journal article·2005-01

Thermal behaviour of Cu–Mg–Mn and Ni–Mg–Mn layered double hydroxides and characterization of formed oxides

František Kovanda, Tomáš Grygar, Vít Dorničák, Tomáš Rojka, Petr Bezdička, Květa Jirátová

Applied Clay Science· Volume 28· Issue 1-4
Publisher page

Abstract

Abstract Thermal behaviour of synthetic Cu–Mg–Mn and Ni–Mg–Mn layered double hydroxides (LDHs) with M II /Mg/Mn molar ratio of 1:1:1 was studied in the temperature range 200–1100 °C by thermal analysis (TG/DTA/EGA), powder X-ray diffraction (XRD), Raman spectroscopy, and voltammetry of microparticles. Powder XRD patterns of prepared LDHs showed characteristic hydrotalcite-like phases, but further phases were indirectly found as admixtures. The Cu–Mg–Mn precipitate was decomposed at temperatures up to ca. 200 °C to form an XRD-amorphous mixture of oxides. The crystallization of CuO (tenorite) and a spinel type mixed oxide of varying composition Cu x Mg y Mn z O 4 with Mn 4+ was detected at 300–500 °C. At high temperatures (900–1000 °C), tenorite disappeared and a consecutive crystallization of 2CuO·MgO (gueggonite) was observed. The high-temperature transformation of oxide phases led to a formation of Cu I oxides accompanied by oxygen evolution. The DTA curve of Ni–Mg–Mn sample exhibited two endothermic effects characteristic for hydrotalcite-like compounds. The first one with minimum at 190 °C can be ascribed to a loss of interlayer water, the second one with minimum at 305 °C to the sample decomposition. Heating of the Ni–Mg–Mn sample at 300 °C led to the onset of crystallization of oxide phases identified as Ni x Mg y Mn z O 4 spinel, (Ni,Mg)O oxide containing Mn 4+ cations, and easily reducible XRD-amorphous species, probably free Mn III,IV oxides. At 600 °C (Raman spectroscopy) and 700 °C (XRD), the (Ni,Mg) 6 MnO 8 oxide with murdochite structure together with spinel phase were detected. Only spinel and (Ni,Mg)O were found after heating at 900 °C and higher temperatures. Temperature-programmed reduction (TPR) profiles of calcined Cu–Mg–Mn samples exhibited a single reduction peak with maximum around 250 °C. The highest H 2 consumption was observed for the sample calcined at 800 °C. The reduction of Ni–Mg–Mn samples proceeded by a more complex way and the TPR profiles reflected the phase composition changing depending on the calcination temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Magnesium Oxide Properties and Applications · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Preparation and study of Cu–Al mixed oxides via hydrotalcite-like precursors10.1021/cm980500f ↗
2. Synthesis and characterization of new hydrotalcite-like compounds containing Ni(II) and Mn(III) in the hydroxide layers and of their calcination products10.1006/jssc.1996.0227 ↗
3. Hydrotalcite decomposition mechanism: a clue to the structure and reactivity of spinel-like mixed oxides10.1021/jp960040i ↗
4. Hydrotalcite type anionic clays: preparation, properties, and applications10.1016/0920-5861(91)80068-K ↗
5. Quintinite-2H, quintinite-3T, charmarite-2H, charmarite-3T and caresite-3T, a new group of carbonate minerals related to the hydrotalcite-manasseite group
6. An X-ray diffraction study of phases in the system CuO–NiO–MgO at 1000 °C10.1149/1.2123819 ↗
7. Layered double hydroxides: synthesis and post-synthesis modification
8. Desautelsite, a new mineral of the pyroaurite group
9. Investigation of electronically conducting oxide systems: XX. MgNiMnO4 and properties of MgzNiMn2−zO410.1016/0925-8388(91)90065-4 ↗
10. Preparation and thermal stability of manganese-containing hydrotalcite, [Mg0.75Mn0.04IIMn0.21III(OH)2] (CO3)0.11·nH2O10.1039/JM9940401117 ↗
11. Total oxidation catalysts based on manganese or copper oxides and platinum or palladium: I. Characterization10.1016/S0926-860X(98)00326-3 ↗
12. Electrochemical analysis of solids. A review10.1135/cccc20020163 ↗
13. Voltammetric and X-ray diffraction analysis of early stages of thermal crystallization of mixed Cu,Mn-oxides10.1007/s10008-003-0439-z ↗
14. Formation of synthetic analogues of double metal-hydroxy carbonate minerals under controlled pH conditions: II. The synthesis of desautelsite10.1180/claymin.1991.026.4.06 ↗
15. Decarbonation behavior of Mg–Al–CO3 hydrotalcite-like compounds during heat treatment10.1346/CCMN.1995.0430405 ↗
16. Thermal conversion of a layered (Mg/Al) double hydroxide to the oxide10.1039/jm9950500323 ↗
17. Thermal behaviour of hydrotalcite-like compounds: study of the resulting oxidic forms10.1016/S1466-6049(00)00019-2 ↗
18. Fourier transform infrared and Raman spectroscopic study of the local structure of Mg-, Ni-, and Co-hydrotalcites10.1006/jssc.1999.8413 ↗
19. Characterization of activated Cu/Mg/Al hydrotalcites and their catalytic activity in toluene combustion10.1016/S0169-1317(00)00032-6 ↗
20. Thermal behaviour of Ni–Mn layered double hydroxide and characterization of formed oxides10.1016/S1293-2558(03)00129-8 ↗
21. Raman spectroscopy of AMn2O4 (A=Mn, Mg, and Zn) spinels10.1039/b203520k ↗
22. In situ Fourier transform infrared and laser Raman spectroscopic study of the thermal decomposition of Co–Al and Ni–Al hydrotalcites10.1016/S0924-2031(01)00119-9 ↗
23. The nature of the thermal decomposition of a catalytically active anionic clay mineral10.1016/0021-9517(86)90262-9 ↗
24. Study of layered double hydroxides by thermal methods
25. Crystal structure and magnetic properties of (Ni1−xMgx)6MnO810.1006/jssc.1995.1318 ↗
26. Preparation and catalytic properties of cationic and anionic clays10.1016/S0920-5861(98)00038-8 ↗
27. Synthesis and physicochemical properties of a new copper–manganese–aluminium ternary hydrotalcite-like compound10.1007/BF00636192 ↗
28. Effect of manganese substitution on the physicochemical properties and catalytic toluene oxidation activities of Mg–Al layered double hydroxides10.1016/S1387-1811(99)00123-7 ↗