Pb(II) sorption on molecular sieve analogues of MCM-41 synthesized from kaolinite and montmorillonite
Source abstract
Abstract
Abstract Mesoporous molecular sieves were prepared with montmorillonite and kaolinite as silica sources, respectively, (denoted as P-M and P-K) by a hydrothermal method. The two prepared materials were characterized by XRD, FTIR and N2 adsorption–desorption. The results indicated that both P-M and P-K are typical mesoporous molecular sieves with high specific surface areas. Sorption of Pb(II) from aqueous solution to P-M and P-K was studied by using a batch technique. The effect of contact time, pH and temperature on the sorption of Pb(II) to P-M and P-K was investigated. A simplified surface complexation model was used to simulate the complexation of Pb(II) ions onto molecular sieves. The results suggested that sorption of Pb(II) was strongly dependent on pH values. Kinetics of sorption showed that the pseudo-second-order kinetic model held for the sorption process. Equilibrium modeling showed that the sorption of Pb(II) was fitted well by the Langmuir isotherm model. The thermodynamic parameters (ΔH°, ΔS°, and ΔG°) were calculated from the sorption of Pb(II) at three different temperatures of 283 K, 303 K and 333 K. The sorption reaction was endothermic and the process was favored at high temperature. The results indicated that both P-M and P-K are suitable materials for removal of Pb(II) from large volumes of aqueous solutions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mesoporous Materials and Catalysis · Adsorption and biosorption for pollutant removal · Zeolite Catalysis and Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Sorption characteristics of lead and cadmium in some soils of India10.1016/S0016-7061(02)00352-X ↗
2. Hydrothermal synthesis of MCM-41 using different ratios of colloidal and soluble silica10.1016/j.micromeso.2005.02.001 ↗
3. A new family of mesoporous molecular sieves prepared with liquid crystal templates10.1021/ja00053a020 ↗
4. Pb(II) uptake by kaolinite and montmorillonite in aqueous medium: influence of acid activation of the clays10.1016/j.colsurfa.2005.11.060 ↗
5. Pore classification in the characterization of porous materials: a perspective10.2478/s11532-007-0017-9 ↗
6. Adsorption of Ni(II) from aqueous solution using oxidized multi-walled carbon nanotubes10.1021/ie060791z ↗
7. Adsorption kinetic, thermodynamic and desorption studies of Th(IV) on oxidized multi-wall carbon nanotubes10.1016/j.colsurfa.2007.03.007 ↗
8. Surface complexation modeling of Sr(II) and Eu(III) adsorption onto oxidized multiwall carbon nanotubes10.1016/j.jcis.2008.04.046 ↗
9. Europium adsorption on multiwall carbon nanotube/iron oxide magnetic composite in the presence of polyacrylic acid10.1021/es803018a ↗
10. Synthesis of an ultralarge pore titanium silicate isomorphous to MCM-41 and its application as a catalyst for selective oxidation of hydrocarbons
11. Removal of lead(II) by mordenites10.1002/apj.5500060304 ↗
12. Thermodynamics of Pb2+ and Ni2+ adsorption onto natural bentonite from aqueous solutions10.1016/j.jcis.2005.01.045 ↗
13. Comparison of Ni2+ sorption to bare and ACT-graft attapulgites: effect of pH, temperature and foreign ions10.1016/j.susc.2007.12.007 ↗
14. Effect of pH, ionic strength, temperature and humic substances on the sorption of Ni(II) to Na-attapulgite10.1016/j.cej.2008.12.024 ↗
15. Sorption of Eu(III) on attapulgite studied by batch, XPS and EXAFS techniques10.1021/es901241f ↗
16. Removal of Cd(II), Zn(II) and Pb(II) from aqueous solutions by brown marine macro algae: kinetic modeling10.1016/j.jhazmat.2007.08.081 ↗
17. Interaction of metal ions with clays: I. A case study with Pb(II)10.1016/j.clay.2005.03.008 ↗
18. Immobilization of Pb(II), Cd(II) and Ni(II) ions on kaolinite and montmorillonite surfaces from aqueous medium10.1016/j.jenvman.2007.01.048 ↗
19. Removal of Ni(II), Cd(II), and Pb(II) from a ternary aqueous solution by amino functionalized mesoporous and nano mesoporous silica10.1016/j.cej.2009.06.016 ↗
20. Plasma induced grafting of cyclodextrin onto multiwall carbon nanotube/iron oxides for adsorbent application10.1021/jp911424k ↗
21. Synthesis of MCM-41 from coal fly ash by a green approach: influence of synthesis pH10.1016/j.jhazmat.2006.03.050 ↗
22. Mesoporous molecular sieves MCM-41 prepared from post-Mg-extraction sepiolite
