Sustainable utilization of clay minerals-rich engineering muck via alkali activation: Optimization of pore structure by thermal treatment
Source abstract
Abstract
Engineering muck (EM) in South China is a typical construction waste, which has a low utilization rate. After the thermal treatment, this study prepares the EM-based geopolymers and evaluates the CO 2 emission. The calcined EM and the geopolymers were characterized through thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), mercury intrusion porosimetry (MIP), and nuclear magnetic resonance (NMR) spectroscopy. The results showed that when the thermal treatment temperature was 850 °C, the dissolution of aluminum (Al) and silicon (Si) was adequate, significantly enhancing the reactivity of geopolymerization and thus forming a geopolymer with dense structures and excellent mechanical properties. Notably, the compressive strength at 7 days for the geopolymer exceeded 50 MPa, and the cumulative pore volume and pore size distribution were both minimal. In addition, an environmental implication analysis revealed that the recycled geopolymers could reduce carbon emissions by approximately 11–65 kg CO 2/t when compared to conventional concretes, contributing towards low-carbon goals. The findings of this study propose a more environmentally friendly strategy for the treatment of the EM, contributing to the advancement of sustainable solid waste utilization.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Clay minerals and soil interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Utilization of polymer stabilization for improvement of clay microstructures10.1016/j.clay.2014.03.006 ↗
2. Composite materials based on halloysite clay nanotubes and cellulose from Posidonia oceanica sea balls: from films to geopolymers10.1039/D3EN00879G ↗
3. The effect of length and content of fiber on glass fiber and basalt fiber-reinforced granite residual soil
4. Effects of high-temperature exposure on fractal dimension of fly-ash-based geopolymer composites10.1016/j.jmrt.2020.05.034 ↗
5. Marine waste-sources, fate, risks, challenges and research needs
6. Rheological and mechanical properties of 3D printable alkali-activated slag mixtures with addition of nano clay10.1016/j.cemconcomp.2023.104995 ↗
7. Alkali-activation of calcined granitic waste: Reaction mechanisms and environmental implication for waste minimization
8. 29Si NMR study of structural ordering in aluminosilicate geopolymer gels10.1021/la047336x ↗
9. Effects of thermal treatment temperature of kaolinite clays on the properties of geopolymer cements10.1016/j.conbuildmat.2010.12.055 ↗
10. Recycling of landfill wastes (tyres, plastics and glass) in construction - a review on global waste generation, performance, application and future opportunities10.1016/j.resconrec.2021.105745 ↗
11. Thermally treated clay sediments as geopolymer source material10.1016/j.clay.2015.01.027 ↗
12. A low-carbon approach to recycling engineering muck to produce non-sintering lightweight aggregates: Physical properties, microstructure, reaction mechanism, and life cycle assessment10.1016/j.jclepro.2022.135650 ↗
13. Dissolution kinetics of calcined kaolinite and montmorillonite in alkaline conditions: evidence for reactive Al(V) sites10.1111/jace.16663 ↗
14. Preparation of zinc oxide-nanoclay hybrids by alkaline ion exchange method10.1590/0104-6632.20170344s20150570 ↗
15. Production of geopolymer composites enhanced by nano-kaolin material10.1007/s40145-015-0156-y ↗
16. A comparative study of representative 2D microstructures in Shaly and Sandy facies of Opalinus Clay (Mont Terri, Switzerland) inferred form BIB-SEM and MIP methods10.1016/j.marpetgeo.2013.10.009 ↗
17. Effects of calcination conditions on the formation and hydration performance of high-alite white portland cement clinker
18. Calcined illite-chlorite shale as supplementary cementing material: thermal treatment, grinding, color and pozzolanic activity10.1016/j.clay.2019.105143 ↗
19. Thermal activation and alkali dissolution of silicon from illite10.1016/j.clay.2007.08.002 ↗
20. Propensity to telecommute: exploring the national household travel survey10.3141/2231-14 ↗
21. Fractal analysis of relation between strength and pore structure of hardened mortar10.1016/j.conbuildmat.2016.12.152 ↗
22. The corrosion of kaolinite by iron minerals and the effects on geopolymerization10.1016/j.clay.2016.12.040 ↗
23. Reaction kinetics and rheological behaviour of meta-halloysite based geopolymer cured at room temperature: Effect of thermal activation on physicochemical and microstructural properties
24. Fractal characteristics of pore structures in GGBFS-based cement pastes10.1016/j.apsusc.2017.09.165 ↗
25. Structural and chemical properties of thermally treated geopolymer samples10.1016/j.ceramint.2017.02.066 ↗
26. Image analysis techniques for characterization of pore structure of cement-based materials10.1016/0008-8846(94)90004-3 ↗
27. Tropical residual soil stabilization: a powder form material for increasing soil strength10.1016/j.conbuildmat.2017.04.115 ↗
28. Thermal behavior analysis of halloysite selected from Inner Mongolia Autonomous Region in China10.1007/s10973-017-6324-2 ↗
