Mechanical properties of defective kaolinite in tension and compression: A molecular dynamics study
Source abstract
Abstract
Influenced by the external environment, clays often contain a large number of lattice defects inside, and the defects have an essential influence on the physical and mechanical properties of clays. In order to reveal the mechanical properties and deformation failure mechanism of defective kaolinite, kaolinite containing Si vacancy defects was constructed, and the mechanical properties of two types of perfect/defective kaolinite were investigated under uniaxial tensile and compressive conditions, respectively, by using molecular dynamics methods. The anisotropy of the micromechanical behavior of kaolinite and the formation mechanism was revealed. Based on the radial distribution function between atoms, the cutoff distance of individual bonds inside the crystal was determined, and the evolution rules of individual bonds inside the crystal during the deformation and destruction were elucidated. Results showed that the introduction of point defects caused different degrees of reduction in the peak strength and elastic modulus of kaolinite, and the decrease was related to the loading direction, and the decline was more significant for parallel clay layers (x- and y-) than for perpendicular clay layers (z-), with pronounced anisotropy. When the defected kaolinite was extended along the x- and y-directions, the silicon‑oxygen tetrahedral and aluminum‑oxygen octahedral sheets were fractured, and the broken sites were concentrated at the defected locations; when extended along the z-direction, the failure was dominated by the fracture of interlayer hydrogen bonds. When the defective kaolinite was compressed along the x- and y-directions, the failure was mainly caused by the gradual accumulation of the bending of the clay layer, which was distinctly different from the direct fracture under the tensile condition, and when compressed along the z-direction, the clay layer collapsed until it was failure. The tendency of the broken bonds within kaolinite corresponded well with the stress-strain curve, the number of broken bonds increased with the increase of strain, and the number of broken bonds of various bonds stabilized when the crystal structure was destroyed. The bond-break types and the number of bonds broken under different simulation conditions were somewhat different, affected by the layered structure of kaolinite and the loading patterns.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Soil and Unsaturated Flow · Landslides and related hazards · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Effect of pressure on kaolinite nanomorphology under wet and dry conditions: correlation with other kaolinite properties10.1016/j.clay.2009.08.004 ↗
2. Melting behaviour under pressure of Kaolinite Clay: a nanoscale study10.3390/min13050679 ↗
3. Realizability of negative Pore compressibility in poroelastic composites10.1115/1.2896042 ↗
4. Rietveld refinement of non-hydrogen atomic positions in Kaolinite10.1346/CCMN.1989.0370401 ↗
5. Effect of diagenesis on geomechanical properties of organic-rich calcareous shale: a multiscale investigation10.1029/2020JB021365 ↗
6. The mechanical behaviour of weak mudstone (Opalinus Clay) at low stresses10.1016/j.ijrmms.2006.06.004 ↗
7. Water adsorption on Kaolinite surfaces containing trenches10.1021/jp910045u ↗
8. Molecular models of hydroxide, oxyhydroxide, and clay phases and the development of a general force field10.1021/jp0363287 ↗
9. Particle mesh Ewald: an N·log(N) method for Ewald sums in large systems10.1063/1.464397 ↗
10. Effect of microstructure on hydric strain in clay rock: a quantitative comparison10.1016/j.clay.2019.105244 ↗
11. Understanding molecular simulation10.1063/1.4822570 ↗
12. Molecular insights into the temperature and pressure dependence of mechanical behavior and dynamics of Na-montmorillonite clay10.1039/D3NA00365E ↗
13. A simple and effective way to evaluate the accuracy of digital image correlation combined with scanning electron microscopy (SEM-DIC)
14. Insight on bulk shear strength parameters of clay using discrete element approach incorporating physics-based interparticle force model10.1016/j.sandf.2022.101250 ↗
15. A molecular dynamics study on the structural and mechanical properties of hydrated kaolinite system under tension10.1088/2053-1591/ab2562 ↗
16. Canonical dynamics: Equilibrium phase-space distributions10.1103/PhysRevA.31.1695 ↗
17. Dynamic behaviors of overconsolidated clay under cyclic confining pressure10.1061/(ASCE)GM.1943-5622.0002566 ↗
18. The Fourier transform infrared spectroscopy (FTIR) analysis for the clay mineralogy studies in a clastic reservoir10.1007/s13202-021-01449-y ↗
19. Fired shards from selected ancient Anatolian ceramics: a brief review of their mineralogical nature and pedological-microstructural evolution10.55730/1300-0985.1861 ↗
