journal article·2018-06Open access

Characterization of a New Fully Recycled Carbon Fiber Reinforced Composite Subjected to High Strain Rate Tension

H. Meftah, S. Tamboura, J. Fitoussi, H. BenDaly, A. Tcharkhtchi

Applied Composite Materials· Volume 25· Issue 3

Abstract

The aim of this study is the complete physicochemical characterization and strain rate effect multi-scale analysis of a new fully recycled carbon fiber reinforced composites for automotive crash application. Two composites made of 20% wt short recycled carbon fibers (CF) are obtained by injection molding. The morphology and the degree of dispersion of CF in the matrixes were examined using a new ultrasonic method and SEM. High strain tensile behavior up to 100 s-1 is investigated. In order to avoid perturbation due to inertial effect and wave propagation, the specimen geometry was optimized. The elastic properties appear to be insensitive to the strain rate. However, a high strain rate effect on the local visco-plasticity of the matrix and fiber/matrix interface visco-damageable behavior is emphasized. The predominant damage mechanisms evolve from generalized matrix local ductility at low strain rate regime to fiber/matrix interface debonding and fibers pull-out at high strain rate regime.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Bos, G.: EU waste legislation and the composites industry. Seminar on recycling of composite materials, IFP SICOMP, Molndal, Sweden; 14th–15th May (2002)
2. Pimenta, S., Pinho, S.T.: Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook. Waste Manag. 31(2), 378–392 (2011)10.1016/j.wasman.2010.09.019 ↗
3. Pickering, S.J.: Recycling technologies for thermoset composite materials – current status. Composites Part A. 37(8), 1206–1215 (2006)10.1016/j.compositesa.2005.05.030 ↗
4. Feih, S., Mouritz, A.P., Case, S.W.: Determining the mechanism controlling glass fiber strength loss during thermal recycling of waste composites. Compos A: Appl Sci Manuf. 76, 255–261 (2015)10.1016/j.compositesa.2015.06.006 ↗
5. Yang, L., Sáez, E.R., Nagel, U., Thomason, J.L.: Can thermally degraded glass fiber be regenerated for closed-loop recycling of thermosetting composites? Compos A: Appl Sci Manuf. 72, 167–174 (2015)10.1016/j.compositesa.2015.01.030 ↗
6. Suzuki T, Takahashi J. Prediction of energy intensity of carbon fiber reinforced plastics for mass-produced passenger cars. The Ninth Japan International SAMPE symposium, November 29–December (2005)
7. Pickering, S.J., Kelly, R., Kennerley, J.R., Rudd, C.D., Fenwick, N.J.: A fluidised–bed process for the recovery of glass fibres from scrap thermoset composite. Compos Sci Technol. 60(4), 509–523 (2000)10.1016/S0266-3538(99)00154-2 ↗
8. Davidson J. Carbon fiber composites: advancements in reclamation processes and recycled material forms. Composites innovation 2007 conference proceedings. Spain: Barcelona; October 4–5, (2007)
9. Witik Robert, A., Teuscher, R., Michaud, V., Ludwig, C., Manson, J.-A.E.: Carbon fiber reinforced composite waste: an environmental assessment of recycling, energy recovery and landfilling. Compos A: Appl Sci Manuf. 49, 89–99 (2013)10.1016/j.compositesa.2013.02.009 ↗
10. Pimenta S, Pinho ST, Robinson GS. Experimental study on the mechanical performance of recycled CFRP. ICCM 17, Edinburgh, July 27–31, (2009)
11. Yip HLH, Pickering SJ, Rudd CD. Characterisation of carbon fibres recycled from scrap composites using fluidised bed process. Plastics, Rubber and Composites: Macromolecular Engineering. 31,(6): University of Nottingham (2002)10.1179/146580102225003047 ↗
