Workability of clay mixtures
Source abstract
Abstract
Abstract Raw clays undergo mixing for the manufacture of structural clay products and ball clays and kaolins are carefully selected, processed, stored and blended in various proportions to produce consistent formulations for the wide range of fine ceramic products. The effects of blending different clays with a range of proportions have been investigated on the Atterberg plasticity limits and on the toughness-water content relationships. It is demonstrated that blending of raw and processed clays with different mineralogy and plasticity properties can produce liquid and plastic limits and toughness-water content relationships that do not follow a linear interpolation between the individual properties of the clays in relation to their proportions. Mixing of high plasticity clay with a lower plasticity clay produced a wider range of water contents over which the mixtures remained plastic, particularly with lower water contents which would be desirable when considering shrinkage properties. However, this resulted in increased toughness and harder workability, a less desirable factor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Measuring the plasticity of clays: a review10.1016/j.clay.2010.10.028 ↗
2. Significance of specimen preparation upon soil plasticity10.1520/GTJ10621J ↗
3. ASTM D4318-17 · 2017
4. Uber die physikalische Bodenuntersuchung und uber die Plastizitat der tone (On the physical testing of soil and the plasticity of clays)
5. An apparatus for the plastic limit and workability of soils
6. An apparatus for the determination of the workability and plastic limit of clays10.1016/j.clay.2013.04.014 ↗
7. Barnes · 2013
8. Methods of test for soils for civil engineering purposes
9. Classification and identification of soils
10. Dinsdale · 1986
11. Physical properties of raw brick clays
12. Rheology and extrudability of ceramic compounds
13. Test methods for plasticity and extrusion behaviour
14. 2009
15. ISO/TS 17892-12 · 2004
16. A study of the Atterberg plasticity method
17. Determination of clay plasticity: indentation method versus Pfefferkorn method10.1016/j.clay.2007.06.007 ↗
18. Two instruments for studying the plasticity of clays10.1088/0950-7671/40/5/314 ↗
19. An instrument for measuring the workability of clays10.1111/j.1151-2916.1938.tb15727.x ↗
20. Further developments on torsional apparatus for measuring plasticity10.1111/j.1151-2916.1929.tb16212.x ↗
21. Clay materials used in construction
22. Plastic behaviour of different ceramic pastes processed by extrusion10.1016/j.ceramint.2004.06.016 ↗
23. Whitewares production, testing and quality control
24. The plastic behavior of some ceramic clays
25. Ceramics Raw Materials