journal article·2023-02Open access

Hypo-peritectic TRIS–NPG in a stationary temperature gradient: Thermodynamics, grain boundary migration and phase identification

A. Ludwig, J. Mogeritsch, V.T. Witusiewicz

Abstract

At a stationary temperature gradient, the grain boundaries comprising residual melt can migrate. Their migration is governed by liquid diffusion and, in multiphase materials, depends highly on the phases present. Therefore, this phenomenon can be used for phase identification if data on metastable extensions of the corresponding phase diagram are available. Thus, we re-optimised the thermodynamic description of Tris(hydroxymethyl)aminomethane-Neopentylglycol (TRIS–NPG), a transparent peritectic alloy often used as a model alloy for metallic solidification, and used the predicted metastable liquidus and solidus curves to evaluate the grain boundary migration observations. As we found temperature gradient zone melting (TGZM) at low temperatures, the presence of the peritectic phase could be excluded even though a near-peritectic alloy had been processed. The liquid diffusivity, as a function of the position/temperature, was estimated from the TGZM velocity measurements. The data suggest that the diffusion coefficient deep in the mush is one order of magnitude smaller than that close to the liquidus temperature. This may be typical for non-dilute alloys, where the concentration of the intergranular liquid changes considerably.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Studies on solid–solid phase transitions of polyols by infrared spectroscopy10.1016/S0040-6031(99)00403-7 ↗
2. Study of the phase transitions in the binary system NPG-TRIS for thermal energy storage applications10.3390/ma13051162 ↗
3. Npg–tris thermal storage system. Quantification of the limiting processes: Sublimation and water’s adsorption10.3390/cryst11101200 ↗
4. Degree of miscibility between non-isomorphous plastic phases: Binary system NPG (neopentyl glycol)-TRIS [tris(hydroxymethyl)aminom10.1039/JM9950500431 ↗
5. Thermodynamic reassessment of the novel solid-state thermal energy storage materials: Ternary polyalcohol and amine system pentaglycerine-tris(hydroxymethyl)-amino-methane-neopentylglycol (PG-TRIS-NPG)10.1016/j.calphad.2017.08.003 ↗
6. On/off directional solidification of near peritectic TRIS-NPG with a planar but tilted solid/liquid interface under microgravity conditions10.1016/j.scriptamat.2022.114683 ↗
7. A. Ludwig, J. Mogeritsch, Observation of peritectic couple growth for a hyper-peritectic alloy under microgravity conditions, in: IOP Conf. Ser. Mater. Sci. Eng., 2022: p. in print.10.2139/ssrn.4354681 ↗
8. J. Mogeritsch, W. Sillekens, A. Ludwig, In-situ Observation of Coupled Growth Morphologies in Organic Peritectics under Pure Diffusion Conditions, in: Miner. Met. Mater. Ser. B. Ser., 2022: pp. 1429–1441. 10.1007/978-3-030-92381-5_136.10.1007/978-3-030-92381-5_136 ↗
9. In situ and real-time analysis of TGZM phenomena by synchrotron X-ray radiography10.1016/j.jcrysgro.2008.01.041 ↗
10. Quantitative analysis by in situ synchrotron X-ray radiography of the evolution of the mushy zone in a fixed temperature gradient10.1016/j.jcrysgro.2014.10.053 ↗
11. Evolution of a mushy zone in a static temperature gradient using a volume average approach10.1016/j.actamat.2017.09.011 ↗
12. Phase field and analytical study of mushy zone solidification in a static thermal gradient: From dendrites to planar front10.1016/j.actamat.2016.09.053 ↗
13. Preparation of the initial solidliquid interface and melt in directional solidification of Al18 at%Ni peritectic alloy10.1016/j.jcrysgro.2010.05.018 ↗
14. An analysis of non-equilibrium peritectic reaction driven by solute diffusion under a temperature gradient10.1016/j.jcrysgro.2011.08.034 ↗
15. Local melting/solidification during peritectic solidification in a steep temperature gradient: Analysis of a directionally solidified Al-25at%Ni10.1007/s00339-014-8336-0 ↗
16. Thermodynamic assessment of binary systems Tris(hydroxymethyl)aminomethane-Pentaglycerine (TRIS-PG) and 2-amino-2-methyl-1,3-propanediol-Pentaglycerine (AMPL-PG) phase diagrams10.1016/j.calphad.2016.01.006 ↗
17. V.T. Witusiewicz, L. Sturz, U. Hecht, S. Rex, Thermodynamic description and unidirectional solidification of eutectic organic alloys: II. (CH3)2C(CH2OH) 2-(NH2)(CH3)C(CH2OH)2 system, Acta Mater. 52 (2004) 5071–5081. 10.1016/j.actamat.2004.07.013.10.1016/j.actamat.2004.07.013 ↗
18. Temperature gradient zone melting
19. Migration of a liquid zone through a solid10.1063/1.1729806 ↗
20. D.J. Allen, J.D. Hunt, Temperature gradient zone melting and microsegregation in castings, in: Int. Conf. Solidif. Cast. 1. London Inst. Met., 1977: pp. 39–43.
21. Measurement of liquid diffusion coefficients in the Al-Cu system using temperature gradient zone melting10.1007/BF02646884 ↗
22. Determination of the Solute Diffusion Coefficient by the Droplet Migration Method10.1007/s11661-007-9164-z ↗
23. J. Mogeritsch, Investigation on peritectic solidification using a transparent organic system, Ph.D. Thesis, Montanuniversitaet Leoben, AUT, 2012.
24. Investigation of using different thermodynamic models on prediction ability of mutual diffusion coefficient model10.1016/j.molliq.2017.08.069 ↗