12. Jendli, Z., Fitoussi, J., Meraghni, F., Baptiste, D.: Anisotropic strain rate effects on the fibre–matrix interface decohesion in sheet moulding compound composites. Compos Sci Technol. 65(3–4), 387–393 (2005)10.1016/j.compscitech.2004.09.027 ↗
13. Esmaeillou, B., Fitoussi, J., Lucas, A., Tcharkhtchi, A.: Multi-scale experimental analysis of the tension-tension fatigue behavior of a short glass fiber reinforced polyamide composite. Procedia Engineering. 10, 2117–2122 (2011)10.1016/j.proeng.2011.04.350 ↗
14. Sichina, W.J.: Thermal Analysis for the Characterization of Polymer Impact Resistance. (2000)
15. Man Night, M.J., Paul, K.F.E.D.R., Newman, S.: Polymer Blends, vol. 1, p. 185. Academic Press, New York (1978)10.1016/B978-0-12-546801-5.50011-6 ↗
16. Namita Rry Choudhury, Chaki T.K, BhowmIick, Anil K. Thermal characterization of thermoplastic elastomeric natural rubber-polypropylene blends. Thermochim Acta, 176 (1991) 149–161 Elsevier Science Publishers B.V., Amsterdam
17. Locke, C.E., Paul, D.R.: Chlorinated polyethylene modification of blends derived from waste plastics. Part II: Mechanism of modification Polymer Engineering & Science. 13(4), 308–318 (1973)
18. Fitoussi, J., Meraghni, F., Jendli, Z., Hug, G., Baptiste, D.: Experimental methodology for high strain-rates tensile behavior analysis of polymer matrix composites. Compos Sci Technol. 65(14), 2174e88 (2005)10.1016/j.compscitech.2005.05.001 ↗
19. Shirinbayan, M., Fitoussi, J., Meraghni, F., Surowiec, B., Bocquet, M., Tcharkhtchi, A.: High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension. Compos Part B. 82(1), 30–41 (2015)10.1016/j.compositesb.2015.07.010 ↗
20. Barré, S., Chotard, T., Benzaggagh, M.L.: Comparative study of strain rate effects on mechanical properties of glass fiber reinforced thermoset matrix composites. Compos A: Appl Sci Manuf. 27(12), 1169–1181 (1996)10.1016/1359-835X(96)00075-9 ↗
21. HKS, Inc. ABAQUS theory and users manuals. V. 6.2.1; (2001)
22. Pardo, S., Baptiste, D., Décobert, F., Fitoussi, J., Joannic, R.: Tensile dynamic behaviour of a quasi-unidirectional E-glass/polyester composite. Compos Sci Technol. 62(4), 579–584 (2002)10.1016/S0266-3538(01)00152-X ↗
23. Joseph, F., Michel, B., Fodil, M.: Effect of the matrix behavior on the damage of ethylene–propylene glass fiber reinforced composite subjected to high strain rate tension. Compos Part B. 45(1), 1181–1191 (2013)10.1016/j.compositesb.2012.06.011 ↗
24. Komalan, C., George, K., Kumar, P., Varughese, K., Thomas, S.: Dynamic mechanical analysis of binary and ternary polymer blends based on nylon copolymer/ EPDM rubber and EPM grafted maleic anhydride compatibilizer. Express Polym Lett. 1(10), 641e53 (2007)10.3144/expresspolymlett.2007.88 ↗
25. Dedecker, K., Groeninckx, G.: Reactive compatibilization of A/(B/C) polymer blends. Part 2. Analysis of the phase inversion region and the co-continuous phase morphology. Polymer. 39((21), 4993e5000 (1998)
26. Nitta, K.H., Shin, Y.W., Hashiguchi, H., Tanimoto, S., Terano, M.: Polymer. 46, 965 (2005)10.1016/j.polymer.2004.11.033 ↗
27. Nitta, K.H., Kawada, T., Yamahiro, M., Mori, H., Terano, M.: Polymer. 41, 6765 (2000)10.1016/S0032-3861(99)00895-2 ↗
28. Fitoussi, J., Meraghni, F., Jendli, Z., Hug, G., Baptiste, D.: Experimental methodology for high strain-rates tensile behaviour analysis of polymer matrix composites. Compos Sci Technol. 65(14), 2174–2188 (2005)10.1016/j.compscitech.2005.05.001 ↗