29. Insight into the effect of crystallographic structure on thermal conductivity of kaolinite nanoclay10.1016/j.clay.2019.03.011 ↗
30. Case study on carbon footprint life-cycle assessment for construction delivery stage in China
31. Nucleation and dissociation of carbon dioxide hydrate in the inter- and intra-particle pores of dioctahedral smectite: Mechanistic insights from molecular dynamics simulations10.1016/j.clay.2021.106344 ↗
32. Intrinsic parameters involved in the synthesis of metakaolin based geopolymer: Microstructure analysis10.1016/j.jallcom.2016.07.297 ↗
33. Synergistic recycling of calcined clayey sediments and water potabilization sludge as geopolymer precursors: Upscaling from binders to precast paving cement-free bricks10.1016/j.conbuildmat.2016.12.039 ↗
34. Development of ca(OH)2-based geopolymer for additive manufacturing using construction wastes and nanomaterials
35. Alkali activated metakaolin with high limestone contents - Statistical modeling of strength and environmental and cost analyses10.1016/j.cemconcomp.2019.103450 ↗
36. 29Si and 27Al NMR study of the structural transformation of calcined kaolin residue-based geopolymer using low alkali activator content for sustainable construction materials
37. Properties exhibited by nanomaterial based geopolymers: a review10.1007/s10904-023-02601-3 ↗
38. Effects of metakaolin addition on geopolymer prepared from natural kaolinitic clay10.1016/j.clay.2017.06.019 ↗
39. Recent progress in environmentally friendly geopolymers: a review10.1016/j.scitotenv.2020.143166 ↗
40. Urban solid waste management in the developing world with emphasis on India: challenges and opportunities10.1007/s11157-014-9352-4 ↗
41. Rock material recycling in tunnel engineering
42. Solid-state nuclear magnetic resonance spectroscopy of cements
43. Reexamining thermal treatment of kaolinite for the synthesis of metakaolin geopolymers - roles of dehydroxylation and recrystallization10.1016/j.jnoncrysol.2017.01.024 ↗
44. Geothermal clay-based geopolymer binders: Synthesis and microstructural characterization10.1016/j.clay.2017.05.047 ↗
45. Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer10.1016/j.jclepro.2019.118852 ↗
46. Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials
47. Investigation and application of fractal theory in cement-based materials: a review10.3390/fractalfract5040247 ↗
48. Utilization of calcium carbide residue as solid alkali for preparing fly ash-based geopolymers: dependence of compressive strength and microstructure on calcium carbide residue, water content and curing temperature
49. Solubility of Calcined Kaolinite, Montmorillonite, and Illite in High Molar NaOH and Suitability as Precursors for Geopolymers10.1007/s42860-022-00185-6 ↗
50. Density Functional Modeling of the Local Structure of Kaolinite Subjected to thermal Dehydroxylation10.1021/jp911108d ↗
51. Mechanism of the December 2015 catastrophic landslide at the shenzhen landfill and controlling geotechnical risks of urbanization10.1016/J.ENG.2016.02.005 ↗
52. Mechanical properties of green structural concrete with ultrahigh-volume fly ash10.1016/j.conbuildmat.2017.04.188 ↗
53. Addition of alkaline solutions and fibers for the reinforcement of kaolinite-containing granite residual soil
54. The effect of organic and inorganic modifiers on the physical properties of granite residual soil10.1155/2022/9542258 ↗
55. Sustainability of the polymer SH reinforced recycled granite residual soil: properties, physicochemical mechanism, and applications10.1007/s11368-022-03294-w ↗
56. The effect of different fibers on granite residual soil reinforced with alkaline solution
57. Macroscopic properties and pore structure fractal characteristics of alkali-activated metakaolin-slag composite cementitious materials
58. Determination of the surface fractal dimension for porous media by mercury porosimetry10.1021/ie00043a044 ↗
59. Activating process of geopolymer source material: Kaolinite10.1007/s11595-009-1132-6 ↗
60. Correlations between the sodium adsorption capacity and the thermal behavior of modified kaolinite during the combustion of Zhundong coal10.1016/j.fuel.2018.09.121 ↗
61. Geopolymerization of halloysite via alkali-activation: dependence of microstructures on precalcination
62. Effect of curing conditions on the microstructure and mechanical performance of geopolymers derived from nanosized tubular halloysite
63. Effect of magnesium salt contamination on the microstructures and properties of metakaolinite-based geopolymer: the role of MgCl2 and MgSO410.1016/j.jmrt.2022.09.019 ↗
64. Effect of the SiO2/Al2O3 molar ratio on the microstructure and properties of clay-based geopolymers: a comparative study of kaolinite-based and halloysite-based geopolymers10.1007/s42860-023-00223-x ↗
65. Effects of pretreated recycled powder substitution on mechanical properties and microstructures of alkali-activated cement10.1016/j.conbuildmat.2023.133360 ↗
66. Recycling and optimum utilization of engineering sediment waste into low-carbon geopolymer paste for sustainable infrastructure10.1016/j.jclepro.2022.135549 ↗
67. Experimental study on the stability of C-S-H nanostructures with varying bulk CaO/SiO2 ratios under cryogenic attack10.1016/j.cemconres.2020.106114 ↗