journal article·2015-10

The growth of Al2O3/YAG:Ce melt growth composite by the vertical Bridgman technique using an a-axis Al2O3 seed

Masafumi Yoshimura, Shin-ichi Sakata, Seiya Yamada, Toshinori Taishi, Keigo Hoshikawa

Publisher page

Abstract

Abstract Al 2 O 3 /Y 3 Al 5 O 12 (YAG):Ce melt growth composites (MGCs) were grown by the vertical Bridgman (VB) method using an a -axis [1120] Al 2 O 3 seed, and the crystallographic orientations and optical properties of the grown MGCs were investigated. It was found that a crack-free MGC ingot could be grown from the Al 2 O 3 seed. In the MGC grown using the Al 2 O 3 seed, the position of the seeding interface was almost the same to the initial position of the top of the seed. By means of electron backscatter diffraction (EBSD) analysis, it was found that the crystallographic orientation of the Al 2 O 3 phase in the grown MGC corresponded to the a -axis Al 2 O 3 seed, while YAG phases with several different orientations were observed. The light-conversion properties of the MGCs grown using an a axis Al 2 O 3 seed for application to white light emitting diodes (LEDs) were quite similar to those grown using an MGC seed. It was also found that it was possible to grow larger diameter, 2-in., Ce-doped MGC ingots with similar crystallographic properties with the VB method using a small Al 2 O 3 seed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Luminescence Properties of Advanced Materials · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Processing and mechanical properties of Al2O3/Y3Al5O12 (YAG) eutectic composite10.1002/9780470313053.ch36 ↗
2. A ductile ceramic eutectic composite with high strength at 1873K10.1038/37937 ↗
3. Oxide eutectic ceramic composites
4. High temperature strength and thermal stability for melt growth composite10.1016/j.jeurceramsoc.2005.01.030 ↗
5. Sapphire matrix composites reinforced with single-crystal YAG phases10.1007/BF00366367 ↗
6. High-temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite10.1023/A:1004377626345 ↗
7. Crystallographic orientation analysis and high temperature strength of melt growth composite10.1016/j.jeurceramsoc.2005.01.023 ↗
8. F. Schmid, D. Viechnicki, Seeding and growth of large ceramic eutectic ingots, in: Proceedings of the Conference on In Situ Composites, National Materials Advisory Board, 1972, pp. 119–125 (Session 2).
9. Crystallographic texture and orientation variants in Al2O3–Y3Al5O12 directionally solidified eutectic crystals10.1016/S0022-0248(01)01590-1 ↗
10. Microstructure of Al2O3/Y3Al5O12 eutectic fibers grown by μ-PD method10.1016/S0022-0248(98)01052-5 ↗
11. S. Sakata, Y. Waku, Ceramic composite material for optical conversion and use thereof, PTC WO 2004/065324 A1, 05.08.2004.
12. Durable, ultraluminous structure for incandescent, high-power white-LED10.1111/j.1744-7402.2006.02071.x ↗
13. Ce-doped Al2O3-YAG eutectic and its application for white LEDs10.1016/j.optmat.2013.05.035 ↗
14. Vertical Bridgman growth of Al2O3/YAG:Ce melt growth composite10.1016/j.jcrysgro.2015.01.008 ↗
15. Growth of langasite via Bridgman technique along [0 0 0 1], [2-1-10] and [0 1-1 1] for piezoelectric applications10.1016/j.jcrysgro.2004.07.072 ↗
16. Demonstration of crack-free c-axis sapphire crystal growth using the vertical Bridgman method10.1016/j.jcrysgro.2013.03.006 ↗
17. The assessment of thermodynamic parameters in the Al2O3–Y2O3 system and phase relations in the Y–Al–O system10.1034/j.1600-0692.2001.300308.x ↗
18. Eutectic solidification in the system Al2O3/Y3Al5O1210.1007/BF00555053 ↗