.1016/j.jcrysgro.2012.04.035 ↗
3. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
4. Characterization of defects in mono-like silicon wafers and their effects on solar cell efficiency10.1016/j.solmat.2013.09.020 ↗
5. Characteristics and value enhancement of cast silicon ingots10.1016/j.solmat.2015.03.007 ↗
6. Performance of solar cells fabricated from cast quasi-single crystalline silicon ingots10.1016/j.solener.2014.09.047 ↗
7. Influence of crystalline defects in Czochralski-grown Si multicrystal on minority carrier lifetime10.1016/j.jcrysgro.2007.05.042 ↗
8. Si multicrystals grown by the Czochralski method with multi-seeds10.1016/j.jcrysgro.2007.06.032 ↗
9. Arrangement of dendrite crystals grown along the bottom of Si ingots using the dendritic casting method by controlling thermal conductivity under crucibles10.1016/j.jcrysgro.2011.01.069 ↗
10. An enhanced cooling design in directional solidification for high quality multi-crystalline solar silicon10.1016/j.jcrysgro.2011.12.045 ↗
11. Grain control in directional solidification of photovoltaic silicon10.1016/j.jcrysgro.2012.01.007 ↗
12. High-quality multi-crystalline silicon (mc-Si) grown by directional solidification using notched crucibles10.1016/j.jcrysgro.2010.10.090 ↗
13. Seed-assisted growth of high-quality multi-crystalline silicon in directional solidification10.1016/j.jcrysgro.2013.09.051 ↗
14. Development of grain structures of multi- crystalline silicon from randomly orientated seeds in directional solidification10.1016/j.jcrysgro.2013.10.021 ↗
15. Comparison of defect formations in solar silicon growth from small random and large oriented seeds10.1016/j.jcrysgro.2015.02.087 ↗
16. The effect of silica nucleation layers on grain control of multi-crystalline silicon in directional solidification10.1016/j.jcrysgro.2014.06.047 ↗
17. Influence of back-diffusion of iron impurity on lifetime distribution near the seed-crystal interface in seed cast-grown monocrystalline silicon by numerical modeling10.1021/cg201465t ↗