23. Removal of Cu(II), Pb(II), and Ni(II) by adsorption onto activated carbon cloths10.1021/la0004810 ↗
24. Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism10.1038/359710a0 ↗
25. Adsorption thermodynamic, kinetic and desorption studies of Pb2+ on carbon nanotubes10.1016/j.watres.2004.11.004 ↗
26. Evaluating pore sizes in mesoporous materials: a simplified standard adsorption method and a simplified Broekhoff–de Boer method10.1021/la990209u ↗
27. Cadmium(II) and zinc(II) adsorption by the aquatic moss Fontinalis antipyretica: effect of temperature, pH and water hardness10.1016/j.watres.2003.10.013 ↗
28. Lead removal in fixed-bed columns by zeolite and sepiolite10.1016/j.chemosphere.2005.02.036 ↗
29. Sorption of Sr(II) and Eu(III) onto pyrite under different redox potential conditions10.1016/j.jcis.2005.06.049 ↗
30. Amino acid adsorption onto mesoporous silica molecular sieves10.1016/j.seppur.2005.07.007 ↗
31. Removal of Pb2+, Cu2+, and Fe3+ from attery manufacture wastewater by chitosan produced from silkworm chrysalides as a low-cost adsorbent10.1016/j.reactfunctpolym.2007.10.028 ↗
32. Preparation, characterization, and Zn2+ adsorption behavior of chemically modified MCM-41 with 5-mercapto-1-methyltetrazole10.1016/j.jcis.2007.04.063 ↗
33. Equilibrium, kinetic and thermodynamic studies of adsorption of Pb(II) from aqueous solution onto Turkish kaolinite clay10.1016/j.jhazmat.2007.03.078 ↗
34. Removal of Eu(III) from aqueous solution using ZSM-5 zeolite
35. Photocatalytic reduction of Cr(VI) to Cr(III) in solution containing ZnO or ZSM-5 zeolite using oxalate as model organic compound in environment
36. Modeling of radionickel sorption on MX-80 bentonite as a function of pH and ionic strength10.1007/s11426-008-0145-x ↗
37. SDBS modified XC-72 carbon for the removal of Pb(II) from aqueous solutions10.1002/ppap.201000005 ↗
38. Adsorption of Pb(II) on diatomite as affected via aqueous solution chemistry and temperature10.1016/j.colsurfa.2009.02.016 ↗
39. Adsorption of copper(II) on multiwalled carbon nanotubes in the absence and presence of humic or fulvic acids10.1016/j.jhazmat.2010.01.084 ↗
40. Determination of framework aluminium content in dealuminated Y-type zeolites: a comparison based on unit cell size and wavenumber of i.r. bands10.1016/0144-2449(86)90054-0 ↗
41. Sorption of Pb(II) on Na-rectorite: effects of pH, ionic strength, temperature, soil humic acid and fulvic acid10.1016/j.colsurfa.2008.06.022 ↗
42. Sorption of Ni2+ on Na-rectorite studied by batch and spectroscopy methods10.1016/j.apgeochem.2008.07.008 ↗
43. Eu(III) sorption to TiO2 (anatase and rutile): batch, XPS, and EXAFS study10.1021/es803431c ↗
44. Lead exposure through drinking water: lessons to be learned from recent U.S. experience
45. Isopropylation of m-Cresol over mesoporous Al-MCM-41 molecular sieves10.1006/jcat.2002.3709 ↗
46. EXAFS analysis of cadmium(II) adsorption to kaolinite10.1016/j.chemgeo.2008.01.001 ↗
47. Adsorption characteristic of acidified carbon nanotubes for heavy metal Pb(II) in aqueous solution Mater10.1016/j.msea.2007.02.097 ↗
48. Modeling of lead adsorption on kaolinite
49. Modeling Pb(II) adsorption onto sandy loam soil10.1016/j.jcis.2003.11.051 ↗
50. Crystallization and morphology of zeolite MCM-22 influenced by various conditions in the static hydrothermal synthesis10.1016/j.micromeso.2007.09.022 ↗
51. Adsorption separation of carbon dioxide from flue gas of natural gas-fired boiler by a novel nanoporous “molecular basket” adsorbent10.1016/j.fuproc.2005.01.002 ↗
52. Adsorption of Pb(II) from aqueous solution to MX-80 bentonite: effect of pH, ionic strength, foreign ions and temperature10.1016/j.clay.2007.09.004 ↗
53. Adsorption and desorption of Ni2+ on Na-montmorillonite: effect of pH, ionic strength, fulvic acid, humic acid and addition sequences10.1016/j.clay.2007.05.006 ↗
54. Synthesis of Beta/MCM-41 composite molecular sieve with high hydrothermal stability in static and stirred condition10.1016/j.jcis.2008.10.002 ↗
55. Sorption of Ni(II) on GMZ bentonite: effects of pH, ionic strength, foreign ions, humic acid and temperature10.1016/j.apradiso.2009.03.118 ↗
56. Adsorption behavior of Pb(II) on montmorillonite10.1016/j.colsurfa.2008.01.038 ↗
57. Sorption of copper(II) onto super-adsorbent of bentonite–polyacrylamide composites10.1016/j.jhazmat.2009.08.135 ↗
58. Use of cetyltrimethylammonium bromide–bentonite to remove organic contaminants of varying polar character from water10.1021/es980353m ↗