20. Modeling the response of pyrophyllite interlayer to applied stress using steered molecular dynamics10.1346/CCMN.2005.0530207 ↗
21. Influence of structural Al and Si vacancies on the interaction of kaolinite basal surfaces with alkali cations: a molecular dynamics study10.1016/j.commatsci.2017.09.004 ↗
22. Stacking defects and long-period polytypes in kaolin minerals from a hydrothermal deposit10.1127/0935-1221/2005/0017-0465 ↗
23. The role of clays, clay minerals and clay-based materials for nitrate removal from water systems: a review10.1016/j.clay.2019.105377 ↗
24. Promoting the Adsorption of Metal Ions on Kaolinite by defect Sites: a Molecular Dynamics Study
25. Mechanism of kaolinite sheets curling via the intercalation and delamination process10.1016/j.jcis.2014.12.039 ↗
26. Interactions between microorganisms and clay minerals: New insights and broader applications10.1016/j.clay.2019.04.025 ↗
27. Insights into the influence mechanism of different interlayer cations on the hydration activity of montmorillonite surface: a DFT calculation10.1016/j.clay.2023.106965 ↗
28. Orientational mapping of minerals in Pierre shale using X-ray diffraction tensor tomography10.1107/S205225252100587X ↗
29. Adsorption behaviour of pollutants: Heavy metals, radionuclides, organic pollutants, on clays and their minerals (raw, modified and treated): a review10.1016/j.jenvman.2022.114685 ↗
30. A review on the application of clay minerals as heavy metal adsorbents for remediation purposes10.1016/j.eti.2020.100692 ↗
31. Formation of alteration zones and kaolin genesis, Limnos Island, Northeast Aegean Sea, Greece10.1180/claymin.2008.043.4.08 ↗
32. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
33. Effects of pore and differential pressure on compressional wave velocity and quality factor in Berea and Michigan sandstones10.1190/1.1444217 ↗
34. Atomic Structure, Electronic and Mechanical Properties of Pyrophyllite under pressure: a First-Principles Study10.3390/min10090778 ↗
35. Kaolin group minerals under pressure: the study of their structural and electronic properties by DFT methods10.1016/j.clay.2022.106444 ↗
36. First-principles studies on the elastic constants of a 1:1 layered kaolinite mineral10.2138/am.2005.1832 ↗
37. Prediction of mechanical properties of grafted kaolinite – a DFT study10.1016/j.clay.2020.105692 ↗
38. DFT Study of Electronic Structure and Optical Properties of Kaolinite, Muscovite, and Montmorillonite10.3390/cryst11060618 ↗
39. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
40. Effect of clay type and content on the mechanical properties of clayey silt hydrate sediments
41. Exfoliation/delamination of kaolinite by low-temperature washing of kaolinite–urea intercalates10.1016/j.clay.2006.07.001 ↗
42. Effective elastic properties of solid clays10.1190/1.1444934 ↗
43. The effect of Mg, Fe(II), and Al Doping on CH4: Adsorption and Diffusion on the Surface of Na-Kaolinite (001) by Molecular Simulations
44. Relationship between crystal structure and thermo-mechanical properties of kaolinite clay: beyond standard density functional theory10.1039/C5DT00590F ↗
45. Effect of water content and structural anisotropy on tensile mechanical properties of montmorillonite using molecular dynamics10.1016/j.clay.2022.106622 ↗
46. Tensile strength identification of remolded clayey soils10.1007/s10064-022-02879-6 ↗
47. Atomistic study on thermo-mechanical behavior and structural anisotropy of montmorillonite under triaxial tension and compression10.1016/j.clay.2023.106817 ↗
48. Engineering behavior of soft rock tunnels in mountainous areas under multiple hazard inducers: a case study of the Jiuzhaigou-Mianyang Expressway10.1007/s10064-022-02805-w ↗
49. Microscopic phase identification of cement-stabilized clay by nanoindentation and statistical analytics10.1016/j.clay.2022.106531 ↗
50. Defect and temperature effects on the mechanical properties of kaolinite: a molecular dynamics study10.1180/clm.2019.22 ↗
51. Deformation and failure processes of kaolinite under tension: Insights from molecular dynamics simulations
52. Nanoscale mechanical behavior of kaolinite under uniaxial strain conditions10.1016/j.clay.2020.105961 ↗
53. Construction and validation of the upscaling model of organic-rich shale by considering water-sensitivity effects10.1016/j.petrol.2022.110718 ↗
54. Effect of Mg(II) and Na(I) Doping on the Electronic Structure and Mechanical Properties of Kaolinite10.3390/min10040368 ↗
55. Insight of molecular simulation to better assess deformation and failure of clay-rich rocks in compression and extension10.1016/j.ijrmms.2020.104589 ↗
56. New insights into the capture performance and mechanism of hazardous metals Cr3+ and Cd2+ onto an effective layered double hydroxide based material10.1016/j.jhazmat.2021.128062 ↗