Characterization on the occurrence state of nitrogen getter Ti in HPHT grown synthetic diamond crystals
Source abstract
Abstract
Type IIa diamonds are the most promising gem grade, optical and electronic grade materials with high quality and low defects, however natural type IIa diamonds are rare and therefore the synthetic methods to obtain the high quality type IIa diamonds have been a hot issue. Nitrogen getters play a crucial role in the synthesis of type IIa high temperature high pressure (HPHT) diamonds crystals by reacting with the nitrogen in the system and effectively removing it from the growth process. However, the occurrence state of nitrogen getter introduced after diamond crystal growth remains to be investigated. In this study, a group of HPHT synthetic diamond crystals with different mass fractions of Ti as a nitrogen getter were examined by scanning electron microscopy coupled with energy dispersive spectrometer (SEM-EDS) and X-ray fluorescent spectroscopy (micro-XRF) to observe the occurrence state of the nitrogen getter Ti within the synthetic diamond crystal, it was found that at the end of crystal growth, There are two forms of Ti present in the process: (i) Ti reacts with C to form TiC, which was deposited on the surface of the diamond crystal in the dendritic pattern, and (ii) Ti enters the diamond crystal to form metallic inclusions. This study provides reliable data to support a comprehensive analysis of the effect of Ti as a nitrogen getter in the growth procession of HPHT synthetic diamond crystal, and it will have a positive effect on the development of synthetic diamond technology.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · High-pressure geophysics and materials · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Current status of Chinese synthetic diamonds10.15506/JoG.2019.36.8.748 ↗
2. Morphological and Surface Microtopographic Features of HPHT-Grown. Diamond Crystals with Contact Twinning10.3390/cryst12091264 ↗
3. The catalysts of synthetic gem-quality HPHT diamonds and their impact on diamond quality: A case study of synthetic diamonds from three Chinese companies
4. Fullerenes as a co-catalyst for high pressure – high10.1016/j.diamond.2004.08.001 ↗
5. Synthesis of diamond with high nitrogen concentration from powder catalyst-C-additive NaN3, by HPHT10.1016/j.carbon.2005.10.018 ↗
6. SiC enhanced nucleation of diamond under high pressure and high temperature10.1016/0925-9635(96)00533-X ↗
7. Effect of additive zinc on larger diamond crystal growth
8. Growth of Synthetic Gem Di amonds in NiMnCo-Cu-C Systeme
9. Synthesis of Diamond Using Powder Catalyst with Sulphur Additive
10. Research status of diamond catalyst
11. Chinese Colorless HPHT Synthetic Diamond Inclusion Features and Identification10.3390/cryst12091266 ↗
12. Spectral Characteristic of Natural and HPHT-Grown Type Ib Diamonds
13. A Synthetic method for gem-grade colorless Diamond [P]
14. S.Y. Wang, D.S. Wang, Z.C. Yuan. Preparation method of high grade colorless diamond. China Patent: CN107321269A,2017.11.07.
15. Q.K. Liu, F.L. Zhang, Y.H. Bao, et al. Preparation method of raw material core column for Colorless diamond synthesis. China Patent: CN107324329B,2017.11.07.
16. effect of alloying elements on solubility of nitrogen in liquid iron-chromium-nickel alloys
17. Nitrogen Solubility in Liquid Ni-V, Ni-Ta, Ni-Cr-V, and Ni-Cr-Ta Alloys10.3390/met9111184 ↗
18. The effect of adding Cu on the nitrogen removal efficiency of Ti for the synthesis of a large type IIa diamond under high temperature and high pressure10.1016/S1872-5805(20)60509-1 ↗
19. High-pressure synthesis of high-purity diamond crystal10.1016/0925-9635(96)00559-6 ↗
20. The composition of the fluid phase in inclusions in synthetic HPHT diamonds10.1038/s41598-022-05153-7 ↗
21. Reaction sintering of diamond using a binary solvent-catalyst of the iron-titanium system10.1007/BF01132403 ↗
22. Further studies on diamond growth rates and physical properties of laboratory-made diamond10.1021/j100681a014 ↗
23. Growth-sector dependence of optical features in large synthetic diamonds10.1016/0022-0248(90)90126-6 ↗
24. Surface structures of synthetic diamonds10.1007/BF00550541 ↗
25. Growth characteristics of type IIa large single crystal diamond with Ti/Cu as nitrogen getter in FeNi-C system10.1088/1674-1056/ab592f ↗
26. Characterization of Growth Hillocks on the Surface of High-Pressure Synthetic Diamond[J]10.1088/0256-307X/19/11/341 ↗
27. Fluid CH4 and H2 trapped around metallic inclusions in HPHT synthetic diamond10.1016/j.diamond.2016.05.010 ↗
28. Gemologic and Spectroscopy Properties of Chinese High-Pressure High-Temperature Synthetic Diamond10.1007/s11837-019-03592-8 ↗
29. On the existence of positively charged single-substitutional nitrogen in diamond[J]10.1088/0953-8984/10/27/016 ↗
30. Zaitsev · 2001
31. Multiphoton resonances in nitrogen-vacancy defects in diamond10.1103/PhysRevA.100.013852 ↗
32. Growth of Large High-Quality Type-II a Diamond Crystals10.1088/0256-307X/22/7/066 ↗
33. Tang · 2009
34. Growth rate of high-quality large diamond crystals10.1016/S0022-0248(01)02145-5 ↗
35. Li · 2009
36. Hafnium nitride with thorium phosphide structure: Physical properties and an assessment of the Hf-N, Zr-N, and Ti-N phase diagrams at high pressures and temperatures (Article)[J]10.1103/PhysRevLett.90.125501 ↗