Preparation of Ureido-palygorskite and its effect on the properties of urea-formaldehyde resin
Source abstract
Abstract
Abstract An Ureido-palygorskite (Ureido-PA) was developed by grafting γ-ureidopropyltriethoxysilane (UPTES) to PA to improve the performance of urea-formaldehyde resins (UF). The Ureido-PA was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and thermogravimetric-differential thermal (TG-DTA). UPTES was grafted onto the surface of palygorskite (PA) by chemical bonding. The effect of PA on the free formaldehyde content, the shear strength, and the water-resistance of UF resins was investigated. The free formaldehyde content of the composites was less than 1% and the shear strength was double of that of the pure UF resins when the dosage of Ureido-PA was 9% of net formaldehyde and urea (in total mass). The influences of PA on the thermal stability and the morphologies of the composites were also studied by derivative thermogravimetric (DTG) and transmission electron microscopy (TEM).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer composites and self-healing · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Effects of acidity of the particles and amount of hardener on the physical and mechanical properties of particleboard composite bonded with urea formaldehyde10.1016/j.ijadhadh.2009.12.006 ↗
2. Effects of urea formaldehyde resin to film properties of alkyd–melamine formaldehyde resins containing organo clay10.1016/j.porgcoat.2010.03.006 ↗
3. Decreasing formaldehyde emission from medium density fiberboard panels produced by adding different amine compounds to urea formaldehyde resin10.1016/j.ijadhadh.2011.06.011 ↗
4. Preparation and characterization of polyacrylamide/palygorskite10.1016/j.clay.2009.07.018 ↗
5. Urea-formaldehyde (UF) adhesive resins for wood10.1016/S0143-7496(97)00054-7 ↗
6. Effect of pH, ionic strength, temperature and humic substances on the sorption of Ni(II) to Na–attapulgite10.1016/j.cej.2008.12.024 ↗
7. Preparation and application of attapulgite/iron oxide magnetic composites for the removal of U(VI) from aqueous10.1016/j.jhazmat.2011.07.022 ↗
8. Controlled rate thermal analysis and differential scanning calorimetry of sepiolites and palygorskites10.1016/S0040-6031(02)00228-9 ↗
9. Attapulgite: its properties and applications10.1021/ie51403a012 ↗
10. Physicochemical characterization of asbestos and attapulgite mineral fibers before and after with treatment with phosphorus oxychloride10.1016/0040-6031(86)85098-5 ↗
11. Deposition behavior of hexamethydisiloxane films based on the FTIR analysis of Si―O―Si and Si―CH3 bonds10.1016/S0040-6090(97)00683-4 ↗
12. Formaldehyde and acetaldehyde adsorption properties of heat-treated rice husks10.1016/j.seppur.2007.12.006 ↗
13. Clay-reinforced epoxy nanocomposites10.1021/cm00048a006 ↗
14. Polyacrylamide grafted attapulgite (PAM-ATP) via surface-initiated atom transfer radical polymerization (SI-ATRP) for removal of Hg(II) ion and dyes10.1016/j.colsurfa.2006.02.052 ↗
15. Enthalpy relaxation of layered silicate-epoxy nanocomposites10.1002/macp.200350046 ↗
16. Preparation and characterization of waterborne polyurethane/attapulgite nanocomposites10.1016/j.eurpolymj.2007.06.031 ↗
17. Synthesis, characterization and thermal analysis of urea-formaldehyde/nanoSiO2 resins10.1016/j.tca.2011.10.007 ↗
18. Thermal behavior of modified urea-formaldehyde resins10.1007/s10973-010-1143-8 ↗
19. Structure and properties of fibrillar silicate/SBR composites by direct blend process10.1023/B:JMSC.0000004414.27574.93 ↗
20. Preparation and characterization of novel melamine modified poly(urea-formaldehyde) self-repairing microcapsules10.1016/j.colsurfa.2010.09.009 ↗
21. Optically active helical polyurethane@attapulgite composites: effect of optical purity of S-1,1′-binaphthyl-2,2′-diol on infrared emissivity10.1016/j.apsusc.2009.03.051 ↗
22. The effect of nano-filler on strength of the epoxy adhesive
23. Direct electrochemistry of cytochrome c on natural nano-attapulgite clay modified electrode and its electrocatalytic reduction for H2O210.1016/j.electacta.2006.10.020 ↗
24. Mechanical properties of attapulgite clay reinforced polyurethane shape-memory nanocomposites10.1016/j.eurpolymj.2009.04.004 ↗
25. Adsorption of reactive dyes from aqueous solution by silylated palygorskite10.1016/j.clay.2010.03.011 ↗
26. Core-shell attapulgite@polypyrrole composite with well-defined corn cob-like morphology via self-assembling and in situ oxidative polymerization10.1016/j.synthmet.2009.07.022 ↗
27. The role of charcoal on DTA curves of organo-clay complexes: an overview10.1016/j.clay.2003.04.002 ↗
28. Adsorption of Pb(II) from aqueous solution by chitosan-g-poly(acrylic acid)/attapulgite/sodium humate composites hydrogels10.1021/je900813z ↗