journal article·2002-09

Growth of dendrites in a rapidly solidified Al-23 Sr alloy

Zhonghua Zhang, Xiufang Bian, Yan Wang

Journal of Crystal Growth· Volume 243· Issue 3-4
Publisher page

Abstract

Abstract The microstructure of the melt-spun Al-23 wt% Sr alloy has been investigated using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The phases present in the melt-spun Al-23 Sr alloy are identified to be α-Al and Al 4 Sr, identical to those in the ingot-cast alloy. Rapid solidification has a marked effect on the morphology of the primary Al 4 Sr phase and the preferred orientations of its dendrites in the Al-23 Sr alloy. The primary Al 4 Sr phase in the melt-spun Al-23 Sr alloy is dendritic, quite different from the coarse slab-like Al 4 Sr in the ingot-cast alloy. Some primary Al 4 Sr dendrites develop into secondary branches in directions 45° to the dendrite trunks but others continue to branch in the directions perpendicular to the trunks. Moreover, tertiary and higher-order branches are also observed in the melt-spun Al-23 Sr alloy. The preferred crystallographic orientations of the Al 4 Sr dendrites with 45° and 90° branches are determined to be the 〈1 0 0〉 and 〈1 1 0〉 directions, respectively. Rapid solidification enhances the formation of the Al 4 Sr dendrites with 45° branches in the 〈1 0 0〉 direction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Chang · J. Mater. Sci. Lett. · 2000 · 19 · 19710.1023/A:1006746321922 ↗
2. B. Heshmatpour, In: R. Huglen (Ed.), Light Metals, TMS, Warrendale, 1997, p. 801.
3. Emadi · Metall. Trans. B · 1993 · 24 · 105510.1007/BF02660997 ↗
4. Qin · Chin. J. Mater. Res. · 1999 · 13 · 162
5. P.C. van Wiggen, in: U. Mannweiler (Ed.), Light Metals, TMS, Warrendale, 1994, p. 1057.
6. Jones · J. Mater. Sci. · 1984 · 19 · 104310.1007/BF01120015 ↗
7. R.W.K. Honeycombe, B. Cantor (Eds.), Rapidly Quenched Metals III, Vol. 1, The Metals Society, London, 1978.
8. Majumdar · Mater. Sci. Eng. A · 1993 · 169 · 13510.1016/0921-5093(93)90608-H ↗
9. Duwez · J. Appl. Phys. · 1960 · 31 · 113610.1063/1.1735777 ↗
10. Duwez · Nature · 1960 · 187 · 869
11. Anantharaman · 1987
12. Bian · J. Mater. Sci. · 1998 · 33 · 9910.1023/A:1004345613257 ↗
13. Z.H. Zhang, X.F. Bian, Y. Wang, Mater. Sci. Technol., accepted for publication.
14. Alcock · Bull. Alloy Phase Diag. · 1989 · 10 · 68410.1007/BF02877629 ↗
15. Alcock · Bull. Alloy Phase Diag. · 1989 · 10 · 62410.1007/BF02877629 ↗
16. Kurz · 1992
17. Perepezko · Mater. Sci. Eng. A · 1994 · 179/180 · 5210.1016/0921-5093(94)90163-5 ↗
18. S. Henry, P. Jarry, M. Rappaz, In: J. Beech, H. Jones (Eds.), Solidification Processing 1997, University of Sheffield, Sheffield, 1997, pp. 660–664.
19. L. Zhang, M.O. Pekguleryuz, Light Metals 1997, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, 1997, pp. 385–392.
20. M. Rappaz, S. Henry, Solidification 1999, Minerals, Metals and Materials Society/AIME, Warrendale, 1999, pp. 131–141.
21. Henry · Mater. Sci. Forum · 2000 · 329–330 · 6510.4028/www.scientific.net/MSF.329-330.65 ↗
22. Anada · J. Jpn. Inst. Light Met. · 1975 · 36 · 56210.2464/jilm.36.562 ↗